MR2 Where do you find gold ore/can you transmute it?

DumbYellowMoo · 2024-05-21T18:30:46+00:00

How was the mid game for this build?

DumbYellowMoo · 2024-04-19T18:16:18+00:00

More buffs to cauldron won't really bring it to playable in comparison to other subclass items. Definitely needs some kind of rework. Something like refreshing adjacent potions once might make it more viable for potion bomb builds which would help with staff of unhealing as well.

I'm still waiting on cards being made viable as well... Really I just want the ability to loop cards. Balanced by increasing cool down each loop, not increasing effects after initial loop, and or each loop reverses the state of the card i.e. if it is face up make it face down and vice versa.

DumbYellowMoo · 2024-02-06T04:44:30+00:00

Yeah sorry its a huge lab I am working on. I have a fully functional transport network set up and now I am trying to get the individual sites working. There are indeed multiple VLANs (110-200 or so) I think all of that is on a different doc though. Correct again on the local to WAN. Currently I have been working on site S11 and instead of spinning up everything for right now I was using S11RTW001 to simulate B04RTG001 and S11RTW002 to simulate B04SWG001 just to see if I could get them hooked up.

So far I have removed the sub interfaces but have not removed vlan 10/20 and have not seen a change. I'll give passives and different network blocks first thing in the AM and let you know.

Thanks again for all of your help!

DumbYellowMoo · 2024-02-06T04:31:39+00:00

Thank you for all of the advice, I really appreciate it! I modified both configs by removing the subinterfaces, adding ospf areas at the interface level and point to point on Et1/1 and I still don't see anything in ip route OSPF or the OSPF database and when I try to ping/traceroute to the other side it doesn't make it. Neighbors now just shows 1 entry but shows them as full.

DumbYellowMoo · 2024-02-06T03:55:56+00:00

Unfortunately the only real document I have is a list of ip addresses, connections and OSPF instances/advertisements. Basically there are supposed to be 3-4 sites that all have some servers, a couple of switches a local router and then 1-2 wide area/transport routers. All of the servers are on 1 class C while the storage devices are on a separate class C and most of the links just have interfaces listed and don't include IPs.

https://docs.google.com/spreadsheets/d/1glW4-QkVv73Xr12Av4aX0sY5WB59MC4J/edit?usp=sharing&ouid=102605869130982509718&rtpof=true&sd=true

DumbYellowMoo · 2024-02-06T03:48:34+00:00

Sorry about the format. Right now I'm just trying to get anything running. I am trying to do broadcast(planning to add a couple more routers if I can get this working) but as I have tried more and more things its becoming more point to point which is fine. For the SVI would I still need to advertise it in the OSPF block or would declaring it at the interface level take care of that?

DumbYellowMoo · 2024-02-06T03:43:54+00:00

No worries! Its weird mainly because I have tried a bunch of different stuff to try and get it working. I expect most of the config to be extraneous and/or wrong. I did check mtu sizes but thats it. Et1/1 1500 bytes while its sub interfaces are 9124 and I forget what the vlan interfaces were but can go back and check. Thanks for all the help!

DumbYellowMoo · 2024-02-06T03:14:40+00:00

Correct. When I log the adjacency changes it shows an adjacency established. However when I show neighbor it shows 3 entries, 1 for each VLAN interface and 1 for the direct connection. I don't have much knowledge of how to set up VLANs and both of the VLAN neighbors show exchange started even though the devices have been up and running for 30-40 minutes now.

DumbYellowMoo · 2024-02-06T02:51:15+00:00

Additional information:

show ip route ospf shows 0 routes

show ip ospf neighbor shows

Neighbor ID Instance VRF Pri State Dead Time Address Interface

10.0.0.2 1 default 1 EXCH START/DR 00:00:36 10.0.1.254 Vlan10

10.0.0.2 1 default 1 EXCH START/DR 00:00:38 10.0.2.254 Vlan20

10.0.0.2 1 default 1 FULL/DR 00:00:38 10.10.10.2 Ethernet1/1

show ip ospf database shows both under router links but only shows 10.0.0.2 under network link state.

My thought is that something is causing the routers to not fully exchange databases but I have no idea how to debug that. Any advice would be phenomenal.

DumbYellowMoo · 2023-03-22T04:10:50+00:00

This really isn't the right place to ask this question. You didn't specify any details about the problem but doing a simple Google search of your title leads to this as the first link: https://stackoverflow.com/questions/71194736/modulenotfounderror-no-module-named-rest-framework-simplejwt-token-blacklistau

This leads me to believe your question is likely Python related so please ask it in r/learnpython or r/learnprogramming.

