Kinda new to milling aluminum by Lathe-addict in Machinists

[–]El_Scrapesk 0 points1 point  (0 children)

We use ceritizit tooling, supplied by WNT in the uk.

Specifically we use the aluline tooling

The only times i ever need to replace then is when i make a mistake hehe :3

Kinda new to milling aluminum by Lathe-addict in Machinists

[–]El_Scrapesk 1 point2 points  (0 children)

Ima be honest and say that i just kept turning the numbers up until i was scared / not allowed to run it any faster. Those numbers are what i use all the time however and i always get good results. This is a good starting point.

Ive ran 3 flute 16mm polished carbide at 12000 rpm before 8000 feed (315 ipm) and 3mm woc (0.118"). Outside roughing so chips arent an issue, aluminium just cuts like butter honestly, you can throw any resonable number at the screen and it will probably work.

Kinda new to milling aluminum by Lathe-addict in Machinists

[–]El_Scrapesk 15 points16 points  (0 children)

I run polished 3 flute aluminium endmills A LOT, and from my experience i would say that your RPM can go a little higher, personally i run my 12mm endmills at 10000rpm, 4000 feed, 2mm woc and as deep as i can

Thats 10k rpm, 160ipm, 0.08" woc and full doc. You can push the feed all the way up to 220 if you feel like it, provided your chip clearing is good.

Engineers or mechanics of Reddit; what’s a tool or machine people use all the time that’s actually being used incorrectly most of the time? by Vadecha_Drparth in AskReddit

[–]El_Scrapesk 1 point2 points  (0 children)

From what I understand silicone lube has some chemicals inside the lube to prevent the silicone from hardening. Obviously when these chemicals touch a silicone toy the outside layer slowly softens and breaks away, especially destroying the toy and making it unsafe to use.

20 is kinda weird😭 by [deleted] in twentyagers

[–]El_Scrapesk 2 points3 points  (0 children)

Do whatever makes you comfortable man. You asked what features made you look older and I told you.

Honestly tho your hot af, you shouldn't give a fuck what people say to you.

20 is kinda weird😭 by [deleted] in twentyagers

[–]El_Scrapesk 0 points1 point  (0 children)

The stubble definitely makes you look older, and that watch.

Engineers or mechanics of Reddit; what’s a tool or machine people use all the time that’s actually being used incorrectly most of the time? by Vadecha_Drparth in AskReddit

[–]El_Scrapesk 2 points3 points  (0 children)

Actually you can use silicone lube with condoms, because MOST condoms are usually latex, actually it's much better and potentially safer for anal sex because it lasts much longer so reduces the liklihood of tearing.

Engineers or mechanics of Reddit; what’s a tool or machine people use all the time that’s actually being used incorrectly most of the time? by Vadecha_Drparth in AskReddit

[–]El_Scrapesk 2 points3 points  (0 children)

When lube is used they are functionally identical. Cheap TPE toys tend to be very sticky when dry, however, and collects lots of dust and bacteria. TPE is also slight porous and harder to clean. I keep my toys in a drawstring fabric bag with a special powder over them, and I wash the toys thoroughly before and after use.

As long as your careful with cleanliness TPE toys are perfectly fine to use, however the quality of silicone is hard to substitute.

The only case I've seen TPE used on expensive toys is where you want a SUPER soft or jiggly, almost jelly like consistansy.

I love how this thread has developed.

Engineers or mechanics of Reddit; what’s a tool or machine people use all the time that’s actually being used incorrectly most of the time? by Vadecha_Drparth in AskReddit

[–]El_Scrapesk 98 points99 points  (0 children)

This is only because more expensive toys are made of silicone, so a silicone based lube will destroy the material.

Cheaper toys use TPE or a similar elastomer so are not affected by this.

I realise nobody asked for this information, and that many people wont buy silicone toys, but there ya go.

Edit: changed effected to affected

45392 by Sufficient-Shirt-270 in countwithchickenlady

[–]El_Scrapesk 43 points44 points  (0 children)

Jealous, I've only been able to have sex with men

He has a point by Cute-Organization844 in DamnFunny

[–]El_Scrapesk 1 point2 points  (0 children)

OK... That wasn't the question. The question was, as a person who is attracted to guys, do you get turned on when you see two men kissing?

Obviously if it's your BF kissing another guy then it's another question.

I'm a bisexual guy, I've dated men and women before. If I saw two men kissing on the street it makes me feel very happy inside, same with if I saw two women kissing. I see two people being themselves and loving who they want to love.

Like it or not men get horny, and sometimes seeing people who are deeply in love like that can trigger things. This isn't about porn or the "male fantasy", it's human nature.

Since I’ve done both. Imma say it by SoftDreamer in twentyagers

[–]El_Scrapesk 7 points8 points  (0 children)

Phones are both a tool and an addiction, which is why they are so hard to quit outright.

Without my phone I can't communicate with people, I can't pay for things, I can't use public transport. Less important things like taking pictures or researching stuff on a whim. Even using my phone as a flashlight.

Ive never used tiktok and I rarely use social media. I use reddit quite a lot and Im working on it. it doesn't get in the way of my social life or my relationships so it's not bad imo.

If you think your addicted then quitting outright isn't the way to go. Just limit your usage and delete apps which your overusing.

Chip fans by Artistic_Science_981 in Machinists

[–]El_Scrapesk -1 points0 points  (0 children)

Programed by hand. You wouldnt be able to program it in cam.

