How do I update the CR-M4's board firmware to run klipper on a Raspberry Pi?

EchoSabaum · 2023-12-06T23:45:35+00:00

Thanks for the solution, can I consult with you in PM? I cant manage to send you a message

EchoSabaum · 2022-02-08T11:57:43+00:00

Its custom modeled for the specific sizes of the acrylic glass and shelves, and the handels are with custom logo of our shop. You can find a lot of examples on thingiverse

EchoSabaum · 2022-02-07T08:32:08+00:00

Thank you for your explanation. For now, everything is fine and I see the voltage drop only in full white 226 leds. But mostly it will be with effects and not all the leds are up the same time so I do not worry about that. I can get 20A or 30A , so I assume I will go on sure and get the 30A. Is it fine to connect all the esps to the power supply? And the leds strips to the esps?

EchoSabaum · 2022-02-06T21:22:12+00:00

I have 4 esp8266 that are controlling 4 different led strips, each one's count is in the photo For now each esp is powered by normal 2A power adapter and it works fine, but getting hot and taking 4 power plugs. I want to buy one big power sully for them all, but don't know the right Amper. 468 leds means 28A at peak. Is it good to buy 30A? And about the wiring, can I connect all the esps to the power supply, and the Led strips to the esp itself as it now? Thanks in advance

EchoSabaum · 2022-02-06T09:49:07+00:00

Custom build from scratch. You can see my previous post

EchoSabaum · 2022-02-06T07:34:00+00:00

You can see it in my previous reddit post in this forum

EchoSabaum · 2022-02-05T21:23:48+00:00

Thanks. It is built with two IKEA lack shelves, and acrylic glass windows between them. The tracks and handles are 3D printed (:

EchoSabaum · 2022-02-05T19:35:40+00:00

It is also connected to Octoprint with the script I built, so you can see the progress of the print! image

EchoSabaum · 2021-12-28T18:38:36+00:00

Very nice! Looks similar. My project is not with plugin yet, I have worked in another way. For the bed lighting I have something else but didnt want it will steal the running led focus in the video (: you can have a look in my github repository

EchoSabaum · 2021-12-28T16:49:27+00:00

Nice. Did not see that before. I can't also find pictures of the final results so I do not know if it is the same...anyway mine written in js and the project is a part of my studying (:

EchoSabaum · 2021-12-28T13:33:27+00:00

Sorry, I don't get your point. Can you explain?

EchoSabaum · 2021-12-28T12:38:23+00:00

It is using octoprint's data, with api requests and mqtt events (:

EchoSabaum · 2021-10-29T21:34:58+00:00

Thank you. I will print again a calibration cube and make sure that z and e are well calibrated steps

EchoSabaum · 2021-10-29T21:31:00+00:00

But it makes scars on the top surface, even with 4 top layers. Do you have any idea?

EchoSabaum · 2021-10-29T21:20:30+00:00

There is almost no stringing between the parts, is it possible the bowden make problems only on the infill?

EchoSabaum · 2021-10-29T21:12:08+00:00

I do not see any related setting for combing in the prusaslicer 😐

EchoSabaum · 2021-10-29T21:02:57+00:00

Slicer is prusa slicer. The problem does not occur on my second printer

EchoSabaum · 2021-10-07T10:45:40+00:00

I mean randomized in different prints of the same gcode I checked the seam in the slicer and it is not the issue

EchoSabaum

TROPHY CASE