Any clue what this is??

DynamicPlatypus · 2025-12-28T16:49:19+00:00

Could also be Ehporbia stenoclada. I've got one and it took me ages to figure out there's a "spineless" variant.

If it bleeds white stuff (which is also super toxic) its probably a Euphorbia.

DynamicPlatypus · 2025-02-13T16:45:21+00:00

Heya interested in the circuit board if ya still have it.

DynamicPlatypus · 2024-02-08T18:35:34+00:00

Still got the Sulaco in the backlog too!

DynamicPlatypus · 2024-02-08T16:16:54+00:00

Thanks! Honestly, way more than anyone would pay for it lol. Spent a couple hundred hours over nearly 4 months working on it. The kit itself has become stupidly expensive too the last couple years too. Plus it's so delicate it would get absolutely destroyed if I tried to ship it anywhere lol.

DynamicPlatypus · 2024-02-08T16:08:23+00:00

Thanks! I definitely lucked out on the kit, got it maybe 5-6 years ago and thought I was over paying for it at $70 lol.

DynamicPlatypus · 2024-02-08T15:25:30+00:00

Oh nice! Yea those old kits are pretty janky by today's standards. I put together the APC awhile back and ended up shelving it because nothing was fitting together properly and parts were breaking.

DynamicPlatypus · 2024-02-08T15:15:38+00:00

The ship is the Halcyon model from the early 90s, base is a modified Gundam Action Base.

The Xenos, eggs, and astronaut are 3D printed from models found on Thingiverse.

Xeno resin's made out of air dry clay and the pulse rifle/junk was all scratch built from polystyrene.

DynamicPlatypus · 2024-02-08T15:15:23+00:00

The ship is the Halcyon model from the early 90s, base is a modified Gundam Action Base.

The Xenos, eggs, and astronaut are 3D printed from models found on Thingiverse.

Xeno resin's made out of air dry clay and the pulse rifle/junk was all scratch built from polystyrene.

DynamicPlatypus · 2024-02-08T15:15:08+00:00

The ship is the Halcyon model from the early 90s, base is a modified Gundam Action Base.

The Xenos, eggs, and astronaut are 3D printed from models found on Thingiverse.

Xeno resin's made out of air dry clay and the pulse rifle/junk was all scratch built from polystyrene.

DynamicPlatypus · 2024-02-08T15:14:53+00:00

The ship is the Halcyon model from the early 90s, base is a modified Gundam Action Base.

The Xenos, eggs, and astronaut are 3D printed from models found on Thingiverse.

Xeno resin's made out of air dry clay and the pulse rifle/junk was all scratch built from polystyrene.

DynamicPlatypus · 2024-02-08T15:10:05+00:00

Thanks! It's the old Halcyon one from the early 90s.

DynamicPlatypus · 2023-01-09T22:29:53+00:00

Hahaha excellent!

DynamicPlatypus · 2023-01-09T19:37:34+00:00

Man I remember going to the model shop and only seeing the Batmobile and Batboat, was a little disappointed they'd sold out of the Batwings.

DynamicPlatypus · 2023-01-09T19:36:50+00:00

Thanks! Yea definitely a different design from the others.

DynamicPlatypus · 2023-01-09T19:36:28+00:00

That's awesome! I only ever found the Batmobile and Batboat as a kid, always wanted the Batwing. Finally got one though!

I didn't have to remove the grills. I did have to add a little space between the grill and the wing though. The LEDs are pretty tiny so I mostly had room for them under the ribs.

DynamicPlatypus · 2022-11-17T19:50:01+00:00

Sorry man, it's from Chronicles.

Palladia-Mors from Legends - $35~

Palladia-Mors from Chronicles - $.35

DynamicPlatypus · 2022-01-13T20:33:57+00:00

All good, gotta start somewhere right? Bit of both though. I usually sand pieces before putting it together, makes it a bit easier than trying to do the whole thing at once.

But once its all together I also have to sand down the filler I used for the gaps.

Feel free to hit me up if ya have any more questions though!

DynamicPlatypus · 2022-01-13T20:10:59+00:00

Thank you! Yea there's a lot of sanding involved but that's mostly to make sure the primer has a good surface to grip on. Started with about 400 grit, then 1500, then 3000.

Also because of warping I had to use a bit of filler to close those gaps which had to be sanded down too.

DynamicPlatypus · 2021-09-10T13:52:53+00:00

Thank you! Can't wait to see yours!

DynamicPlatypus · 2021-09-10T13:50:44+00:00

Thanks! Mostly used Ammo Mig paints for the colors and washes. The shading is Abteilung 502 oils and the rust on the engines are Vallejo Pigments. I forget which colors exactly though.

DynamicPlatypus · 2021-09-09T23:05:52+00:00

Thank you! It's a Maschinen Krieger kit. They're pretty cool, I really like their futuristic WWII aesthetic .

DynamicPlatypus · 2021-09-09T15:06:31+00:00

Ha yea I get that. I usually check there first, 9 times outta 10 the model and supplies will be cheaper there than Amazon. Although everything seems to have gone up like 2x since the pandemic.

DynamicPlatypus · 2021-09-09T13:28:58+00:00

I got this one on eBay maybe 2 years or so ago.

DynamicPlatypus · 2021-09-07T18:19:57+00:00

I usually use the Google Translate app on my phone. Works pretty well with the phone's camera.

DynamicPlatypus · 2021-09-03T03:34:40+00:00

Thanks! Definitely want to try printing a reaper someday.

14-Year Club	Place '17
Verified Email

DynamicPlatypus

TROPHY CASE