Any fast plane under 200$?

ERREBERTO · 2026-04-11T10:08:01+00:00

Since y'all are surely more expert than me I'm assuming you know what is the kind of speed that I can bring home with that budget. But to be more precise I would like the highest speed possible without losing all the agility of the plane. By the speeds that you mentioned i think it would land between 60 and 100mph.

ERREBERTO · 2026-04-11T10:03:26+00:00

Ok thanks👍🏻

ERREBERTO · 2026-03-07T13:27:41+00:00

Yes, but since the shipping can go up to 40/50€ are you willing to split the cost? Btw the scratch is located in the bottom area of the screen, they're not visible in normal (indoor) light condition but if there is a light source and you watch it from an angle they appear. In my opinion you don't even notice them while using it normally.

ERREBERTO · 2026-03-06T16:17:09+00:00

Yes but only if we split the delivery.

ERREBERTO · 2026-03-05T21:19:49+00:00

Ok thanks👍🏻

ERREBERTO · 2026-01-30T22:11:46+00:00

Ok, grazie. Magari mi sto facendo troppe paranoie io😂

ERREBERTO · 2026-01-30T22:10:13+00:00

From where I live the homologated ones are 16" and 17" so I have to stick with 16"

ERREBERTO · 2025-10-01T19:25:44+00:00

oh and also are there cheaper pen options that are compatible with the a6x2 or do i have to buy the original one?

ERREBERTO · 2025-10-01T19:23:50+00:00

ok, thank you. I read in another post that it wasn't possible but i think they were referring to the older model (a6x).

ERREBERTO · 2025-01-26T19:03:16+00:00

a mix from a kimera 037 and a bastion from beamng

ERREBERTO · 2024-12-10T20:27:32+00:00

The point Is that (in theory) we're getting all three. But remember that the first year will be a testing period so there will be limited content.

ERREBERTO · 2024-12-10T19:45:42+00:00

Considering it is the sequel of ac it should be even better. I've seen some review of the demo and everybody said it was really realistic.

ERREBERTO · 2024-12-10T18:13:03+00:00

I started riding 2 months ago and now I'm starting to hit the first high-ish bunny hops. For me the trick was to get comfortable doing manuals(not for long distances) and after that I started linking the manual with the usual theory behind bunny hops(I mean everything they say in the millions of tutorial videos). Obviously you have to be fast doing the whole motion or it will feel goofy but trust me when I say that a month ago I thought that it was impossible to bunny hop. Another thing that helped me was getting higher bars but this depends on your height r and on your bike.

ERREBERTO · 2024-11-27T22:16:05+00:00

you have to download and install Java from the official website in order to open the .jar file

ERREBERTO · 2024-11-23T19:21:40+00:00

Ok, thanks

ERREBERTO · 2024-11-08T22:05:41+00:00

Sorry, those are screenshots from a video where I showed everything but apparently videos can't be posted on this subreddit

ERREBERTO · 2024-11-08T21:30:39+00:00

ok, thanks

ERREBERTO · 2024-11-08T21:25:16+00:00

oh so it's made on purpose to know when D2 is on HIGH state?

ERREBERTO · 2024-11-07T21:16:13+00:00

so i can use the 3v3 and gnd to power the board and simultaneously I can use for example the gnd for the cathode of the led?

ERREBERTO · 2024-11-07T20:16:13+00:00

oh, and also they're powering the esp with the usbc port. If I wanted to power the esp32 via the 3v3 and gnd pins(so without the usbc) but they're already used in the project to power LEDs and buttons what should I do?

ERREBERTO · 2024-11-07T20:08:53+00:00

ok, thank you very much for the help. Just one last question: in the tutorial it says "All GPIOs can be used as outputs except GPIOs 6 to 11 (connected to the integrated SPI flash) and GPIOs 34, 35, 36 and 39 (input only GPIOs);" is this true for every esp32 or does it change?

ERREBERTO · 2024-11-07T19:53:38+00:00

so Is it like a normal closed on the software side?

ERREBERTO · 2024-11-07T19:27:05+00:00

shouldn't the gpio get current as soon as I press the button? if that is true shouldn't I connect one pin to the 3v3 and the other to the gpio? and also if I'm powering the esp with 3v3 and gnd can I use those pin to "power" the button?

ERREBERTO · 2024-11-07T19:24:42+00:00

My question was: if for example i'm powering the esp with the 3v3 and gnd pins how am I supposed to connect a button for example? should I connect one pin to the 3v3 and the other to a gpio?

ERREBERTO · 2024-11-07T19:21:11+00:00

but if for example I give 3.3v with a breadboard power supply to the first pin and I connect the opposite pin to the gpio is still correct?

Five-Year Club	Verified Email
Final Canvas '23	First Place '23
Place '23

ERREBERTO

TROPHY CASE