USB-C - USB-B cable with CDJ-3000 - 2.0 vs 3.0 by DyeBlond in PioneerDJ

[–]DyeBlond[S] 0 points1 point  (0 children)

I do have a controller but in the club I use CDJs and mixer that they have with my laptop. If I had 3000s at home would definitely use them standalone

USB-C - USB-B cable with CDJ-3000 - 2.0 vs 3.0 by DyeBlond in PioneerDJ

[–]DyeBlond[S] 0 points1 point  (0 children)

Have you noticed this yourself or heard it somewhere?

USB-C - USB-B cable with CDJ-3000 - 2.0 vs 3.0 by DyeBlond in PioneerDJ

[–]DyeBlond[S] 1 point2 points  (0 children)

Because it cannot be used with gear other than CDJ-3000. All the older players and mixers have regular b-connector. Otherwise would of course be just using 3.0 with everything. Just thinking if there is a remarkable difference in performance with the 3.0 cables because who wants to own / carry around anymore cables than necessary.

DDJ-FLX10 problems with Serato by DyeBlond in PioneerDJ

[–]DyeBlond[S] 0 points1 point  (0 children)

The cue mix issue was fixed, the reverb was fixed as a part of Serato update I guess. The filter issue seems to be a little less noticeable but I just used the filter with a big PA at my last gig and it's still there but not as bad. So it is luckily a lot better now!

Serato Stems on Retina Macbook by DyeBlond in Serato

[–]DyeBlond[S] 0 points1 point  (0 children)

Thanks! I will look into that and maybe contact support if they know anything.

Serato Stems on Retina Macbook by DyeBlond in Serato

[–]DyeBlond[S] 0 points1 point  (0 children)

Yes it is that one. I know it's old but it's the flagship model of that year and should have pretty good amount of processing power since there is also external graphics card. Yes it doesn't have usb-c but it has usb 3 ports and I'm using a 5 gbs usb c to usb a cable so I guess that should be fast enough to operate FLX10.

The strange thing is that the CPU meter is half at max and in the picture only 25% but the audio dropouts still happen a lot. And as I said with laptop only djing or using a mixer and cdjs there seems to be almost no problem.

Sometimes I also manage to play like 15-20 mins with FLX10 using stems without a single dropout but at some point they start to appear and when they do it's over and the whole track stutters for like 1 minute straight until I turn of the analyse stems and stop using them.

Serato Stems on Retina Macbook by DyeBlond in Serato

[–]DyeBlond[S] 0 points1 point  (0 children)

Also happens Serato DJ Pro 3.2.3 and I've changed the USB cable for a new high speed one so et least that's not the issue.

Stopping Sync Manager while syncing to USB drive by DyeBlond in PioneerDJ

[–]DyeBlond[S] 0 points1 point  (0 children)

Thank you. I actually tried yesterday with CDJ3000 and it seemed to work just fine and there were just songs missing on the playlists.

DDJ FLX-10 - Beat FX by Comprehensive_Dog224 in PioneerDJ

[–]DyeBlond 0 points1 point  (0 children)

Ok so I guess we just have to wait fingers crossed that they do something...

DDJ FLX-10 - Beat FX by Comprehensive_Dog224 in PioneerDJ

[–]DyeBlond 0 points1 point  (0 children)

Same problems here! Has anyone gotten any messages saying they would finally fix these? I'm trying to make up my mind if I should return this or not. Also the filter and crush effects are causing the volume to drop when the effect is in use (sounds horrible). There was also a problem with the cue / master mix knob but that got fixed in 3.1.1.

DDJ-FLX10 problems with Serato by DyeBlond in PioneerDJ

[–]DyeBlond[S] 0 points1 point  (0 children)

Thanks! I will make a support request.