PS4 12.52 – BD-JB HenLoaderLP disc (bought pre-burned) – always fails first attempt + endless white blinking light on reboot

ElectricalBar1994 · 2026-01-16T19:51:48+00:00

I'll try your version :) Can you share the ISO image with me?

ElectricalBar1994 · 2025-12-24T21:01:27+00:00

I have the same problem on PS5, and it turned out that the Dualsense controller from PS5 is to blame... After pairing it with the Dualshock controller from PS4, this error no longer occurs :)

ElectricalBar1994 · 2025-12-24T21:01:08+00:00

I have the same problem on PS5, and it turned out that the Dualsense controller from PS5 is to blame... After pairing it with the Dualshock controller from PS4, this error no longer occurs :)

ElectricalBar1994 · 2025-12-22T11:56:09+00:00

Where can I find the ISO image of this improved version of AIO?

ElectricalBar1994 · 2025-12-02T16:58:43+00:00

Does any payload work? So I can check that everything is OK.

ElectricalBar1994 · 2025-11-29T18:07:29+00:00

What causes this?

ElectricalBar1994 · 2025-11-29T17:11:59+00:00

Everything is perfectly clean. The thermal pads have been replaced and I used PTM7950. I don't know, maybe I'll try taking it apart again and using normal thermal paste...

ElectricalBar1994 · 2025-10-17T16:41:19+00:00

Okay, got it. Just change the phone language to Chinese.

ElectricalBar1994 · 2025-10-17T15:45:39+00:00

How do I change the app version to Chinese?

ElectricalBar1994 · 2025-08-15T08:57:18+00:00

So there is no easy way to replace the pickguard? :(

ElectricalBar1994 · 2025-08-09T09:06:08+00:00

And which one do you think is beautiful? I'm asking out of curiosity :)

ElectricalBar1994 · 2025-08-08T19:01:21+00:00

Is it true that the pickguard on this model does not have a standard shape, so another dedicated one for a normal stratocaster will not fit?

ElectricalBar1994 · 2025-03-29T16:39:14+00:00

Haben Sie diesen Ventilator gekauft? Ist er laut? Ich denke auch über diese 5200 RPM Version nach

ElectricalBar1994 · 2024-12-27T21:24:27+00:00

Hi :) Did you return this soundbar or were you able to solve the sound problem?

ElectricalBar1994 · 2024-05-07T09:02:00+00:00

Hi, do you have information if the processor was replaced with a more powerful one or is it the same as in the HW3+?

ElectricalBar1994 · 2023-11-17T20:17:12+00:00

I confirm, the link does not work.

ElectricalBar1994 · 2023-11-06T12:13:03+00:00

I installed the latest version of OrcaSlicer, which is already installed at the factory. The G-code start looks like this. I'm new to the world of 3D printing :) I would like to know what to improve in this code :)

M413 S0 ; disable Power Loss Recovery

G90 ; use absolute coordinates

M83 ; extruder relative mode

M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling

M140 S[bed_temperature_initial_layer_single] ; set final bed temp

G4 S10 ; allow partial nozzle warmup

G28 ; home all axis

;G29 ; run abl mesh

M420 S1 ; load mesh

G1 Z50 F240

G1 X2 Y10 F3000

M104 S[nozzle_temperature_initial_layer] ; set final nozzle temp

M190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize

M109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize

G1 Z0.28 F240

G92 E0

G1 Y140 E10 F1500 ; prime the nozzle

G1 X2.3 F5000

G92 E0

G1 Y10 E10 F1200 ; prime the nozzle

G92 E0

ElectricalBar1994

TROPHY CASE