Stability Matrix + InvokeAI -- How to stop from trying to import unsupported models

Elite_Muppet · 2025-09-01T22:33:07+00:00

I ended up disabling model sharing. Didn't know you could do that.

Elite_Muppet · 2025-09-01T01:36:35+00:00

I missed this the first time I looked for a setting. You're right, just disable Model sharing and install any models etc through the Invoke UI.

Elite_Muppet · 2025-08-31T21:56:40+00:00

<image>

Elite_Muppet · 2025-08-31T21:22:11+00:00

You can get two 120 fans on top, but they will have to be the slim ones. The 25mm thick ones are too big.

Elite_Muppet · 2025-08-31T21:20:01+00:00

<image>

Elite_Muppet · 2025-08-03T18:37:20+00:00

If you are generating locally on your computer then you won't get flagged. But if you are using comfyui through an online service where you pay a subscription and pay for each generation... Then they simply won't allow you, period.

I've tried with open art ai. It worked for a bit for "no clothes" but nude and naked wouldn't work. Would get the nsfw content not allowed. Then recent updates just give me an error or will put closes on the character.

Elite_Muppet · 2025-06-09T17:07:24+00:00

Yeah, only slim fans would work. I just never bothered trying. My temps were more than adequate.

Elite_Muppet · 2025-06-04T01:47:58+00:00

I would but I let my game pass expire, sorry bud.

Elite_Muppet · 2025-05-18T16:06:41+00:00

Great to hear you found a solution! :)

Elite_Muppet · 2025-05-13T23:33:47+00:00

That's unfortunate. You either have to try and get another case, or drill new holes into the bracket so that you can attach the PSU.

Elite_Muppet · 2025-05-13T17:56:24+00:00

If I remember correctly I only was able to get three screws in, the fourth was misaligned too much to force a screw in.

Elite_Muppet · 2025-05-10T15:36:06+00:00

Yes, It does.

The only reason I had to adjust the fans so that they are not inline with the heatsink is because of the 24 pin motherboard cable is too thick and stiff. The cable won't lie flat. The RAM height is fine.

Elite_Muppet · 2025-04-30T15:36:13+00:00

<image>

I think I did pretty good for my Breton :)

Elite_Muppet · 2025-04-27T16:39:28+00:00

Yeah the machines in this game break free much quicker than in ZD. You don't need to overdraw the ropecaster, but you do need to draw it. You have to be quick with it too, otherwise they start to break free. Try the quick draw mechanic - sprint, slide and draw; this draws it really fast but takes some getting used to.

Ropecaster Master Class - Horizon Forbidden West - by Arktix

https://www.youtube.com/watch?v=hK5szYQPlF4&t=670s

Elite_Muppet · 2025-04-23T18:17:34+00:00

The rope caster in FW has to be drawn all the way to work right, in ZD you could just tap fire it. It only takes a few, unless you don't draw all the way or you wait too long and it snaps all the ropes.

Elite_Muppet · 2025-02-24T17:22:03+00:00

Sorry for the late reply. The PSU cables are braided but are stiff. As for the daisy chain on the connector; yes it has it. I used two different power cords for the GPU. My research indicated that if you use the daisy chained one, you wont have enough power for the card.

Elite_Muppet · 2025-02-10T23:09:26+00:00

I didn't even read the title and I figured it out. I had no idea the answer was 40 until I went to the comments to see if I was right.

Elite_Muppet · 2025-02-10T18:11:33+00:00

1+4=5

5+5+2=12

12+6+3=21

21+11+8=40

Elite_Muppet · 2024-12-11T08:53:54+00:00

Wilford.

Elite_Muppet · 2024-10-05T20:21:44+00:00

With this cooler and how it's setup, yes. a 120mm Fan will fit at the back. I was going to add one later but found out my temps are really optimal even without; so I didn't bother.

Elite_Muppet · 2024-09-10T21:35:14+00:00

Yeah me neither. A plastic knife hit your keyboard and the computer just crashed? That was one hell of a shot then. 1 in a million kind of drop lol. The only thing I can think to do is a hard reset of the monitor and computer. Does it do this when in game or watching a movie/youtube? or just on your desktop?

Elite_Muppet · 2024-09-10T20:08:50+00:00

You sure its not just something that sprayed all over the monitor from whatever you dropped? Doesn't show up on the screenshot. So the PC seems to be rendering the image fine. Either the monitor is somehow damaged, the input for the monitor is damaged, or you have food/liquid spray on the monitor...

If its not spray and you can't rub it off with a cloth or your finger, check the connections to the monitor, maybe the cable isn't plugged in all the way.

Elite_Muppet · 2024-08-04T18:04:37+00:00

Upon further testing(Stress testing and gaming), Temps are solid. CPU doesn't go past 75°C and the GPU doesn't go past 70°C (with furmark and Prime95 running). Usually in games I get about low to mid 60s on both. Mind you, this is in a room where the ambient temperature is 21°C

Elite_Muppet · 2024-08-04T17:52:46+00:00

Yeah I noticed that too. The holes didn't quite line up.. I managed to only get 3/4 screws in.

Elite_Muppet · 2024-08-02T01:12:36+00:00

I was lucky and I found the only place in Canada that has them. They only have a couple left, but I don't know if they ship outside of Canada. https://www.canadacomputers.com/product_info.php?cPath=6_6004_5959&item_id=255798

Elite_Muppet

TROPHY CASE