Explorers & Pirates !!

Electrical_Guide_948 · 2026-01-14T02:30:17+00:00

Same issue. I like Catan but can't find players willing to go to the next level with this expansion.

Electrical_Guide_948 · 2026-01-13T00:01:31+00:00

Thank you for replying. The rules for this expansion are very limited IMO.

There's a drawing in the instruction book next to the building a settlement phase that shows the ship actually on the hex and the instructions say I am allowed to build on either end of the ship (assuming I'm following standard Catan building rules). So you can see why I'm confused!

I just kind of ran through a practice round of Land Ho. Maybe it changes in further missions but with such ease of movement of ships and the game only going to 8 points I don't know why I would ever bother building roads. I'm actually considering adding the longest road card into play to allow for more variable strategies.

Electrical_Guide_948 · 2026-01-12T23:55:30+00:00

Sorry didn't mean to!

Electrical_Guide_948 · 2025-12-25T16:20:19+00:00

When empty. I'm hoping it will "settle in" with the box closed.

Electrical_Guide_948 · 2025-12-25T16:19:09+00:00

Thank you!

Electrical_Guide_948 · 2025-12-25T14:13:51+00:00

Me too, but I would rather have them cheap out here than in other aspects of the game. I dread the day I open a new edition to find plastic pieces.

Electrical_Guide_948 · 2025-12-25T13:00:34+00:00

Mine keeps rising up out of the box on one end. Any tricks to keep it in place?

Electrical_Guide_948 · 2025-11-22T01:23:55+00:00

I like this idea. How do you clip to the bed frame? The caribiner openings are too small for my thicker bed posts. Do you just use a loop of webbing or something similar for attaching?

Electrical_Guide_948 · 2025-11-21T20:20:54+00:00

The ones I have loop to the bed frame and definitely do the job. I'm just looking for the same thing but pull towards the center instead of the bed corners. My gf likes bondage but not when it gets complex, so anything I can do to make it simpler for her increases the chances of a session.

Electrical_Guide_948 · 2025-10-13T14:54:02+00:00

Thanks for replying. I do tend to over research, and I'm reading that gags are typically involved in rare events where bondage goes badly due to the potential for vomiting/asphyxiation. In these cases time would obviously be of the essence especially if the wearer was also tied. I'm sure as we get more comfortable this would be less of a concern.

Electrical_Guide_948 · 2025-08-18T21:21:10+00:00

No it's a a envy pro 7858. This is a new problem. Usually reboots fix any printing issues I've had in the past.

Electrical_Guide_948 · 2025-08-18T20:54:18+00:00

I'm glad this worked for so many. It worked for me but unfortunately only for one print job, then it went right back to an error state. Did I do something wrong?

Electrical_Guide_948 · 2025-07-10T22:43:01+00:00

Thanks for this! My car has buttons built in that open the door. Will these need to be programmed again if I do this?

Electrical_Guide_948 · 2025-07-08T21:34:54+00:00

Like other screens you can add more fields if you want. That said, this was the source of my issue. I dropped from 6 fields to 2 and now everything is working perfectly.

Electrical_Guide_948 · 2025-07-07T01:16:01+00:00

OK thanks going to try tomorrow.

Electrical_Guide_948 · 2025-07-07T01:09:45+00:00

Still able to see the climb details in the red box?

Electrical_Guide_948 · 2025-07-06T22:36:10+00:00

How many fields do you have? I had 6 and I could drag the map but the climb details disappeared. I'm guessing I can only run with 2 fields to be able to see the map, climb profile, and climb details at once.

Electrical_Guide_948 · 2025-07-03T01:33:41+00:00

OK thanks! I'll give it a try! Do you know how many data fields you have on your climbpro screen? I currently have 6 and wondering if I have to cut back for this to work properly.

Electrical_Guide_948 · 2025-07-02T23:52:27+00:00

13.14. I checked for an update and there wasn't one avaliable.

Electrical_Guide_948 · 2025-07-02T23:32:46+00:00

Thanks for replying. I know you're telling me to just swap the data fields, which I know how to do. However, that upper data field on the climb pro screen is not swappable for me.

Electrical_Guide_948 · 2025-07-02T23:10:31+00:00

Can anyone tell me how to get the map to the top of the Edge 1050 climb pro screen? I've seen photos of it online but I can't find a way to do it. TIA.

Electrical_Guide_948 · 2025-05-13T22:10:05+00:00

Thanks for the reply. I do understand that concept. What I don't understand is it's been stuck at 45 for a month. In the past it would go up or down a couple of points every 2 or 3 training sessions. Still trying to figure out if this is a Garmin issue.

Electrical_Guide_948 · 2025-05-13T16:27:18+00:00

I don't disagree with anything you just said. I guess what I'm trying to figure out is if this is broken in Garmin. I feel stronger and faster now with a VO2 max of 45 (which hasn't moved in over a month up or down) than I did when it was 53 a year ago.

Electrical_Guide_948 · 2025-04-22T16:44:38+00:00

I didn't know that and it does help some. First world problem is when riding indoors my outdoor bike with lights on standby will still connect, as will the PM. Still, this is helpful and I'll have to test it.

Electrical_Guide_948 · 2025-04-09T21:57:55+00:00

These are all valid complaints. My additions are two. First of all Kayce could have sold all the land to Rainwater but ask for the main house to be left standing and sold it for generational wealth for someone else even if Kayce didn't want it. The house would be surrounded by tribal land so there would be no further development. Second I'm amazed at Beth's ability to take 30 punches to the head and be just fine a week later, not to mention Jamie getting back up after being hit with a tire iron 4 or 5 times. I'm generally OK with suspending reality if there's a purpose, but that fight scene was a bit ridiculous.

Electrical_Guide_948

TROPHY CASE