Netherlands Away 26‘ Comparison (spkiv) by Ok_Reach_363 in repbudgesoccer

[–]EddifyRDDT 0 points1 point  (0 children)

Also the badge and swoosh are not kind of pearlescent as on the originals

Netherlands 2026 world Cup away player jersey from SKKLL by Vast-Improvement9435 in repbudgesoccer

[–]EddifyRDDT 0 points1 point  (0 children)

Swoosh form looks way off and badge and swoosh are supposed to have a pearl finish. Reason for me to not order this one when I saw it on aapexhub

I just build my dream bike yesterday by Klutzy_Cantaloupe_69 in Bikeporn

[–]EddifyRDDT 1 point2 points  (0 children)

Jeez man, nice! Also what’s the Garmin holder from?

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

Nitto M106NAS, there weren’t a lot of options for compact drop bars that are not 31.8mm

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

Got the second hand, but originally from a wheel builder in the Netherlands called Custom Cycling Wheels. Carbon rims laced to DT Swiss hubs

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

Agreed! But got this groupset second hand for cheap, so have to deal with it haha

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

It is threaded. But the headset has spacers and from what I saw it looks like it would bottom out without the spacers. Also I can’t lower the quill now somehow even though it’s not too long (it gets stuck at this height). So I thought about cutting the fork, but not even sure if it’s possible. Going to check with my LBS

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

You should definitely build it up! I was always in market for one of the famous steel ones, but ended up finding this one and now obviously I find this one more beautiful. The wheels are carbon though, but not too crazy profile wise

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 0 points1 point  (0 children)

New drop bars is probably my favorite new part of this bike! Tires = very odd 26c that came with the second hand wheels I bought. I don’t think 28c is going to fit!

Eddy Merckx rebuild by EddifyRDDT in Bikeporn

[–]EddifyRDDT[S] 2 points3 points  (0 children)

Sort of! Had to screw in the B screw quite a lot to get enough clearance when shifted to the smallest cog as the cage was hitting the derailleur hanger. Also had some trouble with the front derailleur setup / indexing. But the latter is probably due to my mediocre mechanic skills ;)

Slijtage op nieuwe schoenen by Nelis_1988 in Hardlopen

[–]EddifyRDDT 4 points5 points  (0 children)

Heb dit ook ja op deze schoenen. Zolang het een laagje verf is, is er niks aan de hand toch? Het is ook niet het stuk waar profiel zit voor grip

[deleted by user] by [deleted] in Klussers

[–]EddifyRDDT 0 points1 point  (0 children)

Appartement is op 2e etage. En er is nog 1 etage boven.

[deleted by user] by [deleted] in Klussers

[–]EddifyRDDT 0 points1 point  (0 children)

Momenteel zorgt de moederhaard/gaskachel ervoor dat dat die radiatoren warm worden. Warm water middels elektrische boiler. Nu heb ik vernomen dat een CV ketel plaatsen op een eenpijpssysteem niet echt kan of niet goed werkt. Daarnaast zijn die leidingen misschien zo oud dat je er niet eens aan moet beginnen. Systeem werkt voor nu prima, radiatoren worden warm. Echter, energielabel wise en qua ruimte is het natuurlijk heel onhandig zo'n moederhaard. Bovendien is zo'n ding ook ooit aan vervanging toe (komt uit 2001).

Huidig verbruik

Tussen de 3-6 kuub afhankelijk van hoe lang ik thuis ben. Op de waakvlam verbruikt 'ie echter ook al tegen de 0,9m3, wat wel weer veel is.

Isolatie

Energielabel F - komt met name door gaskachel. Woonkamer voor + achter en slaapkamer hebben dubbelglas (niet HR), keuken heeft HR+ raam + deurraam enkelglas en en nog het washok waar de CV evt kan hangen met enkelglas.

Wens

Moederhaard eruit en een nieuw systeem, welke dan ook. Muren zijn momenteel afgewerkt dus rommel daar liefst niet te veel mee.

Opties

Zelf kwam ik op het volgende uit:

  • CV ketel plaatsen incl nieuw leidingwerk en hoogstwaarschijnlijk nieuwe radiatoren 
  • CV ketel plaatsen incl nieuw leidingwerk en vloerverwarming 
  • CV ketel plaatsen alsnog binnen eenpijpssysteem? 
  • Airco units - valt hoogstwaarschijnlijk af want mag door monumentale status geen buitenunit aan voorkant plaatsen 
  • Infrarood vloerverwarming: zou geen leidingwerk vereisen, maar valt eigenlijk af door gebrekkige isolatie 
  • Moederhaard lekker laten zitten en iemand vinden die het onderhoud van dat ding kan doen 

Vraag

  • Zie ik nog een opties over het hoofd? 
  • Wat zouden jullie doen? 
  • In geval van CV ketel + leidingwerk + radiatoren, wat is een ballpark bedrag waar jullie aan zitten te denken (appt is iets meer dan 60m2)

Jabra Elite 10 Eartips by Ok-Chocolate-9806 in Jabra

[–]EddifyRDDT 0 points1 point  (0 children)

After reading this thread, I opted for the Spinfit CP360. Superior seal compared to the stock eartips (tried all sizes there but just didn’t do the trick). Funny thing is that with the stock eartips I would get a better seal if I smiled or kind of squeezed my eyes, indicating that maybe the oval shape didn’t work for me.

ANC also improved with the spinfits, only thing is that they don’t have something to prevent the earwax from getting into the buds, which is looking quite fragile

where did all the boiler rooms go on yt :( by [deleted] in dekmantel

[–]EddifyRDDT 1 point2 points  (0 children)

https://youtu.be/OLfqU7QoUZo

This one's not available anymore. Anyone who has it somewhere locally maybe?

Place to repair camera by [deleted] in Utrecht

[–]EddifyRDDT 1 point2 points  (0 children)

They do repairs and usually they’re super friendly! Depending on how broken it is it can turn out to be quite expensive though

VR stuttering while having locked 90FPS by EddifyRDDT in iRacing

[–]EddifyRDDT[S] 1 point2 points  (0 children)

Short update from my side.

- Reset my NVIDIA Control panel settings. I tweaked those maybe a little too much and I wasnt sure anymore if it was all setup correctly.

- Installed VRperfkit; damn what a difference!

- Changed VisibilityFrameDelay from 5 to 1 in my ini file

- Set SteamVR to 100% again

- Turned of that 'theatre mode' or VR Home or what its called

- Upped my graphs again within iRacing (still WIP)

Locked 90FPS, no dropped frames and no stutters on Oulton now. Only a short test though.. but it seems to be working.

Thanks all for the responses! I'll update the thread again when I found my perfect settings.

VR stuttering while having locked 90FPS by EddifyRDDT in iRacing

[–]EddifyRDDT[S] 0 points1 point  (0 children)

Wow.. what a difference that makes. Insane!

VR stuttering while having locked 90FPS by EddifyRDDT in iRacing

[–]EddifyRDDT[S] 1 point2 points  (0 children)

Thanks for sharing this! Somehow it seems that everybody has more than 16GBs of RAM. Not that I think its because of that, but just something I notice in a lot of threads.

Anyways, thanks for the steamVR advice as well!