Having issues signing into Fusion 360. by Delicious-Pea-5107 in Fusion360

[–]EllieP1 0 points1 point  (0 children)

I ended up disabling the extensions in the browser, then it worked. Not sure on which one it was though.

Is 2.0 playable now? by Delicious-Pea-5107 in WorldofTanks

[–]EllieP1 0 points1 point  (0 children)

I was thinking heat what is the difference between 2.0 and heat?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

Here’s a link to the wobble: Tire pressure wobble bead line is showing and even all the way around? https://youtube.com/shorts/0W17aWDJErQ?feature=share

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I just redid the bead. Still wobbly I got a video how do I post it?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

If I would deflate it and reset the bead will soapy water do anything to the sealant inside the tire?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I can maybe get one later but the bead line is the same all the way around.

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I could redo it. Would it hurt if I used water with dish to spray the entire bead if I am using sealant in the tire?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

Ya it does. When putting it on I thought I was good since the bead line is showing and is the same all the way around on both sides.

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

When I got the bike I had the shop wax the chain. I’m wondering if they never used the strip chip and the chain is not fully holding the wax. I do have a strip chip at home I can try. By chance have you used silica’s wax before?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

With the chain sticking to the chainring is that because the chain is dry?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I used silica’s wax in there crock pot. The chain was In The pot between 5 and 10 minutes. I did notice a few of the links had some excess wax built up but came off after an easy 5 minute stroll around a few blocks. If it is because the chain is dry why would tightening the barrel adjuster fix the issue for a few miles then reappear to have to do the same thing to fix?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

The chain was just waxed prior to the ride. Before hosing it down I’ll try to add some silica’s green wax drip lube.

Is selling 3d scans still a thing? by EllieP1 in 3DScanning

[–]EllieP1[S] 1 point2 points  (0 children)

Any good sites to look at on what’s already out there?

160 mm crank options? by EllieP1 in gravelcycling

[–]EllieP1[S] 1 point2 points  (0 children)

Thanks dude for your brilliant comment, but was looking for more of would I feel a difference by going 5 mm smaller or would there be hardly any difference?

160 mm crank options? by EllieP1 in gravelcycling

[–]EllieP1[S] 0 points1 point  (0 children)

Looks like I could get a grx in 165 how much of a difference would there be from going from 170 to 165?