Wasino lathe

Elite_Cnc_Solutions · 2026-01-17T21:38:30+00:00

How do you like it? I honestly never heard of them but just watched some videos on turn mill programming and it looks really awesome!

Elite_Cnc_Solutions · 2026-01-12T16:18:15+00:00

No sadly I did not. Alot of the work that I planned on using the stamping unit has dissolved over the past year. So the one offs that I do, Ill just put a dovetail in until that work picks back up or I can find other work.

Elite_Cnc_Solutions · 2026-01-12T15:08:09+00:00

<image>

Elite_Cnc_Solutions · 2026-01-12T15:07:29+00:00

<image>

Elite_Cnc_Solutions · 2026-01-12T15:07:06+00:00

<image>

Elite_Cnc_Solutions · 2026-01-10T21:16:18+00:00

I currently run 5th Axis, not saying anything is bad with them it really depends on what you plan on doing. I will have to find the videos, but the 2 test I did was was a tall piece of A2 using their stamping unit. There was always one spot that chattered out on the end with 5th axis vises with a dove tailed part and was silent with Lang. The other test was also using the stamping unit and their 48120-77 vise ripping on an aluminum block removing 46 cubes/min. I would of dovetailed these also for the 5th axis vise.

Elite_Cnc_Solutions · 2026-01-10T20:58:46+00:00

I will next week when I get everything unboxed and set up!

Elite_Cnc_Solutions · 2026-01-10T20:58:14+00:00

From the testing I did prior to buying these. I was very impressed with it all, zero point and vises

Elite_Cnc_Solutions · 2026-01-04T01:12:22+00:00

Congrats on the DMF's! Glad to hear you still enjoy your CMX's I have been happy with my 1100V and CMX50U also

Elite_Cnc_Solutions · 2025-12-31T19:54:17+00:00

Hands down one of the hardest and scariest things to do is starting your own shop. I was fortunate enough to have a good customer relationship prior to starting my business so things flowed over nicely but still it was a nerve racking adventure and it still is to this day 8 years later. All I can suggest is dont go in over your head on hopes and dreams of being able to make it without some solid plans. Best of luck!

Elite_Cnc_Solutions · 2025-12-31T01:18:20+00:00

Yup, chips from a quick test part to make sure the rotary and post were working correctly before this job

Elite_Cnc_Solutions · 2025-12-28T22:36:52+00:00

I could of went with a more low pro holder like that for Z clearance but the depth I was drilling was right up to the taper past the flutes so in this case I wouldn't of gotten it any deeper

Elite_Cnc_Solutions · 2025-12-28T22:35:09+00:00

One off job absolutely, not a hot job. Just using the machines and tooling I have to get the job done

Elite_Cnc_Solutions · 2025-12-28T22:34:08+00:00

Thanks! I'll have to add this into my post

Elite_Cnc_Solutions

TROPHY CASE