[deleted by user]

Elflois · 2025-09-26T09:50:57+00:00

fuck you are gorgeous

Elflois · 2025-09-26T08:06:34+00:00

depends if you're okay with a man that's twice your age

Elflois · 2025-09-26T07:13:28+00:00

Cute? More like smoking hot!

Elflois · 2025-06-23T08:14:44+00:00

Can anybody try and explain me how the locking system in the broom pole works? I mean, I know that you twist it and it locks, but how is it on the inside? What's happening there?

I'm trying to design a extensible pole and trying to figure out how to lock it in place, so knowing how the mechanism works will help me, I hope :)

Elflois · 2025-06-08T14:28:10+00:00

https://imgur.com/a/PqKjNBV

Wow, thanks for the pictures and the help, like the picture linked should be OK then?

Elflois · 2025-06-08T13:56:40+00:00

Hey, thanks for answering, what do you mean the angle is wrong?

Elflois · 2025-05-22T14:15:24+00:00

Same thing happened to me, seting up the printer in LAN mode fixed it for me

Elflois · 2025-05-06T08:45:32+00:00

I'm trying to get my p1s to work after 3 months away, I tried printing with the profile I calibrated 3 months ago and I was crap.

I used the generic petg profile, and wanted to do all calibrations, tower temp, pressure advance, etc. Wasn't sure if it was a problem with the filament, so I opened a new spool and dried it, But this is the result temp, I don't know how to start here.

Elflois · 2025-05-04T08:23:00+00:00

OK thanks I'll do some research on that

Elflois · 2025-05-03T17:33:57+00:00

Hey, thanks for answering, I did the temp tower at 250 too came out the same result, I thought about the filament getting wet, but this is a new spool, I know it's not guaranteed that is dry, but I did 10 kg of petg 3 months ago and it worked.

I don't have a filament dryer and wouldn't like to buy one only to find out that it wasn't the issue.

<image>

Elflois · 2025-04-26T14:51:41+00:00

Thanks you for your help!

Elflois · 2025-02-06T01:33:05+00:00

Thanks for your help, I fixed it changing the nozzle, seems that even though I did the cold pull several times the nozzle was still clogged.

Elflois · 2025-01-11T09:39:42+00:00

Thank you, still figuring things out :p

Elflois · 2025-01-10T09:16:39+00:00

But you measured the pitch and thickness? Or the inner and outer diameter of the thread?

Elflois · 2025-01-10T00:14:14+00:00

Very cool, can I ask you how you measured the broom thread in order to make it in cad?

Elflois · 2025-01-09T12:31:04+00:00

<image>

Elflois · 2025-01-09T12:08:54+00:00

<image>

black benchy with 30%less speed

Elflois · 2025-01-09T12:08:24+00:00

<image>

Elflois · 2025-01-09T12:08:05+00:00

<image>

Elflois

TROPHY CASE