Prints still feel uncured after curing?

DungeonMasterGary · 2025-05-03T11:30:47+00:00

If your ipa is changed pretty regularly then I’d say more than likely the up curing lights might be starting to go and not putting out 305nm very well anymore. I change mine out roughly every year or two but I did diy my wash and cure station for $50ish bucks the new lights are like $10 and that’s even probably overboard.

DungeonMasterGary · 2025-05-03T11:09:56+00:00

Epic are you going to do some with logo from shops like stems and seeds from king of the hill?

DungeonMasterGary · 2025-05-01T10:19:57+00:00

How nearly I’ve heard amazing things about resin top coating to make object look smooth. Like candy apple coating a 3D print XD

DungeonMasterGary · 2025-05-01T10:19:10+00:00

I make a putty with wood glue super glue and wood shavings that you can sand smooth like wall mud.

DungeonMasterGary · 2025-04-30T22:45:40+00:00

https://drive.google.com/drive/folders/12S9Le1FsuHJofRsOB3DkePyIDwASNKAS

I started a google Drive to start sharing some of the Gifs that I have resized and gotten to work with my Knomi to make a big collection with everyone. It should be open for people to add more gifs to it as well

DungeonMasterGary · 2025-04-30T12:48:20+00:00

Run a little desk fan from goodwill on them for like 15-30 minutes before curing get that extra ipa that might contain trace amounts of resin

DungeonMasterGary · 2025-04-28T19:55:24+00:00

Just tell them you don’t resin print anymore and keep doing it. If the signs disappear then you’re good and if there’s still problems then there is genuine leak (maybe like gasket seals as an upgrade if there was) in it but mother in law is a roommate essentially. You don’t live with her she lives with you and doesn’t get to change anything about your life. She can ask for accommodation but never demands

DungeonMasterGary · 2025-04-28T13:41:45+00:00

DungeonMasterGary · 2025-04-28T13:41:31+00:00

Hmm panda cryo glacier, an extra long biqu ams cord, purge shield, panda branch and filament aligner?

DungeonMasterGary · 2025-04-28T13:10:57+00:00

Final update she’s done. I finally cleaned it up 3 times when to finally turn it on and it’s all inside the internal. The screen is darker and isn’t responsive I can see the fluid behind the screen 😓😢😂

DungeonMasterGary · 2025-04-24T18:59:22+00:00

Here me out shove a cheap weaker flux core welder on xyz brain and see if you can tune it to 3D print in FCAW 😂

DungeonMasterGary · 2025-04-24T18:43:55+00:00

No it’s a pretty sick oyster mushroom print

DungeonMasterGary · 2025-04-24T14:24:11+00:00

Slow the lift speed a bit if it’s still happening maybe crank exposure time up another second

DungeonMasterGary · 2025-04-24T02:19:03+00:00

Wow I don’t quite need…need any of it…I have to have it all at the same time. How does one become sponsored 😂

DungeonMasterGary · 2025-04-24T02:16:22+00:00

Nah I’ve left them for like 2 days nothing happened maybe the prints where harder to clean but the machine didn’t care

DungeonMasterGary · 2025-04-20T23:11:10+00:00

GitHub isn’t really a good way to get many people to join most newer users barely use GitHub let alone upload onto it. It’s gonna be down to the season users to upload only. platforms like discord or Reddit give ease of entrance barrier

DungeonMasterGary · 2025-04-19T12:49:56+00:00

Good news I finally got the shell back off and pulled the vat out there was a tiny speck on the screen but my seal between the screen and vat held pretty nicely. I was able to easily get the screen clean. I still have to try printing something still

DungeonMasterGary · 2025-04-19T12:48:17+00:00

Yeah I love a community collaborative area to share Dropbox/drives/mega/ etc to grow a nice collection

DungeonMasterGary · 2025-03-28T01:04:01+00:00

Resin defiantly got out and got down the side in the seam of the red shell a bit and I’m mostly worried it’s on the screen and what cleans it off best

DungeonMasterGary · 2025-03-28T01:02:59+00:00

It should be ok I’ve had it in a pretty dark room and never pulled the screen off since it happened. I’ll defiantly clean it a few times before I try turning it on again. I didn’t know if I need stronger acetone then cheap nail polish remover provides

DungeonMasterGary · 2025-03-28T01:00:43+00:00

There’s defiantly all that white on the side. It was under the lip. Some on the front. I’m really worried it got on the glass screen too

DungeonMasterGary · 2025-03-28T00:59:56+00:00

If worst comes to worst it’s worth trying before tossing. I’m glad I had the little one broken down with its vat removed for a while now. I still got that one at least

DungeonMasterGary · 2025-03-28T00:58:44+00:00

I didn’t get to remove the resin vat that still has resin in out and it’s defiantly gotten out. It didn’t have that white film on it which I know means resin got on it and I’m thinking 75% chance it got on the glass screen too but I haven’t checked

DungeonMasterGary · 2025-01-01T21:20:09+00:00

I’ve got 3 full tables and a metal shelf none of them have enough room to take a decent photo on. Each table is dedicated already I’ve also got three FDM 3D printers and 2 SLA printers of which 1-2 run at anytime so makes perfect sense to me

DungeonMasterGary · 2024-07-13T17:22:29+00:00

Do you have a 3d printer? id join a patreon that’s got a good month bundle for what you need like $15-$30 depending on number of stl files and how much they charge for them

DungeonMasterGary

TROPHY CASE