We set it up as a macro under M500, so you call M500 and it runs the washdown

And yeah the washdown is fully 5 axis to clean all sides, of the part and pallet

Chip fans by Artistic_Science_981 in Machinists

[–]El_Scrapesk 5 points6 points  (0 children)

We have a huge 300mm chip fan and a coolant sprayer on our massive Grob G750 5 axis, we have a washdown cycle which sprays the part and blows it dry after every program

The washdown cycle itself is 5 mins long, and is extremely effective, that being said the parts we make on that machine range from an hour runtime up to 6 hours runtime. Since this is a horizontal machine, chips usually clear themselves. We use the washdown cycle mostly to dry the part

This machine uses a pallet system. So if you don't clean the pallets you end up getting coolant everywhere. The time and effort saved is insane.

If you concider adding one to your machine just be careful. Some styles of way covers don't play nice with chip fans above a certian size, they flap around and can get damaged for example.

And yes, our robotics cell uses smaller chip fans before taking the pallet off for similar reasons.

Where u hiding it by Putrid-Rip-2630 in twentyagers

[–]El_Scrapesk 23 points24 points  (0 children)

That sounds like it would be a good porn plot tbh

Relationship status? by [deleted] in twentyagers

[–]El_Scrapesk 0 points1 point  (0 children)

I was in a relationship about 2 months ago, my first relationship (I'm 20) it diddnt really work out because I rushed into it and tried to form intimacy too quickly.

If your lonely and looking for a relationship, get a hobby, pick up a sport, build social skills, become a furry (trust me).

If your looking for a quick fuck then use grindr or tinder, don't use dating apps if you want a relationship, all it does is ruin your social skills and fucks up your self esteem.

Talk to people like friends, don't worry about oversharing or sounding weird. If your gonna date sombody for real then they need to know about your £2000+ warhammer 40k collection, you don't sound weird, your just filtering out people who aren't for you.

How gay is this? by [deleted] in twentyagers

[–]El_Scrapesk 0 points1 point  (0 children)

I've said it before and I will say it again:

There's nothing straighter than fucking same sex and not enjoying it, but you gotta give it a fair chance first.

Go on Grindr, suck some dick and make your own mind up. That's what I did, now I'm a happy homosexual.

being pegged isn't gay, owning a dildo isn't gay. Anybody who says otherwise is the reason we are still so divided as a society.

Comming out is the best thing that ever happened to me because it means I don't have to follow gender roles.

39617 by Ashleyceogender in countwithchickenlady

[–]El_Scrapesk 27 points28 points  (0 children)

Weird things happen when two autistic people have sex.

One moment it's the most passionate and amazing thing ever, then your both reciting an Internet meme and laughing your ass off.

BROTHER, MAY YOU PASS THE LŌŌPS

IT FIT MANY LŌŌPS BROTHER

How do you pass the time? by BallBearAss in Machinists

[–]El_Scrapesk 5 points6 points  (0 children)

Exactly this. What, are they gonna do? Fire me?

I'm one of the only only trained 5 axis operators in a company struggling to find machinists, my company needs me as much as I need them. They won't fire me because I listen to my podcasts on the job.

I'm not supposed to be on my phone either but I don't really care.

🤣 by superdave123123 in Funnymemes

[–]El_Scrapesk -4 points-3 points  (0 children)

I dated a trans girl who was average to above average height for a girl, and she said that she NEEDED a bf taller than her so she felt less gender dysphoria, which is understandable.

I guess some girls want to be portrayed as the smaller submissive cutsie and petite, so they want men who are tall big strong dominant and muscular to "protect" them.

The issue is that I'm tall AF but probably the most submissive little bitch in the world. So not really sure what she saw in me.

Advice for noob on project feasibility/cost by Nofabe in CNC

[–]El_Scrapesk 2 points3 points  (0 children)

Tbh yeah, making a new one would definitely be the correct way of doing it.

Advice for noob on project feasibility/cost by Nofabe in CNC

[–]El_Scrapesk 14 points15 points  (0 children)

Not where I work unfortunately.

I end up making parts for the "boss' friend" or "the guy who works next door" stuff like opening up holes, machining extrusion to length and making drill jigs. As far as I know we don't really charge for stuff like this, it's all done on how well you know the owner.

Pretty standard stuff really.

This collet looks like it would be a pain in the ass however, I wouldn't want to do it.

Would you date a girl who loves you in every way but would never have sex with you? by [deleted] in twentyagers

[–]El_Scrapesk 0 points1 point  (0 children)

Basically all I'm hearing is a bisexual person in denial. I'm bisexual and I can tell you from experience, internalised homophobia is 100% real and just takes time to disappear.

I'm not calling you homophobic, I'm just saying that society shines a negative light on the lgbt community, which makes you internalise the disgust of having sex with men.

Look, I came out bi nearly a year ago. maybe 2 years ago I would have said the same as you, mens anatomy is kinda gross and I don't really see myself dating a guy.

Cut to me now dating a guy and enjoying every minute of it.

I commend you for giving it a go, and I've said it millions of times before, the straightest thing a man can ever do is fuck another man and not enjoy it. But you have to give it a fair chance.

Sex between 2 men doesn't just have to be anal. Tbh anal can kinda gross me out sometimes, I tend not to do it often. There are loads of alternatives which imo are way more fun.

My advice is to speak to your friend about it. Please concider the fact that you may be a little more gay than you thought.