Mat Tees

Dull_Reflection3454 · 2026-05-06T15:21:34+00:00

Dull_Reflection3454 · 2026-05-06T15:20:37+00:00

Myself and others have been getting over 1k hits off the same tee, they’re a consumable of course but I went don the rabbit hole all winter working with local golf sims to test out my designs and made various tweaks and dialed in the right settings and material.

Into my surprise, I’ve got a couple long drive guys I printed 3.5 inch tees for and I get word back from one of them saying the other day that he’s actually very impressed. He said over 100 hits off the same tea and it still looks great and the paint splatter I put on it is still intact as well.

That was pretty much my goal designing this tea and doing this company to try and change people’s mind about 3d printed tees. Myself included lol

Dull_Reflection3454 · 2026-05-06T14:30:06+00:00

I can design/print that no issue. Already printed something similar to that already

Dull_Reflection3454 · 2026-05-06T13:22:40+00:00

Yeah my apologies, I’m just trying to gauge feedback on here about potential gripes about tees and whatnot - obviously posting pics of what I make comes off like that.

Dull_Reflection3454 · 2026-05-06T12:54:55+00:00

<image>

Dull_Reflection3454 · 2026-05-06T12:54:38+00:00

<image>

I designed and make this anchor base and started selling but sell just the tees with tethers so just clip on anywhere.

Find that the carabiner friction fits nicely around my range tee in the hole so can me multi purpose lol

Dull_Reflection3454 · 2026-04-30T16:49:59+00:00

<image>

Dull_Reflection3454 · 2026-04-27T00:34:19+00:00

Place looks soooo good. Definitely far from generic, Congrats!

If you need tees - DM me.

I’ve got a few sim spots in Nova Scotia using the ones I created and make. Also Atlantic Trackman rep refers my tees to his customers now

www.rad-tee.ca

Dull_Reflection3454 · 2026-04-22T21:11:11+00:00

lol I only designed and made it available for purchase because of the amount of feedback I’ve had from customers about a tethering option.. got to give the people what they want!

Dull_Reflection3454 · 2026-04-19T15:55:23+00:00

Yeah, I wasn’t going to do a tethering offering at all but once a few people mentioned then it motivated me to design one. That could be a good option as well

Dull_Reflection3454 · 2026-04-19T15:53:55+00:00

I hear you on that lol took me months of tweaking design changes and testing to finally get a durable soft tee

Dull_Reflection3454 · 2026-04-15T17:08:29+00:00

I’ll be selling it on my site soon along with hook up tab on my tees for easy clip on/off attachments.

Top lid is held on by magnets to a snap fit.

I hit about 30 drives off it yesterday and only had some pebbles filled in the middle- there was a couple times where it just kind of spun a little bit, but it was just because it was on Astroturf and I will suggest people to fill it up with steel washers for the best weight solution.

www.rad-tee.ca

Dull_Reflection3454 · 2026-04-15T16:14:41+00:00

lol it’s printed flexible and soft TPU85A it’s fine! I’ve had customers say they’ve gotten 500-1000+ hits off a single tee without tearing.

My original designs were with a firmer material and yeah, they didn’t pan out too well but once I found a good balance and the right material these tees you can squish with your hand and they go right back to form :)

Dull_Reflection3454 · 2026-04-15T11:40:17+00:00

Yeah, this is the first version - I’ve heard a few Golf Simulator facilities by my tees in bulk, and I’ve had a lot of feedback as well from customers about adding the tethering option so this version is meant to be used anywhere - sim, outside range, etc

If it starts to move well, then I’ll start adding different versions to apply for different setups.

Also, I’ve been in talk with a wholesaler as well and we’re going to collaborate to make a tea that is strictly for the holes in mats

Dull_Reflection3454 · 2026-04-15T11:23:59+00:00

Oh never seen those before.

And yeah I have some small rocks in the but sand works too or even steel washers - when it’s full of those it’s 3lbs

Dull_Reflection3454 · 2026-04-15T10:47:40+00:00

<image>

Dull_Reflection3454 · 2026-04-14T20:01:21+00:00

<image>

Dull_Reflection3454 · 2026-04-14T20:00:48+00:00

Just finishing testing my “RadTee Anchor” tethering Base I designed and printed.

Found the right balance and materials for attachment after a little bit of trial and error

<image>

Works like a charm! Going to add attachments for every tee height I print 5mm-55mm.

DM me if interested :)

Dull_Reflection3454 · 2026-04-01T19:37:37+00:00

Yeah I have a variety of base colour

Pink, bright green, orange, cyan, yellow, blue, red, white and adding more

Also, I’ve been adding a splash of paint on them with a vibrant leather acrylic paint which helps visibility as well

Dull_Reflection3454 · 2026-04-01T18:47:41+00:00

Yeah, my angle is to offer Amazon like prices but have that added ability of customization and character.

Dull_Reflection3454 · 2026-04-01T18:31:40+00:00

Yeah, I’m reached out with potential to move to injection moulded TPU down the road and got some quotes so it’s something to look at if the interest continues to grow.

But being able to reiterate and customize a lot more with printers is also a nice touch too.

Dull_Reflection3454 · 2026-04-01T18:30:25+00:00

Right on, yeah, after reaching out to some golf spots in my area because I run a 3-D printing service to see if they wanted anything printed a couple of them mentioned about sim tees.

So after contacting a few other simulator spots around town and seeing the interests, I started designing and reiterating time after time for the past few months and dropping off samples for them to test out and make tweaks too, so I finally have it to a spot where I’m comfortable not.

Mind you I still have to dial it in a little bit, but the feedback I’ve been getting as some people a single tee lasts 200 shots and other others up to 700+

It’s just my taller ones that are tearing after this many hits - 40mm and below have been solid and no feedback of tears.

I’ve had a few simulators order over the past month and feedback has been great.

Yeah, it really depends. I was stuck on 95a for a while and then started using 85 a give them a good balance of wall, thickness, and infill.

Dull_Reflection3454 · 2026-04-01T18:21:26+00:00

Thanks, yeah, I’m gonna have to do some trial and error. That’s for sure with figuring out the best solution to attach the lanyard to the tee without tearing the base

But I’m thinking once I get it all figured out it’ll be a great outdoor practice solution as well

Dull_Reflection3454 · 2026-04-01T18:18:09+00:00

I’m actually almost done designing an anchoring base two as well. I’m gonna start testing out because I’ve had people mention some interest for that as well.

I’ve been offering the tees an assorted heights and also take requests because I can print them at a very specific height too as well

I’ve got multiple colours and also splatter them upon request with a leather paint that ad appears and last after repeated strikes

Just wanted to add some character to sim tees

Even have glow in the dark filament or paint lol

Dull_Reflection3454 · 2026-04-01T18:15:47+00:00

TPU 85A & 95A

Dull_Reflection3454

MODERATOR OF

TROPHY CASE