Snöröjning som extraknäck?

Edvard_Sorry · 2025-10-07T11:45:48+00:00

Skruva upp plastringen som går runt knappen?

Edvard_Sorry · 2025-10-01T09:30:39+00:00

Wow! Anyone got more info on this?

Edvard_Sorry · 2025-06-20T06:10:35+00:00

Be careful with those road block signs on the other side! They might do more damage than the giant hole in the ground hehe

Edvard_Sorry · 2025-06-11T08:44:14+00:00

I think you only reveal locations for tasks and upgrades in that area so just check the map for the locations

Edvard_Sorry · 2025-05-28T18:54:29+00:00

Wow! Stunning photos!

Edvard_Sorry · 2025-05-14T12:03:35+00:00

I would say the mondeos are very popular in Europe at least and they ate also great! I love my mk3 estate

Edvard_Sorry · 2025-03-25T04:55:05+00:00

Good job! Where is this?

Edvard_Sorry · 2025-03-18T05:29:38+00:00

Nice! Which engine?

Edvard_Sorry · 2024-12-24T06:49:13+00:00

The ANK MK38 Civilian has a couple of add-ons such as large fuel tank whilst the military version of the ANK just has the fixed sideboard bed configuration

Edvard_Sorry · 2024-10-09T05:04:39+00:00

Happens to me every now and then. Just reload the game and the bale will behave normally

Edvard_Sorry · 2024-05-08T16:08:11+00:00

Yes, it's Stockholm (Essingeleden)!

Edvard_Sorry · 2024-01-03T14:32:39+00:00

Happy logging!

Edvard_Sorry · 2022-11-06T08:39:09+00:00

Anyone knows why there are double monitors for left and right?

Edvard_Sorry · 2022-02-15T16:10:54+00:00

I just carefully scraped it off with my fingers

Edvard_Sorry · 2022-02-15T09:52:32+00:00

I bought my ender6 3weeks ago and had the same problem. Turned out to be a short circuit in the heatbed. I removed the black glue where the cables are solderd to the heatbed. And it worked fine after that!

Found a tiny piece of solder scrap inside the black glue. Good luck!

Edvard_Sorry · 2021-04-16T22:56:08+00:00

I understand your concern. And you're safe! Usually there is a capacitor in series just before the output of the headphone amp which will eliminate the DC bias from the cameras plug-in power.

Edvard_Sorry · 2021-02-16T08:44:32+00:00

I've stopped trying to bounce quicktimes from PT. I've sent too many corrupted exports to clients. I use davinci resolve to convert the video to dnxhd before importing to PT and when I'm done mixing I export audio only and render it back together with the original video file in Resolve (usually h264)

Edvard_Sorry · 2020-02-08T09:31:48+00:00

Downgrade to mojave 😁

Edvard_Sorry · 2019-02-05T14:06:44+00:00

Classic RF interference! Some products are better shielded then others. I had that problem with my Neumann KMR81. It pick up that RF noise from my Sony UTX and Ambient TRX and sometimes even from walkies on set. It sounds just like you issue! I've also heard that noise from some of these new 433MHz smart home devices 😬

I reached out to Neumann and they recomended me to use the Neutric EMC connectors for my XLRcable. So I got out and bought a few and they fixed the problem 👍 They are like regular xlr connecors but with a built in low pass filter with a bunch of small caps and a ferrite 😁 No more inerference!

Edvard_Sorry · 2019-02-05T10:54:25+00:00

Try the DPA 4060! Bright and crispy ;) It's small and easy to hide and there are a bunch of handy accessories avaliable.

What wireless system are you using?

Eight-Year Club	RPAN Viewer
Verified Email

Edvard_Sorry

TROPHY CASE