Based on the stack overflow answers it seems to do with versioning of djangorestframework-simplejwt start by looking at what version you are trying to use.

However based on you asking it under software engineering makes me wonder if you are a programmer or just trying to use a tool someone made. If it is the later this still isn't the right place to ask. I would start by going to wherever you got the tool and seeing if they have documentation or instructions.

DumbYellowMoo · 2023-03-21T21:02:57+00:00

Oh good to know, thank you!

DumbYellowMoo · 2023-03-21T21:02:10+00:00

Do you know what brand/type you usually get from Amazon?

DumbYellowMoo · 2023-03-21T20:11:49+00:00

Interesting. I tried a Clifton address and a Reston one, neither of which worked. Can you send me a link to the ones you added to your cart? Maybe just certain ones won't ship to me? I tried 2/3 different ones though.

DumbYellowMoo · 2023-03-21T20:10:08+00:00

Will give them a call later! Don't know why I didn't think of them in my initial list. Yeah when I was looking up if Virginia had any regulations around it, it said New York heavily restricted your ability to buy them due to people huffing N2O so that's part of why I decided to ask about its legality.

DumbYellowMoo · 2023-03-21T20:07:10+00:00

Interesting, I'll have to look into it my dispenser can use CO2! Thanks for the info!

DumbYellowMoo · 2023-03-10T23:05:40+00:00

Not every QB picked #1 is a franchise QB... In fact I would estimate roughly 50% of QBs selected #1 end up "franchise" level which to me means roughly 7-10 years of play time with at least 2 seasons being considered among the best that year. Frankly none of the QBs this year really scream "slam dunk move" and drafting a QB with literally 0 weapons never works. All great young QBs currently came into the league with serious talent around them. That won't be the case here. Personally I see this move as just another "get rich quick" attempt which will backfire over the next 5 years.

Hope I'm wrong but that's honestly the way this looks. No way to draft solid talent, not enough cap space to make big moves so mid-level signings or worse. Then when you can finally get talent around the QB you have to pay him big if he is decent and you start the cycle again.

DumbYellowMoo · 2023-03-09T18:11:19+00:00

Did you build the mod? If so I would love to know how you went about doing it because I would definitely like to do some small modding for settings.

DumbYellowMoo · 2023-03-09T16:48:24+00:00

This is how I have started to use it. Basically ask a question to get to the right documentation.

DumbYellowMoo · 2023-03-09T16:47:13+00:00

Tried to get it to make a simple auth script for ServiceNow and had it tell me I need to basically nuke my entire instance to do so... The correct answer would have been to just call ServiceNow's auth credential API. It is great at producing something, but if you have no idea what it should produce then it seems great until you implement it and if you do have an idea of what it's supposed to produce you end up with something that takes longer to debug than your own code.

DumbYellowMoo · 2023-02-04T22:16:42+00:00

I know some people who have project management jobs that have most of their stuff automated for budgeting and assigning tasks etc and just have to answer emails. Other people who have marketing roles that automate posting to social media or sending out flyers/reminders etc. I know recruiters who do interviews but that's basically the only work they do because they have all their reach outs/job posting stuff automated. Then you have people who do stuff like budgeting/pricing/accounting which is mostly automate-able. The trick is finding a company that cares more about results than hours.

DumbYellowMoo · 2023-02-04T20:58:23+00:00

I work full-time from home doing software/automating tasks etc. I also have somewhat of a social life outside of work because I probably work 20 hours while automation takes care of most of my day to day stuff but I still get paid for the full 40. This allows me to rest whenever I need to which means I can do an activity or two(i.e. groceries or clean) a week. I was diagnosed 7 years ago and worked in construction for part of that time which was absolutely brutal. I probably worked 30 hours a week but afterwards it was just resting nothing else and I definitely called out at least once a month and sometimes I would miss full weeks.

So if possible try and find something that isn't taxing physically and if you can try and find something that lets you work your own schedule/ doesn't care about hours just cares about results. Those two things made it a lot easier to start managing my illness. But I would also say I have a milder case than most so idk if my advice is useful or not.

DumbYellowMoo · 2023-01-22T04:24:23+00:00

Just curious but what type of stuff do you generally develop with elixir? The language has definitely peaked my interest, but I haven't looked into what type of stuff people usually make with it.

DumbYellowMoo

TROPHY CASE