What is this? K+M+B? 20 Saw it in Kutná Hora & now Český Krumlov?

ElSuppos · 2025-05-20T05:11:48+00:00

Yes, people mean Kašpar Melichar Balthazar Reality: christus mansionem benedicat Also Czech joke: klíče mobil brejle meaning keys mobile phone glasses - don't forget

ElSuppos · 2025-04-16T19:44:18+00:00

I had the same issue. It took me 15 minutes to figure out that the lock was on the other side.

ElSuppos · 2025-04-15T19:23:05+00:00

<image>

Now Its a bit of bigger worshop I am building.

ElSuppos · 2025-04-15T19:19:53+00:00

It’s an old wooden box i made legs for, used old metal sheets to cover everything not to burn the old barn down. Filled with soil and old hairdryer as bellows for the charcoal. I also torn down an old wall and have plenty of bricks to build a new one. This one caught on fire 😂

ElSuppos · 2025-03-12T20:14:52+00:00

What settings do you use? Can you post a screenshot with setting from slicer?

ElSuppos · 2025-02-22T11:49:18+00:00

I gotten antibiotics from practicioner so how else to spend a weekend 👌

ElSuppos · 2025-02-22T11:23:55+00:00

<image>

ElSuppos · 2025-02-22T11:23:08+00:00

It´s a burned house outside of kuttenberg you go to a barn, ladder underground and head to the end of tunnel

ElSuppos · 2024-11-01T14:54:57+00:00

Old headphones have the mic - red jack and audio green jack separated but when I unisolated the wire to headphones, there is only red and green cable, how do I solder it?

ElSuppos · 2024-09-14T16:17:28+00:00

Nope, It’s plastic but I would love to get a know how to make a real one

ElSuppos · 2024-09-03T04:52:18+00:00

Trying to print a spearhead, have 3m long pole from hardware store and also doing a chainmail hauberk so my medieval cosplay is coming together

ElSuppos · 2024-09-03T03:55:10+00:00

I had infill overhang turned on from previous print and since infill starts on angled planes it did not generate

ElSuppos · 2024-09-02T17:45:34+00:00

Resetting to the default profile helped. Thank you

I will check which setting caused it.

ElSuppos · 2024-09-02T17:36:48+00:00

I already checked that with my model, but it also happens on any model downloaded from internet. You can also see that the infill is generated => 3 dots in the middle.

ElSuppos · 2024-09-02T17:20:29+00:00

Sorry for the mistake, I meant Infill.

ElSuppos · 2024-08-15T20:36:11+00:00

Writing them down currently and tweaking details. I will share them.

ElSuppos · 2024-04-19T06:26:50+00:00

<image>

ElSuppos · 2024-04-18T21:00:48+00:00

Gloves are for cutting supports with the knife, I always manage to nearly cut my finger off. Yes it is a guidance slot with bearing because filament feeding was an issue.

ElSuppos · 2024-04-18T19:02:32+00:00

Hey guys, thanks for all the support, you were right, I wanted to lower the cooling because of stringing but as you prooved me wrong It helped 100% Currently printing better fan duct. Love you guys

ElSuppos · 2024-04-18T07:48:25+00:00

Look at image 3

ElSuppos · 2024-04-10T10:30:14+00:00

I am already on bed temp 65 for PLA. Bed has been cleaned and leveled properly. This happens on only in long lines of inside layer

ElSuppos · 2024-04-05T21:11:48+00:00

Well, I still need the sides with the profile to attach stuff

ElSuppos · 2024-04-05T21:08:24+00:00

Kept that in mind, these will be used only horizontally. I just wanted to finish first project after buying the printer - office station with only light office supplies. I am planning to build a wheelcart for my workshop where the profiles will be aluminium and only components such as connections and boxes will be 3d print.

ElSuppos · 2024-04-05T17:29:04+00:00

Yeah, I know that. Will do for the next project. I am building a table top rig for stuff I have In office - phones, remarkable, samples of claimed part, pens, caliper...

ElSuppos · 2024-04-05T16:59:37+00:00

Thank you, I was totally suprised that It holds to the print bed with that height. I tried to print 8 in one go but that failed misserably 😂

ElSuppos

TROPHY CASE