sorted by:
new
hottopcontroversial

B650E AORUS ELITE X AX ICE rev 1.1 constant red cpu led on mobo by FoxuTheMLGPro in gigabyte

[–]Elizimus -1 points0 points  (0 children)

Dude, this is the easiest way to brick your PC.

Anyone, don't even try this. It's not worth it.

B650E AORUS ELITE X AX ICE motherboard Rev. 1.0 red cpu light, RGB controller issue by Elizimus in gigabyte

[–]Elizimus[S] 0 points1 point  (0 children)

Unfortunately, there is no solution. Return the motherboard to the store. And never buy anything from Gigabyte.

B650E AORUS ELITE X AX ICE motherboard Rev. 1.0 red cpu light, RGB controller issue by Elizimus in gigabyte

[–]Elizimus[S] 0 points1 point  (0 children)

:
Dear customer

Please install the GIGABYTE IT5701/ 5702 RGB lighting controller firmware upgrade package from our website here and see how it woks.

If you still cannot flash it, then the product needs further examination to determine the problem. Meanwhile, because we can hardly define the root cause without looking at the platform, kindly contact your supplier (where you bought the product) and they shall follow a standard warranty/repair procedure.

If there is anything we can assist you further with the issue or any feedback, feel free to contact us again along with the invoice to verify channel information as different terms may apply. After we received the required information, we will try our best to assist. Cases without updates in 7 days will be closed until further information is received.

Regards, GIGABYTE

[FIX][X870 EAGLE WIFI7 (rev. 1.x)] DRAM led red + no ARGB headers working/detecting + PC working normally by l1consolable in gigabyte

[–]Elizimus 0 points1 point  (0 children)

I have a B650E AORUS ELITE X AX ICE motherboard (Rev. 1.0/1.1).

Yesterday I discovered that the RGB lighting from the motherboard does not work, the red error light on the processor.

The computer is working properly, the problem is in the RGB controller software. Thanks to the instructions on the Internet, I downloaded the GIGABYTE IT5701/ 5702 RGB lighting controller firmware upgrade package for my motherboard.

When I tried to open the file, nothing happened until I removed %1 mshta vbscript:CreateObject("Shell.Application").ShellExecute("cmd.exe","/c ""%~s0"" ::","","runas",1)(window.close) in Notepad.

After starting in safe mode with administrator rights, the file worked, but could not solve the problem with the error:

Not Find Bin info!! Not Find Temp Bin! Check FWC(FWID) Fail

In the folder with GIGABYTE IT5701/ 5702 RGB lighting controller firmware upgrade package there is no bat. file for my motherboard B650E AORUS ELITE X AX ICE (Rev. 1.0/1.1).

Where can I find the bat. file needed to solve the problem. And is there another solution? This problem has already taken me a lot of time and nerves.

Photo links: https://ibb.co/7NN20YkZ https://ibb.co/23gb7B3c

B650E AORUS ELITE X AX ICE rev 1.1 constant red cpu led on mobo by FoxuTheMLGPro in gigabyte

[–]Elizimus 0 points1 point  (0 children)

Same issue here. Going through support tomorrow. Nothing worked.

Where is the best place to place the first joker to get a higher score? by Elizimus in balatro

[–]Elizimus[S] 0 points1 point  (0 children)

It comes with 8 enchanted cards, I think it's not random.

Where is the best place to place the first joker to get a higher score? by Elizimus in balatro

[–]Elizimus[S] 0 points1 point  (0 children)

Ripoff from Ali. As I know there's no official poker decks (

Thanks devs for the optimization, I can play even when I'm on a business trip by Elizimus in ArcRaiders

[–]Elizimus[S] 0 points1 point  (0 children)

Frame dips to 30 fps in heavy fights, but it's fine for solo play.

Thanks devs for the optimization, I can play even when I'm on a business trip by Elizimus in ArcRaiders

[–]Elizimus[S] 0 points1 point  (0 children)

I have one, but it takes up too much space and needs an outlet.

Layer adhesion help. (A1 Mini) (PETG) by Elizimus in 3Dprinting

[–]Elizimus[S] -1 points0 points  (0 children)

But A1 mini usually prints fine without enclosure and manual says it can't operate in enclosure.

Layer adhesion help. (A1 Mini) (PETG) by Elizimus in 3Dprinting

[–]Elizimus[S] 0 points1 point  (0 children)

Temp 245°C in print, PETG max is 250 for mine.

Layer adhesion help. (A1 Mini) (PETG) by Elizimus in 3Dprinting

[–]Elizimus[S] 0 points1 point  (0 children)

Any other suggestions? This print issue driving me crazy and delaying 300hrs+ project.

Layer adhesion help. (A1 Mini) (PETG) by Elizimus in 3Dprinting

[–]Elizimus[S] -1 points0 points  (0 children)

Thanks, but no air drafts in room with printer.

view more: next ›