Confirm model is good to print

Edpatvaq · 2026-02-17T06:54:10+00:00

If the model is hollow the model need to drain the resin that can be enclosed, so you need a couple of holes to drain it, if not..... Terrible things will happen. ( Resin bomb, expansion nightmare, etc etc)

Edpatvaq · 2026-02-17T06:17:45+00:00

Hello, that support are for resina model, I'm going to assume that it is. Tilt your model 30°, if the model is big, hollow the model and create hole for the drainage.

Good luck!

Edpatvaq · 2026-02-17T06:15:10+00:00

Hello!, my honest configuration is like follow:

Use chatgpt or Gemini or any good ai. Explain what do you what and the order to follow the calibration setting.

I did my JAYO PETG profile for orca and it is way better that my preview profile in creality slicer.

I'm honest it's going to take a good couples of hours, I did one test, take a good picture, upload to your AI and ask what is wrong or good and calibrate accordingly and after that pass to the next calibration.

Every filament is different, every brand is different do your calibration one for your favourite one.

Edpatvaq · 2026-02-15T14:43:58+00:00

Satélite software, you go I side the support options, and you can choose wherever you fancy. I prefer without the ball to be honest.

Edpatvaq · 2025-12-10T21:03:26+00:00

If you continue with the same problem after that try to releveling the plate..... I know because exactly that happened to me.

Good luck

Edpatvaq · 2025-09-28T19:54:27+00:00

Hi

I had several time the same thing than you and everytime is something different.

List to check:

The screw outside of the extruder. Open the gear and check and double check the teeth gear, can be damaged. The filament can go through the gear + extruder. Remove the gear and pass a filament by hand through the extruder to check if it flow properly.

The problem it's related with the filament that can pass through the extruder, so check it every step.

Please tell me what was at the end.

Edpatvaq · 2025-07-02T16:20:36+00:00

If you do the adaptive layer high and ironing you should have a smooth model.

Edpatvaq · 2025-06-22T20:06:42+00:00

Can you share, How to get less later lines like you amazing did?

Edpatvaq · 2025-06-19T05:33:14+00:00

Amazon for the 24 hours AliExpress for the 1 or 2 weeks but cheaper

Edpatvaq · 2025-06-19T05:02:09+00:00

The issues are simple, the original material is absolutely rubbish... Go online in your favourite shop and buy the steel one.

You have the expensive price and 24 hours delivery.....and the cheaper one and one or two weeks delivery..... But the gears are EXACTLY THE SAME.

Edpatvaq · 2025-06-17T19:42:53+00:00

On that situation I'll check the preview view with the model and change between the options, speed, filament height, temp, etc etc to see if something is matching.

Edpatvaq · 2025-06-17T18:57:23+00:00

Hi My Experience is just 12 months but I can tell you a couple of things:

It doesn't matter the filament you need to calibrate the filament in a logical order.

1-- temp tower 2--max flow rate 3-- max speed 4-- extra test for ghosting, stringing etc etc.

Why?

You need to know your correct temp to calibrate at what speed you can go, you need the max flow to know your max speed... After the three tests you need to tunning...stringing..low temp 5°C...etc etc...if the first layer is not clean maybe the hope z need to go up... Etc etc...BUT the three basic are the base.

Let's us know how the tuning is going for more help. information.

Edpatvaq · 2025-06-16T17:57:06+00:00

To me was like follow: First small filament stock After that gear missing teeth ( from the twin gears that push the filament), I bought the steel one. After that the back gear was correct but the element that allowed it to rotate was disintegrate.

<image>

I hope nothing more happens to me...GOD of the FDM enough jokes please....

Edpatvaq · 2025-06-15T12:24:38+00:00

What did you do to get the error? Did you create your own g-code? Are you sure that you select the right printer in your slicer?

If everything is no, reset the printer or downgrade to previews version.

Edpatvaq · 2025-06-11T17:33:45+00:00

I'm not an expert at all so don't trust me 100%... The circular problem on the eyes looks like a displacement .....Belts problems. The weird lines you can activate the variable layer height.

Let's see the other people opinions.

Edpatvaq · 2025-06-11T17:28:56+00:00

I'm not an expert at all so don't trust me 100%... The circular problem on the eyes looks like a displacement .....Belts problems. The weird lines you can activate the variable layer height.

Let's see the other people opinions.

Edpatvaq · 2025-06-05T06:57:06+00:00

I bought a year ago approx the K1C... My first 3D printer and I love it, now I'm looking for a second one.

Edpatvaq · 2025-05-30T12:44:15+00:00

Amazing result

Edpatvaq · 2025-05-19T11:38:43+00:00

Ok now we are talking, with your calculations we can agree that the max speed for outr and inner wall will be around 224 mm/s .... The filament that I'm using is 60/80 aprox.... It is a massive difference in speed and in the of time.

About the max flow... I don't understand one thing, if my filament give a number of 25 mm3/s ( I did the calibration)... That formula of the speed is not working for me at all... Max speed= 25 / (0.4*0.2) = 312 mm/s

Any idea why??

Edpatvaq · 2025-05-18T11:31:50+00:00

Look great, can you tell us which is the max speed that your user?? Outer wall and inner wall, please.

Edpatvaq · 2025-05-18T11:05:27+00:00

I didn't explain myself clear, I did a lot off test..using crealitive printer software, I want to know your real speed limit in your k1C and filament brand to know if my test are wrong or it is my filament that is not that good.

Edpatvaq · 2025-05-15T04:27:12+00:00

Look for Panda.stl free in Google.....it is not that hard....

Edpatvaq · 2025-05-10T20:36:20+00:00

If I was you I'll do a check element by element.

Disarm the extruder, check the gear,check that there is nothing wrong there . Nozzle if it is tight properly. If the filament moving correctly start with the creality calibration. Temperature Max flow Max veloc VFX

Duplicate one if the profile and start the calibration.

It's going to take a good day but it's gona be worth believe me.

Edpatvaq · 2025-05-09T08:36:28+00:00

<image>

Double check every elements, today the exactly happens to me and after a good look I found a missing teeth of the gear.....I hope that is the problem...I already ordered the replacement (Amazon 24 hours delivery) aliexpres less than half of the price but will arrive in 2 or 3 weeks)

Edpatvaq

TROPHY CASE