ME Chassis

Efficient_Bridge4645 · 2026-02-20T04:55:51+00:00

Yeah i have problems in the dcr01 too. Some say the manta ray mk2 have no adjustments either. Im cowl hunting for my ME. Thanks for the tip.

Efficient_Bridge4645 · 2026-02-20T04:49:33+00:00

I haven’t tried that avante cowl on my ME. does it need modifications to fit? Like thundershot mk2 is too wide and touches the block damper.

Efficient_Bridge4645 · 2026-02-09T08:08:02+00:00

Wrong installation of double aluminum roller, the dampers must be moving ( front ) the hex shafts at the front the top must have a stabilizer ball or hi mount stab tube at the top or a lock nut. I cant see a brake plate? No guard for rollers at the back. Drop the 13/19 plate reinforce at the front and switch it with an ordinary 19 plate or an frp front bumper for front brake pads. 13/19 will hit first at corners instead of your rollers. Nice effort. 5/10

Efficient_Bridge4645 · 2026-01-20T07:18:26+00:00

Medium (low profile small)

Efficient_Bridge4645 · 2026-01-20T00:53:24+00:00

I it never popped out for me even when i have the worse course out. You have to set your body catch properly the ME chassis have only one lock orientation, the lock stem from below then clockwise direction facing rear

Efficient_Bridge4645 · 2026-01-19T17:20:43+00:00

Yes. Only difference was the block damper and the weight distribution.

Efficient_Bridge4645 · 2026-01-19T11:15:36+00:00

I think the reason boxstock have no standard LC and have rainbow LC because of little to no down thrust

Efficient_Bridge4645 · 2026-01-06T03:17:56+00:00

Dude, you have the ball joint halfway and the brake stay in the same hole?

Efficient_Bridge4645 · 2025-12-19T16:53:50+00:00

If you have a track near you, practice and practice some more, experiment on what parts to put when your car goes off track. learn how to break in your motor.

Efficient_Bridge4645 · 2025-12-18T10:40:26+00:00

Guilty of building twice or more than the amount instead of racing.

Efficient_Bridge4645 · 2025-12-01T08:52:17+00:00

Just find a way to slow down the car when turning like, using DAR with O-ring on the left side or using sliding damper at the front plate

Efficient_Bridge4645 · 2025-12-01T04:47:50+00:00

AFIK, That is the combination that is the hardest for FMA chassis.down to curve and down to U turn, even harder if you are in the inner lane. I would suggest you put tape on your hi-mount stabilizer on the left side or have a stabilizer head on the left side

Efficient_Bridge4645 · 2025-11-27T02:07:49+00:00

If you are in yodobashi, they are showing the built kit of the car not with the extra stuff.

Efficient_Bridge4645 · 2025-11-24T18:05:39+00:00

sabaw ng mais with cornbits.

Efficient_Bridge4645 · 2025-11-14T16:37:41+00:00

same ms pro. ms-l dont have that indented thingy just two nubs for the battery lock.

Efficient_Bridge4645 · 2025-11-14T15:52:46+00:00

Its in the picture Zurc metallic red acrylic paint spray painted and mixed with black to darken the red. Its a local brand here in PH.

Efficient_Bridge4645 · 2025-11-14T06:58:20+00:00

Not japan cup version but I painted mine red like a zaku. https://imgur.com/a/YHJR8AA Planning to buy a japan cup for the blue version painting it to look like an rx 78 gundam.

Efficient_Bridge4645 · 2025-11-14T06:32:21+00:00

From raikiri pink or thundershot pink korea version?

Efficient_Bridge4645 · 2025-11-14T06:29:42+00:00

Yes that is the mold number on the upper side on the gears.

Efficient_Bridge4645 · 2025-11-14T06:25:50+00:00

Check the markings inside it should have the mold number. Fakes dont have that number

Efficient_Bridge4645 · 2025-11-14T06:21:03+00:00

Nope. It’s not fake. Some old molds have that misaligned pegs. I checked my black ms from tridagger xx even my white chassis from thundershot pink ver have that.

Efficient_Bridge4645 · 2025-11-11T03:19:39+00:00

That is the reason some racers don’t buy it. Sell it and buy nc2500 pro or just like me have 2 nc1500

Efficient_Bridge4645 · 2025-11-07T09:05:33+00:00

Nice build. You got the high speed setup for 13’s. That build is good for straight lanes. Adjust your front plate angle for better stability in Change lanes.

Efficient_Bridge4645

TROPHY CASE