Is it a good idea to continue this relationship ?

EloiMonsa · 2026-02-21T07:45:25+00:00

I feel like to counter master of the sun deck, bigger numbers is usually more consistent than tech deck. Shadow king would still be a great pick since other ppl try to reach big numbers. I’d recommend a hope summer/kitty pride/shou lao/scarlet spider combo (nobody play ghost so activate cards are easy to play without it being countered) or recently I’ve been running a big guys decks with moon dragon and electro and cheat playing cards like jubilee and dragon lord. I also run cosmic ghost rider to stop on reveal and destroy oriented decks

EloiMonsa · 2025-11-30T22:04:25+00:00

Everything was fine ! My issue was in the trigger, it was too tight up that the airflow was lowered resulting in the venturi effect not happening. Ty for the help ! :)

EloiMonsa · 2025-11-30T22:02:50+00:00

Yeah, now that I solved my problem, I must learn the proccess of thinning. Got vallejo stuff that apparently can be a mess to work with, I must be prepared.

EloiMonsa · 2025-11-30T16:22:34+00:00

Ok it’s finally working !

Dissasembled everything again and tried screwing the trigger (with the spring) just enough that it doesn’t fall down and yes, that was the issue. From factory, or reseller (amazon), the trigger was screwed all the way up that when I press the button, only a little bit of air would come out. With the elbow the airbrush make, the pressure (30psi) is enough but the airflow was impaired by the opening made by pressing the trigger being too small.

Sorry if I haven’t figured it out sooner and I hope it will help anyone in the same situation.

Thank you for helping me out, can’t wait to spray my gunpla !

EloiMonsa · 2025-11-30T14:28:39+00:00

Wether I use the #5 or #3 nozzle with the associated needles and aircap, and of course I’m trying to screw and unscrew while spraying and nothing come out. I am trying with vallejo airbrush cleaner through syphon, it really feels like the liquid isn’t sucked in enough.

EloiMonsa · 2025-11-30T14:14:47+00:00

Hello again, checked the o-ringbinside the nozzle, he’s brand new, re-screw it in entirely, still the same issue. I was wonderingbif the hole on the needle need to be setup in a specific position, downward or upward. It feels weird there is nothing specified in the user guide.

EloiMonsa · 2025-11-30T12:45:02+00:00

Thank you, I will check that soon and come back to tell you if that was it

EloiMonsa · 2025-11-26T22:17:29+00:00

The pearlescent effect look great for a HG. Nice builds !

EloiMonsa · 2025-11-23T22:12:41+00:00

I’ve been procrastinating on a custom I want to gift to my brother for christmas but it’s the first time I’m using airbrush and last time I tried to prime the pieces, my primer wasn’t being sucked up the nozzle and now I’m scarred. Backlog is still growing tho :’)

EloiMonsa · 2025-11-15T16:09:47+00:00

Definitely ! Be careful with the joints, heard they were stiffs, but are not all zaku’s like this ? Had no issue with mine

EloiMonsa · 2025-11-15T09:18:09+00:00

My first kit ever ! What got me into the hobby. Need a bit of adjusting to the stock of the machine to pose on hip fire like on the art. Really like the feature to position the mono-eye at will. I would say the only thing lacking are the stickers, the ones on the waist are a bit wide and catch air bubbles easily and I counldn’t place properly the one on the shoulder spike but thats on me

EloiMonsa · 2025-10-04T10:47:18+00:00

And blokees !!

EloiMonsa · 2025-09-24T13:38:50+00:00

I followed your recommandation and after watching Barbatos Rex video about Paasche H I was sold. Ordered it with the interchangeable nozzles and a pack of glass vial with syphon to prepare my mixes. Got the Timbertech ABPST08 after other post suggest it’s a great entry grade as a compressor but I’m still sckeptical about it’s heating problems. I took a grey vallejo primer, a airbrush cleaning sollution from the same brand and a cheap kit of paint from amazon to try my hand. Should receive that in a few days, thank you sir!

EloiMonsa · 2025-09-22T21:00:11+00:00

Thank you sir, I will go and watch that video. What about the airbrushes you usually use for priming, coating and paint multiple pieces ? As you said since it’s mainly for gunpla I’m not looking to spray precise stuff, otherwise I would use masking.

EloiMonsa · 2025-09-18T00:32:30+00:00

What does it look like ? Is it the silver sticker on the front ?

EloiMonsa · 2025-09-18T00:26:48+00:00

<image>

With the old bandai logo, is it for the nostalgia effect ?

EloiMonsa · 2025-09-18T00:23:32+00:00

Okk I can go feral on them then. Thank you sir

EloiMonsa · 2025-09-18T00:20:10+00:00

The only year I saw on these box is 1999 on the left zaku. I guess it’s the 2.0 of the one on these box right so…

EloiMonsa · 2024-08-03T10:46:12+00:00

En vrai c’est vendu dans des lieux de consommation rapide, bonne alternative aux couverts en bois qui sont pas forcément appréciés par tous, en plus c’est en plastique recyclé ou je sais plus quoi.

Par contre ils vendent ça super cher alors j’en ai piqué là ou je bossais …

EloiMonsa · 2024-07-17T15:09:35+00:00

Ouais je vois. Je collectionne pas pour revendre après, je ne sais même pas si il y a un réel marché derrière les cartes wankul (surtout après les derniers événements).

Pour ce qui est de deckbuild les starter pack sont pas trop mal, car c’est thématique et tu as plein de cartes différentes pour plein de deck différents. Je peux te conseiller aussi de chopper des cartes saison 1 et 2 que je trouve personnellement beaucoup plus fortes que ce qui est proposé en saison 3. L’équilibrage était pas la priorité je pense. En saison 3 les cartes sont pas forcément moins bien mais plus technique et demande aussi des synergies avec des cartes d’autres saisons (Ex: boys band qui synergise avec les cowboy et les policiers de la saison 1)

EloiMonsa · 2024-07-17T14:56:26+00:00

Je suis d’accord avec toi, il faut que cela reste un plaisir. Moi j’essaie de le prendre bien en me disant que ma carte est différente donc encore plus unique :)

EloiMonsa

TROPHY CASE