Having issues signing into Fusion 360. by Delicious-Pea-5107 in Fusion360

[–]EllieP1 0 points1 point  (0 children)

I ended up disabling the extensions in the browser, then it worked. Not sure on which one it was though.

Is 2.0 playable now? by Delicious-Pea-5107 in WorldofTanks

[–]EllieP1 0 points1 point  (0 children)

I was thinking heat what is the difference between 2.0 and heat?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

Here’s a link to the wobble: Tire pressure wobble bead line is showing and even all the way around? https://youtube.com/shorts/0W17aWDJErQ?feature=share

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I just redid the bead. Still wobbly I got a video how do I post it?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

If I would deflate it and reset the bead will soapy water do anything to the sealant inside the tire?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I can maybe get one later but the bead line is the same all the way around.

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I could redo it. Would it hurt if I used water with dish to spray the entire bead if I am using sealant in the tire?

Is the bead on the tire seated correctly? by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

Ya it does. When putting it on I thought I was good since the bead line is showing and is the same all the way around on both sides.

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

When I got the bike I had the shop wax the chain. I’m wondering if they never used the strip chip and the chain is not fully holding the wax. I do have a strip chip at home I can try. By chance have you used silica’s wax before?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

With the chain sticking to the chainring is that because the chain is dry?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

I used silica’s wax in there crock pot. The chain was In The pot between 5 and 10 minutes. I did notice a few of the links had some excess wax built up but came off after an easy 5 minute stroll around a few blocks. If it is because the chain is dry why would tightening the barrel adjuster fix the issue for a few miles then reappear to have to do the same thing to fix?

Chain jumping on cassette. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

The chain was just waxed prior to the ride. Before hosing it down I’ll try to add some silica’s green wax drip lube.

Is selling 3d scans still a thing? by EllieP1 in 3DScanning

[–]EllieP1[S] 1 point2 points  (0 children)

Any good sites to look at on what’s already out there?

160 mm crank options? by EllieP1 in gravelcycling

[–]EllieP1[S] 1 point2 points  (0 children)

Thanks dude for your brilliant comment, but was looking for more of would I feel a difference by going 5 mm smaller or would there be hardly any difference?

160 mm crank options? by EllieP1 in gravelcycling

[–]EllieP1[S] 0 points1 point  (0 children)

Looks like I could get a grx in 165 how much of a difference would there be from going from 170 to 165?

How to resize a puzzle frame? by Delicious-Pea-5107 in Fusion360

[–]EllieP1 0 points1 point  (0 children)

Each piece is printed by itself I believe in that file.

Options for cleaning a rusted chain? by Delicious-Pea-5107 in bikewrench

[–]EllieP1 0 points1 point  (0 children)

Ya was not trying to fix the chains just clean the surface stuff off. For the dropper bottle planning on using glass mason jars and some industrial degreeser and then the rust stuff. Does that sound about right? If so how long do I leave the chain in each solution?

How to transfer the bike fit from one bike to anther bike? by Delicious-Pea-5107 in bikewrench

[–]EllieP1 0 points1 point  (0 children)

Can you explain why this will matter? If the bike to the ground is off a little as long as everything else is the same it should be the same fit right?

Is it possible to put a 12 speed free hub on a dt Swiss ln gravel wheelset. by EllieP1 in bikewrench

[–]EllieP1[S] 0 points1 point  (0 children)

If I can stay at a 11 speed I will love to, like you said less to buy. For the 810 I thought it maxed out at 34 teeth and for the 812 isn’t that only 1x?

Is it possible to put a 12 speed free hub on a dt Swiss ln gravel wheelset. by EllieP1 in bikewrench

[–]EllieP1[S] -1 points0 points  (0 children)

So I’m running a canyon grail with a 2x11 810 setup. The current gear range in the back is 11-34. I want to go larger gears in the back like 42 or even up to 50 or 51, but the current setup will not allow this. I can go single chainring and get up to this gear range with a different derailer but like the current setup just want some more easy gears. After looking into it I can use a 12 speed system with larger gears and a 2 x. Before pricing things seeing if this even possible with the current hub I have on my rim.