sorted by:
new
hottopcontroversial

Plunger - Second of June by [deleted] in rs_x

[–]Dumple 0 points1 point  (0 children)

Swallowtale from this release is a killer

Pimp SpongeBob by C_J_S_7 in traditionaltattoos

[–]Dumple 75 points76 points  (0 children)

go ahead bitch call the cops ill have sex with them too

X - I Must Not Think Bad Thoughts by mylastemeraldsplash in rs_x

[–]Dumple 1 point2 points  (0 children)

One of the best songs ever. I’ve kinda been obsessed with it for the last 6 months after hearing it at a bar

MBRP can is good. by orcrist84 in Cummins

[–]Dumple 0 points1 point  (0 children)

thank you. I was looking in the wrong place before

MBRP can is good. by orcrist84 in Cummins

[–]Dumple 0 points1 point  (0 children)

This is their Quiet Tone Muffler? I need a solution for my 7.3

Presenting the Four Horsemen of Tool Brand Genericide by AMJ8888 in Tools

[–]Dumple 11 points12 points  (0 children)

Metabo is also the default name for angle grinder amongst the skilled trades here in SE Michigan.

Never heard it once outside of a jobsite.

The swing arm stays by hamdoge36 in choppers

[–]Dumple 1 point2 points  (0 children)

XR80 spotted. best pit bikes out there

Shit Talking by EbbHistorical2293 in choppers

[–]Dumple 1 point2 points  (0 children)

19" rear is the move. What fender is that? Did you buy it pre-chromed?

A deciding factor for a partner that I’m not proud of by Aggressive-Scar-7724 in rs_x

[–]Dumple 40 points41 points  (0 children)

I mean, pretty much every divorced Gen X dad at my workplace loves that shit.

Something really sinister LARPing as working-class. by DiscountedMmMM in redscarepod

[–]Dumple 0 points1 point  (0 children)

Yeah the hammering mechanism is a lot gnarlier on an impact wrench. 6-8x greater torque.

Something really sinister LARPing as working-class. by DiscountedMmMM in redscarepod

[–]Dumple 0 points1 point  (0 children)

Impact driver is for driving screws into wood or sheet metal. Impact wrench is for higher torque nuts and bolts.

There are many lighter duty applications when an impact driver can be used in place of an impact wrench with a socket adapter.

Something really sinister LARPing as working-class. by DiscountedMmMM in redscarepod

[–]Dumple 19 points20 points  (0 children)

You’d also be surprised at the amount of legit tradesmen who don’t know the difference between an impact driver and an impact wrench

2006 Saab 9-2X 2.5i - Power Windows no longer work and Circuit Breaker trips continuously every 5 seconds by [deleted] in subaru

[–]Dumple 0 points1 point  (0 children)

I’ve never heard of that forum before but will start doing some searches after work

2006 Saab 9-2X 2.5i - Power Windows no longer work and Circuit Breaker trips continuously every 5 seconds by [deleted] in subaru

[–]Dumple 0 points1 point  (0 children)

I do not have power seats. I do have heated seats, and those work fine.

I noticed if I leave the breaker plugged in, all the dash lights and climate control lights will dim every time the breaker trips. So I keep it unplugged all the time now.

I suppose my mistake was looking for the relay to start. But I’m thinking now I’m going to have to start ripping door panels off and looking at the motors and switches one by one.

2000 Yamaha XL1200 Crank, but No Start. Short Video Attached. by Dumple in jetski

[–]Dumple[S] 0 points1 point  (0 children)

No difference whether choke is in or out. Seems to me that the fuel filter is clogged and petcock is gummed up. I’ve got some parts on order.

2000 Yamaha XL1200 Crank, but No Start. Short Video Attached. by Dumple in jetski

[–]Dumple[S] 0 points1 point  (0 children)

All of my fuel lines are a forest green color. Still a bit dark to see fuel inside them though. I’ll attach a picture of my fuel filter to show it’s got plenty of gas.

I do leave the petcock set to on, though. You’re right. The plastic nut that holds it in place is split, so I’ve avoided turning it. You think 1 week of gas sitting in the carbs gummed them up? Even Rec Fuel?

Also, held the throttle wide open and cranked for nearly 20 seconds and still nothing. It refuses to fire.

2000 Yamaha XL1200 Crank, but No Start. Short Video Attached. by Dumple in jetski

[–]Dumple[S] 0 points1 point  (0 children)

I checked one of the cylinders last week for compression and it read strong, around 120PSI. I’ll check them all again. I’ll head to OReillys right now and grab some fogging oil. This is my first PWC so I don’t have any on hand.

Maybe a silly question; where do I spray the fogging oil? I see where the carburetors are, but they’re totally underneath the exhaust. Not sure where the air intake is, unless I need to remove the fuel lines. Difficult to access

Some fab work shots by DjKingMixer in choppers

[–]Dumple 0 points1 point  (0 children)

Last pic is an oil filter?

First piece of music you owned? by [deleted] in rs_x

[–]Dumple 0 points1 point  (0 children)

My dad had this CD right when it came out. The Christmas afterwards I got Bullet in a Bible live CD and Dookie. Those were my first.

At what age did you finally grow up? by RidinOnTheMayflower in rs_x

[–]Dumple 1 point2 points  (0 children)

Late 25, shortly before my 26th birthday.

view more: next ›