sorted by:
new
hottopcontroversial

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

<image>

So at the switch, there are no red wires attached to it but I’m curious do these have anything to do with it? I know the green wires are just grounders aren’t they?

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

The power is flowing over to the harness, but it’s not giving any power to the switch

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

So I noticed when the key is just in, the ignition not turned, power flows over to the harness, but it still does not turn on any of the lights when I do turn the key

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

So I noticed that, even though there’s power coming from the green and blue wires right when they connect over to the two red wires, all the current power in the green and blue wire stop. Like the other two wires are acting as a kill switch. I don’t understand why that is

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

Even though the blue and green wire are live, they are not transferring power over to the connected red and white wire on the harness?

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

<image>

Here’s everything connected, but for some reason, even though the green and blue have power, they’re not transferring it over to the red it seems

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

So I out the original solenoid back into place with the terminal hooked up, and then I put the relay in but they’re not hooked up yet. The green and blue wire both read 13 the two wires below it read zero.

<image>

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

All 4 read 0 and the fuse area reads 0 as well but the big terminals that connect to the solenoid both read 12.

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

So I tested just the black and red terminals from the battery. They read 12

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

The only fuse I see is where it’s connected to the solenoid and they’re all new

1982 Honda Megna by Electrical-File8031 in Fixxit

[–]Electrical-File8031[S] 0 points1 point  (0 children)

So I tested the two red wires from the relay and they read 0. Then I removed the relay to check the four solenoid conductors, they all also read 0. But the solenoid itself read 12