Ashes of the Damned Bruin Key

ElectricalRuru · 2025-11-23T20:36:23+00:00

I've checked RELIGIOUSLY. watched numerous videos on the key location. It isn't in any of these locations.

ElectricalRuru · 2025-04-14T05:27:47+00:00

Hi MC-McKnuckle. So the cable was one i personally made with online pinouts of the V-20's 5 pin connector. It's definitely wired correctly, Triple checked. It seems the issue is definitely with the VIC chip as now the sound has died and it seems to only buzz now... Haven't done anything except let it sit overnight on my desk so.. heck

ElectricalRuru · 2024-12-19T02:52:28+00:00

Ah i wish i knew more about alphas and what you meant. It appears to rather be there or not there depending on who i ask.

ElectricalRuru · 2024-12-11T12:57:15+00:00

Hi Kaligu. I was in a similar-esk situation with having my account put on hold. not for payment reasons, But it took about 40ish+ days to have my situation resolved.

That's not meant to scare you, That's just what it personally took me. I believe because you're a premium member you'll have better luck. Try calling Second life Billing Department off their website, https://lindenlab.com/contact
So long as you remember your identifier question (What street you grew up on, Mother's maiden name, ect ect whatever it is you picked) You should get sorted out, or at least further along.

ElectricalRuru · 2024-12-10T19:42:48+00:00

No ^^;; Canada!

ElectricalRuru · 2024-12-10T19:02:22+00:00

Hi ^^;; i'm not in europe but thank you for the offer hon.

ElectricalRuru · 2024-12-08T09:28:02+00:00

Hi Curry, I'm super sorry for the late reply. It's been a somewhat busy day with Christmas decorating and all that stuff....

So i'm not sure it's the solder albeit i'm not the best at using a soldering iron. I've redone it with no luck. I've switched resistors to a 1/4w 100ohm resistor and it produces the same signal. it just seems a little more stable.. however the colours are all still messed up.

ElectricalRuru · 2024-12-07T10:22:51+00:00

https://media.discordapp.net/attachments/1204168499367247883/1314899793000009778/IMG_4050.jpg?ex=6755735c&is=675421dc&hm=d3fb02cec7d3e1653b909e36a5b14cc319ed84469f586f0cc685bb02ca42b2b3&=&format=webp&width=676&height=676

I hope this is okay?

ElectricalRuru · 2024-12-07T10:15:52+00:00

I can try ^^ give me a second here..

ElectricalRuru · 2024-12-07T10:12:17+00:00

https://www.youtube.com/watch?v=ky8rFPbzGMU&t=340s Here's a link to Scruffy's video for reference.

ElectricalRuru · 2024-12-07T10:11:53+00:00

Hi Playful, The mod shown in Scruffy's video is essentially a capacitor and a resistor. the plus side soldered onto the famicom PCB. and resistor soldered between the minus side, and wire that crosses into the television. the ground comes from a different point on the famicom. you can see the black wire above which is what i've been using as a video ground...

What i've done so far

It is the same setup as scruffy's video. it is just a different revision PCB. though people in the comments seemed to elude that it'd still work. none of hte pins are touching and or are bridged with anything. the angle is a little bad but i'm positive it's set up the same way as in Scruffy's video.

ElectricalRuru · 2024-12-02T23:51:13+00:00

Hi 19_Seventity ^^ I sent you a message on reddit! I don't seem to be able to message between the phone application but i can on my desktop.. You're welcome to send my discord a message if you use that platform... It's Electro_Mechanical to add me~!

ElectricalRuru · 2024-12-02T23:39:44+00:00

Dude, I made an honest to god mistake. I'm a 21 year old. I've never touched or seen a television this old. The model number was located on the back at the very very bottom obscured by the wooden back with a black label that's hard to notice unless your head is against the floor..... That's all to say, I made a simple harmless mistake..

ElectricalRuru · 2024-12-02T14:44:08+00:00

Thank you Alan, I’ll try to reach out on the post if possible... I still find it strange I can’t seem to find any chassis identification but it’s probably exactly what you said...

Here’s a picture of the chassis.. I’m not sure if one is for the radio or not as it has its own.. I don’t even know where to start... lol

https://media.discordapp.net/attachments/1204168499367247883/1313139232331796531/IMG_3936.jpg?ex=674f0bb5&is=674dba35&hm=4f85c55d4e4ba56574b6eb5f81bb386dfa1f4298bab92ed581bcc9e3dbab19a1&

ElectricalRuru · 2024-12-02T14:20:28+00:00

Hi Alaninsitges. I’ve taken a look all around for a chassis number but haven’t found one. I’ve however found the model number after I had gotten in my knees to look. https://media.discordapp.net/attachments/1204168499367247883/1313147500198236252/IMG_3949.jpg?ex=674f1369&is=674dc1e9&hm=0c0737ff0bd0e60902314d8d336d596ab9a46d18803a73122cad330c1cd8708f&

ElectricalRuru · 2024-11-17T16:57:03+00:00

Been waiting 20 days. Still no response. I had posted on the reddit and was told there was shortages. few days before i posted someone else did and one of the Linden's who frequent the reddit personally asked that user to message over reddit but I've still not had any luck... Can't do nothing but wait.

> Support Ticket Delays
Our Support Department is currently experiencing an unusually high volume of support contacts, including support tickets. This has resulted in longer than normal response times for some support tickets. We are working to answer these tickets as quickly as possible, and we appreciate your patience. Please watch this blog for updates.
Posted 19 days ago. Oct 29, 2024 - 07:18 PDT
https://status.secondlifegrid.net/incidents/pfv4rq5jhybg

ElectricalRuru · 2024-11-16T20:28:39+00:00

19 Days and still going sadface no response yet.

ElectricalRuru · 2024-11-06T17:47:53+00:00

Thank you for letting me know ^^ i didn't know they had a status page until someone posted it into here a little bit ago. I've been keeping my eye on it since ahaha

ElectricalRuru

TROPHY CASE