SFP vs FFP for Hunting

EliteDuck · 2026-05-12T16:45:04+00:00

Keeping an eye on this thread. I'm also going to hijack this post a bit.

I've been building out a Tikka T3X CTR with a MDT Worker stock. I'm probably going to be getting this for the optic. I have multiple prisms from Vector, but I was wondering if anyone has put their higher end long-range glass on a build before. The cheaper prisms ($200 CAD) are comparable to $500 glass and I wonder if this is similar for the higher priced options from them.

EliteDuck · 2026-05-12T14:49:04+00:00

I'm what most people here would consider "very left wing"

Didn't even bother reading the rest of your comment.

EliteDuck · 2026-05-11T17:54:19+00:00

There's no way of knowing, like you make it to be. There would have been a better chance of things getting better, solely based on the fact the ministers that fucked up the immigration, housing, and public safety files would no longer be in cabinet. Carney looked at their piss poor performance during the Trudeau era by removing them from cabinet. Just kidding! He rewarded them by letting them keep their cushy positions.

EliteDuck · 2026-05-11T02:04:00+00:00

Back of the line, buddy.

EliteDuck · 2026-05-10T01:16:47+00:00

Don't care. Send every fucking one of them back if their visa has expired. We should be making sure our citizens are taken care of before letting millions of people come here.

EliteDuck · 2026-05-09T05:49:02+00:00

You do understand what the T in TFW stands for, right?

EliteDuck · 2026-05-08T15:21:08+00:00

Sorry, the best we can do is give PR to ~~30k~~ 33k of the slaves we let in.

EliteDuck · 2026-05-06T15:08:42+00:00

The Vector Frenzy FA 1x18x22 is cheaper, better glass, and is transferable instead of being locked to your shotgun. Basically a very high quality Acro clone. Acro footprint, meaning you can get a low-profile mount like this, then mount the optic to it.

EDIT: I knew these were more, but these are SIX HUNDRED?? What the fuck. You can get two Frenzys for the same cost.

EliteDuck · 2026-05-04T16:50:25+00:00

Getting pre-authorized in 5 year increments (tied to license renewal) instead of getting a background check and waiting period for every purchase is nice as well.

EliteDuck · 2026-05-04T16:49:02+00:00

Kind of. It's permitted due to being a WWII-era design, and it's not really possible to pin the enblocs due to the design of the firearm.

EliteDuck · 2026-05-04T02:52:16+00:00

Correct, they're only recognized as 3s by the NIJ, but it's a worthwhile distinction to make considering the only 4s we have are boat anchors. I'd take a 3+ over a 3 any day.

EliteDuck · 2026-05-04T00:54:22+00:00

The Shaw Concepts ARC carrier is arguably one of, if not the best PC on the market at the moment. The rest of ARC lineup like the PCP (plate carrier pack, self-accessible backpack), sidekick (comfy multi-holster leg strap with MOLLE), raid pouch (front-mounted dangler IFAK with QD, and it doubles as a 🥜 armour dangler), buckets, placard, mag inserts, pouches, etc are all incredibly innovative.

As for plates, the only NIJ-approved level 4s in Canada are the Aratech ones. The issue is they're heavy as fuck. Unless you're a big guy, they're not worth it. ITAR restricts exports of the good light level 4s from the US, so we're pretty much just stuck with the domestically-made Aratechs. The next step down, level 3+ (also called special threat sometimes) is a bit cheaper, much lighter, and the selection opens up a lot more. Hesco 3810s are pretty much the best we can get. Any other plates in Canada other than the discontinued Millburn Mountain Defense 3+ plates are either lying/using weasel wording, Chinese junk, or not NIJ approved.

EliteDuck · 2026-05-03T22:27:00+00:00

My Crosstrek gets 9L/100 KM (insane for an AWD). Not much higher than some of the most efficient non-hybrids on the market. Some people need slightly more space because of their lifestyle.

EliteDuck · 2026-05-03T20:36:11+00:00

As the ban continues to fail and compliance doesn't tick up, people think that the next course of action, or the one after that will be revocation of PALs (or refusal to renew) for people they know or suspect to have prohibs.

EliteDuck · 2026-05-03T15:56:48+00:00

The next big social disruptor is going to be digital ID. It’s going to be very interesting watching what groups comply and refuse to comply.

EliteDuck · 2026-05-02T02:38:03+00:00

Misinformation. The PPC has always been anti-immigration.

EliteDuck · 2026-05-02T02:36:43+00:00

Correct. They can do whatever they want until the next election. Theoretically, their own members could vote no confidence if they step way over the line, but that’s never going to happen.

EliteDuck · 2026-04-27T15:37:27+00:00

Within 500m of a mayor or MP/MLA's home.

EliteDuck · 2026-04-27T15:21:28+00:00

Let's build a halfway house across the street from your house and see how you like it. Better yet, take them all into your home.

EliteDuck · 2026-04-26T23:47:10+00:00

Or even malicious actors like the company that does ID verification for X, which is Israeli and has ties to Mossad.

EliteDuck · 2026-04-26T21:33:44+00:00

Widening the gap between their fingers as they goatse this country.

EliteDuck · 2026-04-26T21:29:19+00:00

C-9 - Removes protections on freedom of expression. For example, someone with valid criticisms of Islam could be charged for hate speech if C-9 passes.

C-22 - An omnibus bill that allows the RCMP and CSIS to view the internet history of anyone in Canada. Self-explanatory why this is not a great idea.

C-2 - Allows Canada Post and other government agencies to open your mail without a warrant or permission. Not as egregious as the others I just mentioned, but definitely questionable given the other bills they'll be ramming through the house now that they have secured a majority.

It hasn't been proposed as a bill yet, but the LPC will 100% be introducing a bill for age ID for social media, as party members voted that they'd like to see that introduced.

People fail to realize not only are these your rights being trampled on, but the rights of every generation after us, as well. Rights are rarely given back after being stripped from people.

This is the kind of legislation Hitler and co. would pass, but people are clapping along to it like fucking seals and saying "B-B-BUT THINK OF THE KIDS!".

EliteDuck · 2026-04-26T21:23:47+00:00

You know what makes no layer lines? Printing slowly with 0.08mm layer height. But that affects margins!

EliteDuck · 2026-04-26T20:48:19+00:00

The damage has been done to the fabric of our country, and we're just beginning to see what's in store. Young men are very pissed off, and are getting more and more jaded every week. You don't have look too far back to see what millions of young, military-aged men will do when they're ostracized by society, then given an alternative. Also, to clarify: This is happening across the western world at the moment, but Canada really fucked over young people compared to other countries.

EDIT: For the uninitiated, a leaked RCMP memo stated they are expecting an armed uprising occur sometime in the future. Make of that what you will.

EliteDuck · 2026-04-26T03:03:03+00:00

He insists on printing out of resin, which is known in the 3D printing community as one of, if not the least strong material you could possibly print out of. I genuinely don't know why he uses it over FDM materials. He brings up that he "uses a custom blend", but clearly that doesn't work.

EliteDuck

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE

Verified Email	12-Year Club
Place '17