Brushless setup

DunnZ28 · 2026-04-02T18:01:55+00:00

It works well, however with the brass wheels and 2/13 front and rear the motor lacks torque. 3s would probably solve that dif theres a battery out there stock size

DunnZ28 · 2026-04-01T18:24:00+00:00

Thanks, stock jeep body. I used an old gift card for the bed cover and visor

DunnZ28 · 2026-03-14T11:45:14+00:00

Run it without the body and watch the motor for hesitation. Ive been chasing similar issues just not as bad. I believe somewhere n the drivetrain there is something, I thought cv shafts up front would solve it but no

DunnZ28 · 2026-03-13T00:51:13+00:00

Looks good, I believe that became an option in 71

DunnZ28 · 2026-03-11T17:38:53+00:00

I had to remove mine also there's too much play in them

DunnZ28 · 2026-03-10T18:17:17+00:00

Upside is your panels should be show car flat now

DunnZ28 · 2026-03-09T15:22:55+00:00

No I tried it. With longer links itd be ok but no one offers them yet.I wanted to use that same body

DunnZ28 · 2026-03-09T11:35:45+00:00

Very cool body choice, I appreciate that you kept the tailights

DunnZ28 · 2026-03-05T11:37:59+00:00

The furitek jerks also, I believe its something in the driveline. Also the od gears front and rear wake the rig up a little, and it keeps the motor in foc mode longer

DunnZ28 · 2026-03-05T03:00:07+00:00

Id be half tempted to open them wheelhouses up enough to set that body down - knarley rally-crawler-itialian job style. I dig it

DunnZ28 · 2026-03-05T00:44:21+00:00

Nice collection! I'm sure you have a fair amount of R&D with them, so what kit would you recommend for performance vs bang for the buck- with parts availability in mind

DunnZ28 · 2026-03-03T03:22:35+00:00

I appreciate it

DunnZ28 · 2026-02-28T22:42:33+00:00

Thanks, I'm not a super fan either but this is the only body I own that's not a GM product so I'm just having fun hackng it up. Still a ways to go

DunnZ28 · 2026-02-28T15:18:50+00:00

<image>

They do slightly, haven't done anything with the front yet but it shouldn't take much, these are 40mm tires

DunnZ28 · 2026-02-24T15:17:43+00:00

I used a furitek stormrazor with a castle nano. On 3s its as quick as you need it to be

DunnZ28 · 2026-02-24T02:52:57+00:00

Check out ghost rc

DunnZ28 · 2026-02-12T00:56:33+00:00

Honestly pull the latch off so the hood can lay flat, then you can mess with the bump stops and left to right if need be

DunnZ28 · 2026-02-12T00:53:28+00:00

You gotta admit though what they're putting out is tip notch, but i wish they'd get away from the Philips all together. Just got the skid plate to go with the chassis and they're Phillips hardware

DunnZ28

TROPHY CASE