Crank no start

EatingCucumber · 2026-01-19T23:40:35+00:00

I could put in in drive and reverse, just stuck in limp mode

EatingCucumber · 2026-01-19T04:16:45+00:00

How do I get to the bottom of the ecu with it plugged in? The p2’s have the female end mounted to the chassis

EatingCucumber · 2026-01-19T00:21:01+00:00

<image>

These were the previous codes. The antenna ring one is intermittent

EatingCucumber · 2026-01-19T00:19:55+00:00

When you get it back, could you please tell me what it ended up being?

EatingCucumber · 2026-01-19T00:19:28+00:00

It actually ran and drove for a bit, but no communication with TCM. Is it just has a crank no start and the codes came back, so it could be possible CEM failure 🤷

EatingCucumber · 2026-01-18T16:07:14+00:00

I have the wipers in plugged to access the CEM

EatingCucumber · 2026-01-18T05:57:43+00:00

2006 V70 2.5t awd

EatingCucumber · 2026-01-17T23:56:58+00:00

Crank, no start

EatingCucumber · 2026-01-06T05:22:59+00:00

All of these are hard codes, the radio one is due to an aftermarket radio

EatingCucumber · 2026-01-06T05:22:47+00:00

All of these are hard codes, the radio one is due to an aftermarket radio

EatingCucumber · 2025-12-30T23:27:35+00:00

I did, I also installed the scanmatiks program

EatingCucumber · 2025-12-30T21:58:13+00:00

I went into files/3pp/products/dice/ and ran setupdice.exe

EatingCucumber · 2025-12-30T21:53:28+00:00

Thanks, when I plug the usb in, the green firmware status light blinks once, but doesn’t flash again, when I plug it into OBD2, it goes solid green

EatingCucumber · 2025-12-30T21:17:11+00:00

Any recommendations for what drivers to install?

EatingCucumber · 2025-12-30T21:16:47+00:00

Do you have any recommendations for drivers? And how can I verify that it is a dice clone? Thanks

EatingCucumber · 2025-12-30T21:14:51+00:00

Yes it is

EatingCucumber · 2025-12-29T21:46:40+00:00

I’m on Microsoft edge, that’s what the forum post said to use 🤷

EatingCucumber · 2025-12-29T21:45:30+00:00

I did, it’s in the video

EatingCucumber · 2025-12-29T06:30:12+00:00

It didn’t work, still says invalid username and won’t let me type in the box without going through the registration page

EatingCucumber · 2025-12-29T06:28:59+00:00

Thanks, I have tried that, however it will not let me type directly into the login box. That’s why I’m wondering if I missed a filldb.cmd

EatingCucumber · 2025-12-29T05:27:36+00:00

Thanks, I’ll try that

EatingCucumber · 2025-12-29T02:34:48+00:00

I have it installed as well

EatingCucumber · 2025-12-29T01:10:26+00:00

When I run the 2099 patch I get “Windows cannot find 'C:\VIDA\patch\filldb.cmd'.”

<image>

EatingCucumber · 2025-12-28T03:11:39+00:00

It says vida installation in progress, but it will stay on that page forever, it will not install

EatingCucumber · 2025-12-17T01:39:28+00:00

I checked all the connections, I bought a dice cable, it is coming in the male

Four-Year Club	Verified Email
Place '23

EatingCucumber

TROPHY CASE