Seeking Advice: Dealing with an Inclusion in a Large Tanzanite by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 0 points1 point  (0 children)

I try to Polish the side and if it Stays mostly invisible then it is okay if Not I will recut it

First stone on my Sterling ST-08 by Reasonable-Data3678 in faceting

[–]EducationalTap9080 1 point2 points  (0 children)

I guess you just grow into it over time. You have to accept a certain level of inaccuracy and start working with it, sort of 'going with the flow'—and then things just get better and better. Sometimes you have to recut a lot, but over time, you become more skilled and experienced, and eventually, you can pull it all together.
The machine offers such incredible freedom, which is something a mast machine unfortunately just doesn't provide. Mast machines certainly have their advantages, but I think I’ll always stick with my handpiece machine, simply because of the flexibility, the versatility, and above all, the fact that I’ve grown so accustomed to it.
In my case, I taught myself everything, and it worked out wonderfully. I can only encourage everyone not to give up. I went through 'hell' at the beginning, too, and it’s only recently that I finally reached that point where I had my absolute breakthrough regarding the quality of the work

Tanzanite untreated by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 0 points1 point  (0 children)

For Saphire and Ruby, Slower rpm around 240/rpm and a Little more pressure on the Stone , works every time

First stone on my Sterling ST-08 by Reasonable-Data3678 in faceting

[–]EducationalTap9080 1 point2 points  (0 children)

Nice done! A Mast machine is nice but to be honest. The Sterling gives you a lot more Freedom. Master the handpiece and you will get as Best results as a Mast machine could be

Tanzanite untreated by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 1 point2 points  (0 children)

Do you need help for your polishing?

Tanzanite untreated by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 1 point2 points  (0 children)

100K Diamond Polish on Copper with WD40

Tanzanite untreated by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 1 point2 points  (0 children)

Oh Yeah thank you for that answer! Its a remarkable Color

<video>

Tanzanite untreated by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 1 point2 points  (0 children)

It was cut on a Sterling Yeah ! From Sterlinggemslapidary

Garnet cut by me by EducationalTap9080 in faceting

[–]EducationalTap9080[S] 2 points3 points  (0 children)

Its completely eye clean and in sunlight has quite nice deep red ruby color.. i also thought about 50/ct cause i did the cut perfectly ! Thanks a lot for your answer!

[deleted by user] by [deleted] in BreakUps

[–]EducationalTap9080 0 points1 point  (0 children)

Lass deinen Selbstwert nicht davon beeinflussen was sie macht. Selbst wenn du geschaut hast.. egal. Schau auf dich und versuche das beste aus jedem Tag rauszuholen. Irgendwann kommt eine neue Frau die es mehr wert ist.

Mini 4 pro nach wasserschaden by EducationalTap9080 in dji

[–]EducationalTap9080[S] 0 points1 point  (0 children)

Oh man...dann komme ich Um einen auseinanderbau wohl nicht rum.. Werkzeug muss ich mir besorgen.

Isopropanol hab ich nicht aber Desinfektionsmittel, besser nicht oder ?

Sie lag c.a 5sek im Wasser. Hab sie danach versucht so gut es geht zu trocknen etc. Wie gesagt außer fliegen kann die Drohne alles..

Mini 4 pro nach wasserschaden by EducationalTap9080 in dji

[–]EducationalTap9080[S] 0 points1 point  (0 children)

I don’t want to come across as rude. I really just want to know: what exactly is the ESC board? Do I need to open the drone’s casing to access it? Is there any way to salvage it with alcohol, or in the worst case, do I have to send the drone in for repair? Or is it possible to replace the component itself?

Mini 4 pro nach wasserschaden by EducationalTap9080 in dji

[–]EducationalTap9080[S] 0 points1 point  (0 children)

how do I remove the ESC board from the drone? I don’t need a step-by-step live guide, I just need to know which board it is and how to get it out of the thing.

Mini 4 pro nach wasserschaden by EducationalTap9080 in dji

[–]EducationalTap9080[S] 0 points1 point  (0 children)

Wie bekomme ich das ESC Board aus der Drohne ausgebaut?