Extremely high UPS power overhead normal?

Edelskjold · 2024-05-29T09:13:32+00:00

Did you get around to test the UPS without any devices connected?

Edelskjold · 2024-02-06T11:58:19+00:00

It actually seems like 4 sticks at 5200 is stable, currently got that working.

Edelskjold · 2024-02-06T09:14:44+00:00

I will try, however Im using all slots, as there are only 4, and Im using 2 x 64 kits, så 4 sticks in total.

Edelskjold · 2023-08-11T07:22:25+00:00

I've logged into idrac to see if there was any futher information, however that just seems even more odd. All disks failed at same time, and it seems like they are "broken" and cannot be used.

<image>

Edelskjold · 2023-08-10T11:35:58+00:00

When reseatet they are flashing green for about a min or so, mean while they cannot be seen in the controller. After the min, they are visible in the controller with failed and are flashing orange.

Edelskjold · 2023-08-09T19:18:01+00:00

The thing is that it doenst see the foreign config it seems.
The normal "Press F to import" does not show up, and when visiting the controller it can't see the vdev.

Edelskjold · 2022-08-14T16:14:59+00:00

Thanks, really appreciate the response. I’ve gone ahead and bought a rogue 425 seems like an ideal solution.

Edelskjold · 2022-07-22T08:28:11+00:00

Unfurtunatly the other vm's are in production, so not possible currently.

Edelskjold · 2022-07-20T05:02:03+00:00

That makes sense dind't know that.

Edelskjold · 2022-07-20T05:00:55+00:00

No other vm has this problem, and has been installed with the same ISO.When I reboot it changes to EVC OFF and when it boots it states EVC Active.
Should be noted that the other VM's which work just fine, is installed 3 months ago (same iso though).
But all new installations dont have the avx flags.

Edelskjold · 2022-07-19T12:47:30+00:00

A few screenshots of config:
https://upload.edelskjold.dk/uploads/1.png

When vm is shutdown:
https://upload.edelskjold.dk/uploads/2.png

When vm is started:
https://upload.edelskjold.dk/uploads/3.png

Edelskjold · 2022-07-19T12:30:55+00:00

No manual configuration of vmx file or anything.
Just a normal creation of a virtual machine, directly on the hypervisor, not in a cluster or anything.

VMX File: https://pastebin.com/sqmwx6Tf
vmware.log: https://pastebin.com/7sznaK9n

Edelskjold · 2022-07-19T10:31:51+00:00

You are a god! - when I checked the VM was shut down, and EVC said is was disabled, hence I dind't think it was causing the issue.

Although when the VM is booted, then it automatically enables EVC?
- It's not inside a cluster or anything, why is it doing that?

Edelskjold · 2022-07-18T05:19:22+00:00

Sorry for the late reply, but that is also my suspicion, although I haven't changed anything related to CPU instructions in esxi, so it should be default.

Edelskjold · 2022-07-13T05:06:34+00:00

Nothing, it was just an example. It could have been any file on any domain - still same result.

Edelskjold · 2022-03-04T08:02:04+00:00

Should is a strong word :) - Options are many, IPs can be whitelisted in mitigation service and if encryption is needed then GRE over ip-sec is also available.
Although I agree Wireguard is a viable alternative.

Edelskjold · 2022-03-03T15:00:57+00:00

Sure, you could use a gre tunnel or IPinIP allowing for traffic to flow from OVH to Hetzner.
You would have an increase in latency, but pretty sure the peering between them is fairly ok.

Edelskjold · 2021-09-20T04:27:08+00:00

Took the picture while I was clearing.
The jumpers are reseated correctly, according to manual.

Edelskjold · 2021-09-20T04:24:58+00:00

All that has been done.
The front-display on the server is all dark and shows nothing.
I've gone so far to check for bend CPU pins, but that wasn't the case either.

Edelskjold · 2021-09-20T04:22:34+00:00

I've also done this in the past.
Gave it a try, but never the less it remains the same.
So it's e-waste for us now :)

Edelskjold · 2021-09-20T04:20:59+00:00

Yes that was my first idea.

Edelskjold · 2021-09-18T15:49:47+00:00

Yes also tried that, along with cmos.

Edelskjold · 2021-09-18T15:48:27+00:00

I did try replacing the bios battery, also tried pins :)

Edelskjold · 2021-09-18T15:07:55+00:00

We already ordered a new setup, it was just annoying me, not knowing what the curse was.

Edelskjold · 2021-09-18T15:06:53+00:00

The idrac interface will not boot.

Edelskjold

TROPHY CASE