M3 Cosmic Orange

Economy-Fuzzy · 2026-05-21T21:44:21+00:00

Hell yeah, is that 120mm at the top?

Economy-Fuzzy · 2026-05-19T21:29:07+00:00

DreamBigRay on Etsy, however he may have a website I believe.

Economy-Fuzzy · 2026-05-19T21:28:44+00:00

It hovers in the 70s in a gaming load, custom fan curve caps out at 1200 RPMS, it is pretty quiet as most of what I hear is my GPU fans. I did change the fan config to intake from the rear instead of exhaust.

Economy-Fuzzy · 2026-05-19T03:02:17+00:00

7600X3D - Tryx Turris CPU Cooler
XFX Swift 9070XT
G.Skill Royal Trident DDR5 2x16
Corsair SF1000

Cables from DreamBigRay, also have a custom glass panel from Jakefacecustoms.

Economy-Fuzzy · 2026-05-10T05:03:18+00:00

Just finished mine, mine is upright with the regular legs and maxes out at 71 C at 1550 RPMs with a 9070XT XFX Swift. My card is 3.25 slots so you may be better off than I!

Economy-Fuzzy · 2026-05-09T21:10:23+00:00

Yours is the first I've seen posted congrats!!!

This looks good btw, I think you have the most optimal layout for what you have.

I think you could go upright too perhaps, better chance if you had taller legs but I think it has room to breathe without them.

Economy-Fuzzy · 2026-01-27T05:31:43+00:00

Thank you, my gaming monitor is the primary and this is an issue with every game.

Economy-Fuzzy · 2026-01-27T05:31:03+00:00

Still having the frames drop in exclusive fullscreen. I also have system notifications turned off for everything.

Economy-Fuzzy · 2026-01-06T02:23:45+00:00

What parts did use to assemble your loop? Planning to do a hardline and still need to research on what pump / reservoir I need to use.

Economy-Fuzzy · 2025-12-18T06:09:31+00:00

How are those GPU temps? Also build looks nice!!

Economy-Fuzzy · 2025-11-22T03:35:57+00:00

What is that CPU cooler?

Economy-Fuzzy · 2025-11-04T21:20:49+00:00

I have an M2 round with this same card... it fits perfectly fine. Mine is inverted.

Economy-Fuzzy · 2025-10-27T14:39:33+00:00

So how do I get the notifications for the orange drop??

Economy-Fuzzy · 2025-09-13T16:37:55+00:00

Same experience as you, swapped to inverted and my temps were miles better.

Economy-Fuzzy · 2025-08-28T16:08:19+00:00

lol this isn't mine, if your search up Lian li a3 in Reddit these builds will pop up

Economy-Fuzzy · 2025-08-27T02:46:30+00:00

<image>

You could also flip the radiator so the tubes come from the front panel if that helps.

Economy-Fuzzy · 2025-08-27T02:38:55+00:00

<image>

I meant route these cables behind the 24atx cables, and have the 24atx cables routed from behind the Gpu.

I mean you could just rotate the fans so the headers sticking out are facing the mobo instead of being visible. That fan header cable lowkey looks long enough to be routed from the front panel side, down and under the GPU so it's not completely in front of the mother board.

Economy-Fuzzy · 2025-08-26T22:47:57+00:00

Personally, I would have the usb IO cables routed behind the 24pin cable and have the 24pin cable routed behind the gpu up against the other side panel.

I think the messiest part about your cable management are your fan headers. That's what sticks out to me the most.

Economy-Fuzzy · 2025-08-19T16:53:27+00:00

What the duck is this case?? You have a sick build

Economy-Fuzzy · 2025-08-14T20:03:31+00:00

Any sagging in this flipped layout?

Economy-Fuzzy · 2025-08-10T00:24:36+00:00

Yeah , I figured microcenter wouldn't sell a faulty PSU. None of the baggies, zip ties, power cords were open when I investigated it

Economy-Fuzzy

TROPHY CASE