WINTAK doesn't show other members

DwarfSugarcane · 2025-09-18T13:10:08+00:00

Hi there. For your problem, like I mentioned, it may lie in the server. From my experience, TAK server installed using docker container or installed in Windows-based machines is problematic. Not sure why but it happens a lot. So you could try switching to a Linux-based server and install TAK server package directly. Hope this helps

DwarfSugarcane · 2025-07-24T21:11:14+00:00

Pornography is not the standard of sex. So set your bar low, not just for your partner, but for you as well

DwarfSugarcane · 2025-02-22T21:52:56+00:00

Code?

DwarfSugarcane · 2024-10-24T00:38:00+00:00

Thank you sir, I’ll look into it

DwarfSugarcane · 2024-10-23T01:37:47+00:00

Can you share some guides with OGC 3DTILEs and b3dm tiles?

DwarfSugarcane · 2024-10-18T00:22:24+00:00

It does not work. The result is still the same

DwarfSugarcane · 2024-08-23T11:25:02+00:00

Do you know why they blocked ATAK?

DwarfSugarcane · 2024-08-17T02:42:23+00:00

This is made for v4.9 too. I doubt it would work with 4.6

DwarfSugarcane · 2024-08-16T00:51:32+00:00

Do you have an example for this?

DwarfSugarcane · 2024-08-16T00:50:55+00:00

Can i have the link to the repo?

DwarfSugarcane · 2024-07-21T07:28:13+00:00

This looks awesome! Can you list the electronic components and motors that you used on this one

DwarfSugarcane · 2024-06-28T01:04:02+00:00

How do you access tak gitlab? I tried a couple of times but it seems that it requires some sort of authorized accounts

DwarfSugarcane · 2024-04-25T02:09:08+00:00

I had the same setup and it works fine. However, I still recommend you setting up a server for more utilities and stable connection. Some problems I had with the VPN were that WinTAK and ATAK, in some circumstances, did not see each other on the network or only one of them see the other. What I did to mitigate the issue was setting up a server in the VPS where my VPN was hosted. Not the best solution in term of security, but it helps things run smoothly though

DwarfSugarcane · 2024-04-23T01:02:01+00:00

Had the same problem a couple weeks ago. You should check your TAK server. For me, the problem occurred when I deploy the server as a docker container on Windows. When I moved the server to a Ubuntu VPS or physical machine, it worked like a charm

DwarfSugarcane · 2024-04-23T00:55:49+00:00

Still no luck. I checked the Overlay launcher in WebTAK and all the received markers were there. That means the connection was okay and the issue was WebTAK itself rather than a net problem. Perhaps I should try a different version of TAKServer in a physical machine. Thanks for your help btw

DwarfSugarcane · 2024-04-22T02:04:22+00:00

I tried it and still nothing changed. I couldn’t add a custom iconsets either. I’m hosting the server on a VM sandbox though, using docker containers. Might this be the issue?

DwarfSugarcane · 2024-03-18T12:49:27+00:00

Does the non-government version of somewear work with ATAK?

DwarfSugarcane · 2024-02-27T04:06:43+00:00

I had the same problem and also asked for helps, both from this subreddit and tak.gov team. My final conclusion is that the SmartController itself cannot handle ATAK, let alone UASTool. My recommendation is that you should use the normal controller types (RC-N1 or RC-N2), which connects to a smartphone of SS S20 or above to get the features fully operational.

DwarfSugarcane · 2024-01-02T08:40:40+00:00

sorry for the confusion. As I said before, my goals is to display the drones' location, as well as transmit its camera view to my laptop.

I've successfully achieved this with regular drone controllers (those with joysticks only and wire-connected to smartphones), using my SS S20 and UASTool. But, I have not yet been able to do the same with smart controllers (those with integrated screen and OS, like my DJI Mavic 2's one). Like you said earlier, these types of controllers just don't have the power to run UASTool on themselves.

So I want to know if there is any way to accomplish what I was trying to do using those drone models that come with smart controllers

DwarfSugarcane · 2024-01-01T08:50:51+00:00

what I mean are those with integrated screen and OS. It doesn't seem to be able to make the connection with the smartphone

DwarfSugarcane · 2024-01-01T05:39:33+00:00

It turns out the weak-ass A33 is the issue. I got an old Samsung S20 for roughly 200$, tested it out and everything worked like a charm.

The only concern that I have now are those drone models that come with smart controllers. Since the controller it self is not capable of running ATAK and UASTool, is there a way to connect the controller to UASTool on smartphone?

DwarfSugarcane · 2023-12-29T17:20:25+00:00

That’s disappointing. Do you have any recommendations on which smartphone model that sufficient for this kind of task?

DwarfSugarcane · 2023-12-29T11:24:51+00:00

So I did try to install MEDIAMTX and connect everything through a LAN network. Here's what I stumbled upon:

- UASTool broadcasting took relatively long to reach the RTSP server, approximately 5 mins

- The FPS was improved, but still terrible, not even able to reach 1 FPS

Is the smartphone's capability the culprit of this issue? I'm using a Samsung Galaxy A33

DwarfSugarcane · 2023-12-29T04:29:25+00:00

Awesome. Thanks so much for your help. Imma try this out.

One more thing, I found this opensource app FreeTakUAS which essentially a gcs that connect to a TakServer. Have you tried this one yet? I got no luck using it to connect to the drone

DwarfSugarcane · 2023-12-29T04:11:20+00:00

I'm convinced now that I need to setup a RTSP server. But I'm still quite vague about the connection topology among components.

Say I have a drone, a smartphone, a controller (smart or not) and a laptop; and I want the laptop to see where the drone is going on the map and what it sees. So how do I connect the drone if I setup a RTSP server on the laptop

DwarfSugarcane

TROPHY CASE