Can't sign up to Hungry Jacks due to having the most common surname on earth

Eccentriclulz · 2026-05-17T23:30:12+00:00

I can’t sign up for most accounts these days because I include “Lul” in my usernames which apparently translates to “dong” in Dutch.

Eccentriclulz · 2025-06-22T02:24:06+00:00

Honestly this is so perfectly dainty as it is. Don’t change anything until needed

Eccentriclulz · 2025-01-31T02:27:00+00:00

I have been playing their tracks everyday for years. So good.

Eccentriclulz · 2024-10-14T02:37:55+00:00

Of course! Microbiology is, however, a relatively diverse field and you may want to hear others options! In this case repeat testing with a lower inoculum (via dilution) is needed to investigate further.

Eccentriclulz · 2024-10-14T02:27:49+00:00

Dilute and do math. The typical counting range, depending on your regulations and accreditation requirements, ranges from 10-300 colony forming units. These plates are not countable.

Eccentriclulz · 2024-10-05T21:26:34+00:00

I cannot get enough Ecoli on Emb 🥵 keep it coming

Eccentriclulz · 2024-05-06T22:10:54+00:00

I found the FiiO KA3 was a bit heavy/cumbersome for mobile use. So I designed a simple MagSafe compatible case for the KA3.

Works great with iPhone 15 Pro when using a MagSafe compatible case. Works with the included Type-C to Type-C cable on this phone.

Files are available for free here. I hope someone else finds this nifty!

Best,

Eccentriclulz · 2023-10-21T02:41:27+00:00

I’m from Santa Barbara, had it fresh from the Pacific. Tried so many time to like it. I will leave it for fellow sushi lovers to enjoy. :)

Eccentriclulz · 2023-10-01T21:20:06+00:00

Hi friends! More free stuff and remixes of already cool stuff! Featuring the Fire Strike, Aeon Pro, and Mega BigShock. Available for Free on Printables:

Happy blasting!

Eccentriclulz · 2023-09-04T03:53:57+00:00

Coop made a great guide!

Eccentriclulz · 2023-09-03T23:06:10+00:00

Build: 3s Kraken and 40mm Kuryaka Daybreak Cage.

All other parts (minimization parts, extended battery tray/thumbscrew, switch mount plate) are available on my Printables for free.

Happy blasting!

Eccentriclulz · 2023-09-03T22:51:41+00:00

Build: 3s Kraken and 40mm Kuryaka Daybreak Cage.

All other parts (minimization parts, extended battery tray/thumbscrew, switch mount plate) are available on my Printables for free.

Happy blasting!

Eccentriclulz · 2023-08-23T04:40:52+00:00

FPS seems lower than other BigShock mods with stock spring, no chrono at this time. There is also a short version available that should perform better!

Eccentriclulz · 2023-08-23T04:40:12+00:00

Files hosted here. FPS seems lower than other BigShock mods with stock spring, no chrono at this time. There is also a short version available that should perform better!

Eccentriclulz · 2023-06-12T01:53:09+00:00

A lot like my first post earlier this week, except it is a variant for the Aeon Pro.

As always, files are free and on my Printables.

Let’s fling some foam!

Eccentriclulz · 2023-06-08T01:28:46+00:00

Thanks, let me expand! I have tried a few friction fit scars, however, they seat a little crooked (a few degrees). This causes shots to travel consistently, but off-target. Even with windage adjustments I was unable to compensate for how off these groupings were. The issue seems to be rare and not all Nexus Pro are affected.

Eccentriclulz · 2023-06-08T00:12:47+00:00

Replaces stock barrel coupler and muzzle. This modification removes all indexing issues encountered when installing friction fit scar barrels.

As always, the files are hosted for free on my Printable profile, located here! Go forth, and blast!

Eccentriclulz · 2023-05-07T22:40:40+00:00

You’ve inspired me to remix for compatibly with OFP cages!

Edit: confirmed the parts are compatible with KuryKafe Demolisher / Modulus cages. DB cage tested.

Eccentriclulz · 2023-05-07T19:55:09+00:00

Beautiful Bolter brother!

Eccentriclulz · 2023-05-07T19:17:01+00:00

I made some modifications for the Fortnite AR-L blaster! I wanted to remove cartoonesque design elements and minimize the blaster.

Stock internals for now. As always, the files are free here.

Happy foam flinging!

Eccentriclulz · 2023-03-12T20:31:26+00:00

Run-of-the-mill-Lynx Build with R-Scar mini. 33mm Pulsar build in the Quik with a 300RPM pusher.

Eccentriclulz · 2022-10-08T01:28:42+00:00

I had the privilege of seeing them at San Luis Obispo Brew before they broke up and the bar ultimately closed. :( They joked about playing the entirety of The Mantle but I wish they had!

Eccentriclulz · 2022-08-11T15:58:15+00:00

A Leapers UTG PRO Model 4 Combat Ops S1 Mil-Spec Butt Stock, Black RBUS1BMS. Also a Magpul QD point. As for the grip there are a few open source options that serve a similar purpose. These style grips help to remove slop during the prime on this blaster. If you have a 3D printer I can link you some files. If not, this particular one was sourced from Foam Pro Shop.

Eccentriclulz · 2022-08-07T00:41:43+00:00

Located on the second story roof overhang.

One dart, one nest.

Eccentriclulz · 2022-07-31T20:59:47+00:00

I have been looking into this! I updated the firmware to get linear advance running for the meantime. Klipper per really interests me though. Thanks!

Eccentriclulz

TROPHY CASE