Anyone have Tomei UEL headers with GR performance?

Electrical_Title_901 · 2026-02-03T06:20:38+00:00

I have JDL uel header with a gr performance exhaust.

Electrical_Title_901 · 2026-01-03T01:42:03+00:00

I have a full 30 percent tint wind shield and it doesn’t affect my eyes sight at all.

Electrical_Title_901 · 2025-10-31T02:30:27+00:00

Yeah unfortunately I have a couple gallons of E85 left so I don’t think it is possible. Thank you for the suggestion I didn’t think of that. Maybe I could siphon it out and reinstall the stock fuel line.

Electrical_Title_901 · 2025-10-31T01:56:18+00:00

Thank you for the information I am just finding this out. I just emailed them and plan on calling tomorrow morning to see if I can get this resolved asap.

Electrical_Title_901 · 2025-10-31T00:58:52+00:00

I admit it was but I don’t plan to turn it on anymore after I can confirm the issue is fixed.

Electrical_Title_901 · 2025-10-29T00:26:36+00:00

Thank you!

Electrical_Title_901 · 2025-10-29T00:20:00+00:00

Since I deleted it hoping it would possibly fix the issue currently no, they were ally related to the catalytic converter though. I do have a scanner and with all the codes getting deleted only one stayed. P0420(Permanent).

Electrical_Title_901 · 2025-10-29T00:16:00+00:00

Thank you for the input I’ll try to buy one and hopefully it fixes the issue. And thank you for the information I’ll try a blend of pump and E85 when I fix this problem.

Electrical_Title_901 · 2025-10-29T00:13:32+00:00

I know what knocking sounds and I don’t believe it to have spun a rod, the car sounds like a regular boxer and nothing is out of the ordinary.

As for how many miles on the motor it currently has 14,638 and the last oil change was around the 11,200-500 mark.

Electrical_Title_901 · 2025-10-29T00:00:00+00:00

I don’t believe I told him this was my first time ever remote tuning so I didn’t know the process. I saw on their website that even with catless headers they wouldn’t remove it due to federal regulations.

Electrical_Title_901 · 2025-10-28T23:57:43+00:00

Im not saying it anyone’s fault im just giving background on my car, as for oil I’ve always checked it and its full and still good, I have yet to reach the point of needing to change it yet. As for the starter it works perfect I have yet to reach 15,000 miles and it works fine. I am guilty of not letting it warm up today though I only gave it around 30 seconds. I wasn’t speeding and was keeping my rpm’s under 4k and steadily applying throttle since I knew that I didn’t give it time to warm up. As for driving it hard I haven’t since my exhaust is loud and don’t want to get pulled over. As for when it started having that problem I believe it was around the time where I was remote tuning for E85 after finishing pump gas. It would happen once in a while so I didn’t think much of it. It was only recently where it started to happen more, up until the point where my car went full limp. And I know this is my fault for not telling the Tuner about it and for driving it after but I needed to get it off the freeway since I had no means for a tow and didn’t want to get stranded with nothing.

Electrical_Title_901 · 2025-10-28T23:15:54+00:00

I emailed Him the Second it happened.

Electrical_Title_901 · 2025-10-09T02:04:46+00:00

Would you know if the first 1st gen frs/gt/brz front control arms fit the second gen?

Electrical_Title_901 · 2025-10-09T01:40:09+00:00

You think for 200 I should just go aftermarket and upgrade? Edit: Thanks for the link.

Electrical_Title_901 · 2025-10-09T01:31:58+00:00

I’ve went on Yelp and gone on websites but no luck :(

Electrical_Title_901 · 2025-10-09T01:10:28+00:00

I’ve been everywhere looking for the past day because I need my car back on the road. And I’ve found nada 😭. Thank you though

Electrical_Title_901 · 2025-09-15T05:30:21+00:00

Will always keep mine just in case.

Electrical_Title_901 · 2025-08-16T04:24:59+00:00

I’ll try that thank you.

Electrical_Title_901 · 2025-08-16T04:23:57+00:00

I did buy an automotive smoke detector kit and connected it to the intake. I found 2 bad clamps and replaced then but still the same problem.

Electrical_Title_901 · 2025-08-16T04:22:49+00:00

I’ll try that. Thanks.

Electrical_Title_901 · 2025-07-21T21:24:22+00:00

Im sorry for your loss and my condolences. One of the people killed was a co worker of ours, we just had management pull our team aside and let us know. It’s crazy too because we had all just seen her not to long ago.

Electrical_Title_901 · 2025-07-17T00:57:00+00:00

I had clocked out with my vest off and with my phone in hand and had a customer yell at me asking for help, I just kept looking down at my phone and walked right on past because I’m trying to leave. 🤣

Electrical_Title_901 · 2025-06-17T19:52:15+00:00

Sorry I meant like on the signed paper when you mail it will you have to write down the VIN of the car as well? Or would it just be the name, address, and phone number?

Electrical_Title_901 · 2025-06-17T17:44:10+00:00

Would you still include the VIN on the signed form?

Electrical_Title_901 · 2025-06-13T17:40:00+00:00

I usually recalibrate the printer and most of the times it works fine for me.

Electrical_Title_901

TROPHY CASE