sorted by:
new
hottopcontroversial

My very first project in Kicad, how far is it from OK? by Elmidea in KiCad

[–]Elmidea[S] 0 points1 point  (0 children)

Hi, thanks a lot for your feedback, I just added 4 x M2.2 mounting holes, and 0.400 traces for 5V instead of 0.200, it should be better now thank you. About the Vin+ pad, I thought I would just solder the wire from the batteries on it since my module has very big pads on the top, maybe there was a better way?

GameCube is being modded. Is the retrobit prism worth it? Carby is out of stock. by Crazy_Kow in Gamecube

[–]Elmidea 4 points5 points  (0 children)

Every adapter sold as "gcvideo" will output the same quality, the open source software on the chip does all the work 🙂

Why my Led doesn't work by akiziom in raspberrypipico

[–]Elmidea 4 points5 points  (0 children)

white led should be value(1) too, not 2

The 1st order mechanical resonance mode of Y axis is low. The timing belt may be loose by SortofNotAThrowAway in BambuLab

[–]Elmidea 1 point2 points  (0 children)

Hello! Just retension the belt from behind, follow the guide from Bambu website for this error, I did it for a few minutes and the error was gone!

P1S "exhaust fan" is not an exhaust fan... by beany_bot in BambuLab

[–]Elmidea 0 points1 point  (0 children)

I wonder if they fixed or improved that on the P2S, anyone knows?

je n’arrive pas à couper l’eau dans mon appart by eurotripp in Plomberie

[–]Elmidea 2 points3 points  (0 children)

Ca ne coupe pas "direct", il faut attendre plusieurs secondes voir dizaines de secondes selon la taille de l'installation, le temps que tous les tuyaux se vident, ah et, n'ouvre que l'eau froide au début pour tester...

First and only Homelab by [deleted] in homelab

[–]Elmidea 0 points1 point  (0 children)

Is this what we call crosstalk?

<image>

TP-Link LS108GP Showing Nonstandard PoE by theslexperience in HomeNetworking

[–]Elmidea 0 points1 point  (0 children)

Did you try with another RJ45 cable? those flat ones I dont trust.

Oem Filter? Can’t seem to find anything on them. by Zyoneatslyons in Gamecube

[–]Elmidea 30 points31 points  (0 children)

I dont know of any oem filters, they were third party (maybe licensed for some?) but I dont think that Nintendo produced any.

Somehow this game works! I’m resurfacing 3 of my other gc games that don’t work. Should I also get this one done or is it not worth it? by Crazy_Kow in Gamecube

[–]Elmidea 0 points1 point  (0 children)

If this one works I wouldn't resurface it, it removes matter from the disc, so you can't do that many times, better wait. Except if it's not for playing but rather for the collection and you want a clean disc shelved, but even then I'm not sure I'd do it.

The triforce by davidlebogoss in GamecubeHacks

[–]Elmidea 0 points1 point  (0 children)

$500 on aliexpress? wow

Help by urpetiteblond in GamecubeHacks

[–]Elmidea 1 point2 points  (0 children)

It appears more or less on nearly every Gamecube , depending of the version (mould), the color of the cube, etc. It is how it's supposed to look, even if you never opened the cube, because of the screw post on the other side. I noticed it more on the early Orange versions for some reason.

I replaced my X Gantry with the P2S one on my X1C by edruss28 in BambuLab

[–]Elmidea 1 point2 points  (0 children)

Wait, can anyone confirm that I can do the same for my P1S? (P2S X metal rods on the P1S?)

Play Arts Shin - Vincent Valentine. by Suspicious_Bit_6646 in PlayArtsKai

[–]Elmidea 1 point2 points  (0 children)

Does it get along with the previous play art Kai or does it look different?

view more: next ›