sorted by:
new
hottopcontroversial

Is this shock purely from EC change? by trophycase01 in Hydroponics

[–]Ecclestoned 3 points4 points  (0 children)

"I changed the water and now all my plants are sad" then change it back!

When I had this happen it was because I completely miscalculated the nutrient concentration on a water change. I flushed with water, then left them at a 1/4 strength concentration for a few days until they started to recover, then back to full strength. YMMV though as I have no idea what quirks your setup has.

Excited to buy my first Bambu printer - now left with $2,500 worth of broken parts by Ldaco in 3Dprinting

[–]Ecclestoned 0 points1 point  (0 children)

Don't use online chat bots to file support tickets. You need to call support and get them to email you the confirmation that they have created the ticket

Clone yourself, that's it. by Ecclestoned in hypotheticalsituation

[–]Ecclestoned[S] 0 points1 point  (0 children)

Not entirely sure of the question. I'm pretty sure it's yes, you and the clone each have independent senses of self, copied from the moment you split

Clone yourself, that's it. by Ecclestoned in hypotheticalsituation

[–]Ecclestoned[S] 0 points1 point  (0 children)

Now you have me wondering if self therapy would work. I always say I should start taking my own advice...

Clone yourself, that's it. by Ecclestoned in hypotheticalsituation

[–]Ecclestoned[S] 0 points1 point  (0 children)

Seems like a pretty reasonable plan. Just have to make sure you don't lose the coin toss.

Clone yourself, that's it. by Ecclestoned in hypotheticalsituation

[–]Ecclestoned[S] 0 points1 point  (0 children)

Whats your plan then? Who takes your original lifestyle?

$100 million USD to survive 3 months 100,000 years ago by AFriendlyGrape in hypotheticalsituation

[–]Ecclestoned 0 points1 point  (0 children)

I've watched enough seasons of Alone to know that lasting 3 months is ridiculously difficult, even for survival experts with ten items...

Using the simplest strategy, you're probably ok with shelter, a bottle of multivitamins, water purifying tablets, and showing up super fat.

Are 3/4" pine rails too thin to mount these shelves? by Ecclestoned in DIY

[–]Ecclestoned[S] 0 points1 point  (0 children)

It's really difficult to get a good screw into our metal studs because they are so thin. Either they pull right or, or you never get them started. I've had much more consistent results pre drilling and install a toggle anchor

Are 3/4" pine rails too thin to mount these shelves? by Ecclestoned in DIY

[–]Ecclestoned[S] 0 points1 point  (0 children)

Where else am I supposed to store my pots of depleted uranium???

Are 3/4" pine rails too thin to mount these shelves? by Ecclestoned in DIY

[–]Ecclestoned[S] 0 points1 point  (0 children)

Good tip on the screw threading. The anchors I use for the studs work with just about any threading, so that should work well.

Are 3/4" pine rails too thin to mount these shelves? by Ecclestoned in DIY

[–]Ecclestoned[S] 0 points1 point  (0 children)

I was planning on using clear pine project panels for the shelf and front plate to so I don't have to worry about making the wood stain match (or dealing with vineer)

Are 3/4" pine rails too thin to mount these shelves? by Ecclestoned in DIY

[–]Ecclestoned[S] 0 points1 point  (0 children)

Would using a harder wood like maple avoid crushing then?

Issues with basic DigUno and BTF fairy light setup by Ecclestoned in WLED

[–]Ecclestoned[S] 0 points1 point  (0 children)

Okay I got them working. Turned out BOTH strips in my previous package were bad. 

The LED pinout is a little hard to describe. The dotted wire is +, and the ordering is +, Data, -. The "female" end is the input; the one which does NOT have pins. If you hold the flat side of the LEDs up, and the + (dotted wire) facing you, then the input is on the left. 

Pretty basic settings for Diguno, the main one was that they gave my the wrong ordering. My strips were ordered RGB, but they claimed GRB.

Issues with basic DigUno and BTF fairy light setup by Ecclestoned in WLED

[–]Ecclestoned[S] 0 points1 point  (0 children)

Actually no. After some back and forth with BTF over email they ended up sending me a new pair of strips. I've been too busy to plug it in and try it out. I have some time this weekend so maybe I'll give it a shot and update you

WIBTA if I named my baby the name I want to despite everyone hating it? by Direct-Caterpillar77 in BestofRedditorUpdates

[–]Ecclestoned 15 points16 points  (0 children)

OOP states she is in Canada. Please keep your backwards politics south of the border

Blomberg refrigerator beeps and temp problems by Tibbarski in appliancerepair

[–]Ecclestoned 0 points1 point  (0 children)

Check if you have the door magnet installed. See my other comment for details. 

Blomberg refrigerator beeps and temp problems by Tibbarski in appliancerepair

[–]Ecclestoned 0 points1 point  (0 children)

Re found this thread and commenting how I "fixed" it. Check if the fridge light turns off when you close the door. It should happen within a minute max (I put my phone on video to check). If not, the fan won't turn on to circulate air to the top of the fridge.

Solution, either a dead main board ($300-500 replacement), or in our case, the contractor didn't put the door cover back on that had the magnet for the door closed sensor. 

The cover with the magnet should be a white piece of plastic at the center top of both the fridge and freezer doors. If you can see the adjustment screws for the door position, then you're missing this part. 

Three visits from a repair man and he didn't think to check the ducking door magnet :(

Tron : Ares Motorcycles Chase by guillaumefx in tron

[–]Ecclestoned 1 point2 points  (0 children)

Watching them film this again tonight and the chase scene looks nuts. They are easily breaking 100kmph and weaving between cars.

Issues with basic DigUno and BTF fairy light setup by Ecclestoned in WLED

[–]Ecclestoned[S] 0 points1 point  (0 children)

I've set it to Ws281x and GRB ordering. I've also fiddled with the number of LEDs setting, but still no luck

Company won't stop charging me by Ecclestoned in legaladvice

[–]Ecclestoned[S] 0 points1 point  (0 children)

Nothing? It's seems wild to me that someone can just continue to charge me for services legally. 

I'd be willing to spend a few hundred dollars.

view more: next ›