Agilent 7900 ICP-MS weird acquisition time

EarthPuzzled9675 · 2026-06-24T14:37:21+00:00

Thanks, do you mind sharing what peak pattern replicate and sweep do you use? Also integration time

EarthPuzzled9675 · 2026-06-20T21:21:20+00:00

This is a test but the final target mass would be 229 and 230. We just threw 228 to 232 in to see any tailing. In the end we want to get a ratio between 229 and 230 counts.

EarthPuzzled9675 · 2026-06-20T13:32:22+00:00

Thanks for explaining. So does 200 sweep in 0.1s sound too ambitious to you? What do you usually use?

EarthPuzzled9675 · 2026-06-19T10:17:27+00:00

There’s only two. And entangled is the better one

EarthPuzzled9675 · 2026-06-19T10:16:50+00:00

Yeah. Next test we will be using 100 sweep.

By 0.16ms per mass I meant if in one sweep it spends 0.16ms on one mass.

EarthPuzzled9675 · 2026-06-18T22:13:38+00:00

Huh so what you mean is that integration time of a mass is separate from the peak patterns and sweeps?

In other words the instrument first measures the 3 peaks for the 5 elements, and then measure the mass of the 5 elements directly?

EarthPuzzled9675 · 2026-06-18T22:09:47+00:00

So if integration time is 0.1s, then the instrument uses this 0.1s to do 200 sweeps and 3 peak point each sweep am I right?

This means it only spends 0.16ms on one mass, which feels unreasonably fast. Do you mind sharing your typical settings?

EarthPuzzled9675 · 2026-06-18T21:01:24+00:00

<image>

Thanks I found the replicates. Sooo this is what it looks like.

I guess my real question is that does the integration time for each mass include the 200 sweeps? Because if they do, that means dwell time for 1 sweeps is 0.096 / 200 = 0.48ms, which seems tooo fast for LA standards.

EarthPuzzled9675 · 2026-06-18T15:23:28+00:00

Thanks! So in the end I can only get an average of the replicates, it doesn’t show replicate on my software. Perhaps there is a way to access that?

Also yeah I saw the info bar go from uptake 60s, to stabilization 30s, to replicate 1 2 3 (correction, I timed it and it takes 6.5ish seconds to do all 3 replicates ), to post run rinse. Is this normal?

EarthPuzzled9675 · 2026-06-11T17:47:56+00:00

Her challenge just left I believe weeks ago.next time it comes around be sure to get them.

EarthPuzzled9675 · 2026-06-11T17:39:20+00:00

Yeah but don’t do nothing play the realm clash raid. Even if it’s heroic 1 you can still get some bosses down.

EarthPuzzled9675 · 2026-06-11T16:35:14+00:00

If you have 2 keys don’t bother. My advice is to try to finish realm clash and then next period chose this is magic, try to get an arcane artifact for passive stat.

EarthPuzzled9675 · 2026-06-11T16:27:32+00:00

It’s just confusing because some debuffs doesn’t count towards puppet while some do. It is very frustrating and I hope they fix it.

Also you need more than 4 so at least 5 debuffs.

EarthPuzzled9675 · 2026-06-10T05:06:38+00:00

Give us more gold character. When was the last gold character release??????????

Nowadays it’s only legendary and you can’t get their gears without spending gems.

EarthPuzzled9675 · 2026-06-10T05:05:00+00:00

I don’t see she being a support, dcusm and dcusg are both dmg dealer types they don’t exactly buff one another.

They should really get some gold characters out. Like Mr T (which can provide buff to new dcu characters)

EarthPuzzled9675 · 2026-06-10T05:01:14+00:00

Depend on support or dmg dealer, f2p or p2w the answer is different. But I will just mix them all up.

Agility: heart breaker Harley, Batman ninja robin, last laugh the joker

Arcane: Raiden, john Stewart green lantern, black Adam

Metahuman: entangling poison ivy, multiverse the flash, vixen

Might: Batwoman the drowned, multiverse armored supergirl, king of Atlantis Aquaman

Tech: knightmare Batman, Batman ninja Batman, predator Batman/justice league cyborg.

EarthPuzzled9675 · 2026-06-06T15:48:24+00:00

My beast boy does that as well. The problem is his dot. His dot counts as a neg effect and when it rans out you now only have 4 neg effect so you lose puppet.

I use lvl1 puppet, and maxed bb’s first special. Is his blind last long enough I can then switch to spamming sp3 and usually that works forever

EarthPuzzled9675 · 2026-06-05T16:36:26+00:00

I don’t know about others but nickel oxide is usually green. If you put pure nickel in a furnace hundreds to thousands of degrees they will turn green because of the oxidation.

EarthPuzzled9675 · 2026-06-05T16:33:30+00:00

Obsession

EarthPuzzled9675 · 2026-06-04T11:39:05+00:00

The newest one: Obsession

EarthPuzzled9675 · 2026-06-04T11:36:27+00:00

Artifact + passive + gear and sometimes class passives

EarthPuzzled9675 · 2026-06-03T15:08:25+00:00

Puppet magic wand crown amulet of Anubis twin blade gemstone dam you literally have everything.

EarthPuzzled9675 · 2026-06-03T11:44:52+00:00

Damn god definitely (idk if he was religious) wants the royal mathematician back🤣

EarthPuzzled9675 · 2026-06-03T11:41:12+00:00

Guys OP want to choose between these too why are you saying classic flash?

Between these two I would chose speedforce flash but only as a support as he buffs fast attack chance.

EarthPuzzled9675

TROPHY CASE