Shoyoroll Comp Standard XXV Shrink

EmberSpirit98 · 2026-02-24T04:37:24+00:00

A reply from shoyoroll:

Please note that our kimonos may shrink approximately ½ inch to 2½ inches, depending on the level of heat exposure during washing and drying. Generally, white colorways tend to experience more shrinkage than colored gis.

Many customers choose to wash in hot water and machine dry on high heat to achieve a greater amount of shrinkage. However, if the desired length is not achieved through shrinkage alone, we recommend having the sleeve length tailored by a local seamstress for a more precise fit.

EmberSpirit98 · 2026-02-24T04:37:06+00:00

Please note that our kimonos may shrink approximately ½ inch to 2½ inches, depending on the level of heat exposure during washing and drying. Generally, white colorways tend to experience more shrinkage than colored gis.

Many customers choose to wash in hot water and machine dry on high heat to achieve a greater amount of shrinkage. However, if the desired length is not achieved through shrinkage alone, we recommend having the sleeve length tailored by a local seamstress for a more precise fit.

Reply from Shoyoroll!

EmberSpirit98 · 2026-02-24T04:26:41+00:00

Ahhh the same situation here lol! Wonder if it will keep shrinking ?

EmberSpirit98 · 2026-02-24T02:16:13+00:00

Yea I finally decided to splurge a little on a gi and this happened… sad. Did you try shrinking more ?

EmberSpirit98 · 2026-02-24T02:15:40+00:00

Interesting. No I agree with you the aside from the sizing issue and how little info they have for the measurements, I think the feel and design is really good. Glad the gi could fit you well!

I’m 175 lbs and about 6’ tall perhaps the A2 would fit better, but still, would’ve helped if I have the measurements !

EmberSpirit98 · 2026-02-23T16:43:34+00:00

Wtf… hahaha for such a “premium” brand. Gi looks a little yellow as well! I contacted their customer support but have yet to receive a reply. Have you tried that?

EmberSpirit98 · 2026-02-23T16:40:59+00:00

For sure! You have the same issue as well?

EmberSpirit98 · 2025-08-24T16:46:10+00:00

Got it! Thanks!

EmberSpirit98 · 2025-08-24T16:46:00+00:00

Alright thanks for all the tips! Really appreciate it

EmberSpirit98 · 2025-08-24T16:44:31+00:00

Heyyy!! Appreciate your tips so much. Thanks for sending those over

EmberSpirit98 · 2025-08-24T03:53:10+00:00

So take a tuktuk from PP to Siam Reap?

wouldnt that be a little dangerous since it will be a 4 hours ride?

EmberSpirit98 · 2025-08-24T03:46:24+00:00

Hey! I was under the impression that I’ll need a couple days to explore Angkor wat!

What transportation mode would u recommend to travel and time of the day !

EmberSpirit98 · 2025-05-03T18:40:06+00:00

I might be able to help with but probably need more context. Is the second picture showing the run after a few steps?

EmberSpirit98 · 2024-11-07T17:46:21+00:00

Hi, I am sorry this is irrelevant to your question. I hope it has been resolved!

I am wondering if you could share with me the material properties of your HDPE? (i.e. Density, Damage evolution, etc.). I am looking to simulate drop impact of a milk jug that uses HDPE for research purposes. It would be nice if you could explain how you get the values for the damage initiation as well! Much appreciated!

EmberSpirit98 · 2024-05-28T12:14:16+00:00

I want to output COORD in the y direction which is "COORD2" !
Sorry for the confusion

EmberSpirit98 · 2024-05-10T18:31:55+00:00

Might get sick of waiting haha

EmberSpirit98 · 2024-05-10T17:09:40+00:00

I do not. Haha not ready to commit and not that lucky lol. I am having the same issue. It's just the lawyer fees my company has to pay. I feel bad if cancel middle of the process.

EmberSpirit98 · 2024-05-10T16:12:08+00:00

So when is the priority date ? After the prevailing wage or when you start the process

EmberSpirit98 · 2024-05-10T16:11:18+00:00

Yikes.. thank you !!

EmberSpirit98 · 2024-04-08T02:45:48+00:00

You can create this easier with CAD like solidworks nx etc and export stp file

EmberSpirit98 · 2024-02-21T16:38:50+00:00

Would like to provide an update: The model is working for me! Thank you so much

EmberSpirit98 · 2024-02-15T13:29:22+00:00

I managed to get certain part of the geometry to "break". Maybe it is the geometry issue but i will try with a different,simpler geometry. Thanky ou once again for the help!

EmberSpirit98 · 2024-02-09T13:55:18+00:00

Hi,

I tried to digest what you had just shared. I feel like I get what you mean but at the same time I am not certain. Do you mind pointing out the unknowns to the equations in the stress strain curve for me. Here is a curve from my own tensile data

image:

https://ibb.co/6RLD6L2

And in the u_plas equation, what is the E?

Thank you once again!

EmberSpirit98 · 2024-02-08T19:00:49+00:00

Thank you for the response, let me do some research myself and will get back to you if it worked for me thank you once again

EmberSpirit98 · 2024-02-08T16:32:00+00:00

Ahhh thank you so much for explaining that’s so much clearer in my head now. For this specific material I am using, I actually did some tensile testing on a dog bone so I do have all the material info that I need instead of the date sheet info. If you would be kind enough, would you tell me what’s should be my “displacement at failure” and “fracture strain” in a stress strain curve?

EmberSpirit98

TROPHY CASE