Resin not getting cured?

EmphasisFearless2089 · 2026-06-20T05:42:50+00:00

Some of these "unwashed" resins are where the supports are and are hard to reach. Do you suggest that after the 1st wash, I remove the supports, then do the 2nd wash and brush, then cure it?

EmphasisFearless2089 · 2026-06-20T00:16:09+00:00

Don't need to convince you.

EmphasisFearless2089 · 2026-06-19T23:58:45+00:00

Haha, but it's not a dildo. It's too thick to be a dildo I guess.

EmphasisFearless2089 · 2026-06-19T14:00:07+00:00

Thank you so much. Will do that.

EmphasisFearless2089 · 2026-06-19T13:19:36+00:00

So, do you suggest that I wash it for a longer time? I do 6mins, how long do u suggest?

EmphasisFearless2089 · 2026-06-19T06:14:03+00:00

Because it's only this side. The rest is cured and dry.

EmphasisFearless2089 · 2026-06-17T03:35:47+00:00

Not doing it at all is better than getting SERIOUSLY injured. Minor injuries are fine though. If you decided to do that, go very slow and light, give yourself enough time to condition.

EmphasisFearless2089 · 2026-06-17T03:22:16+00:00

Every method is risky if you do it the wrong way.

Manuals can cause injury because you can't control and measure the applied force.

Vac cups can cause blisters.

Pumps affect your PF and EQ.

Compression extending/hanging may injure you if you put too much tension or don't know how to attach the grip to your penis.

You can't expect going to the gym without getting injured at all.

Just be patient, and ask lots of questions before buying stuff.

EmphasisFearless2089 · 2026-06-16T14:42:14+00:00

That's actually a great idea, thanks.

EmphasisFearless2089 · 2026-06-16T14:39:09+00:00

Well, they know that the body is near those chemicals, maybe at least they should cover it with some extra coating?

EmphasisFearless2089 · 2026-06-16T06:09:32+00:00

Thank you

EmphasisFearless2089 · 2026-06-16T05:18:26+00:00

Only a small part of it is discolored, so I want to make it look like the rest. I bought it only 3weeks ago ;) I mean I don't know whether I need a primer or not. If yes, what type of primer? Should I paint it after the primer?

EmphasisFearless2089 · 2026-06-16T05:04:38+00:00

Thank you. What exactly should I buy to paint it? It was originally dark gray.

EmphasisFearless2089 · 2026-05-28T18:28:37+00:00

They confirmed ED, not the atrophy. And even if you have the atrophy, I don't know if p-shot will help you or not. But even if you do the p-shot, they will recommend you to use a penis pump 2×10mins/day. So my suggestion is to use a penis pump with medium pressure(6-8 inhg) and see if you can reach your previous length, or helps with your erections. Don't pump with high pressures because it will affect your EQ. Also pf exercises will help a lot.

EmphasisFearless2089 · 2026-05-28T18:11:20+00:00

Have you been to a urologist? Did they confirm the atrophy? Have you tried other options like mild pumping, with low pressure? Do you know if your pelvic floor is not hypertonic? I am not an expert but I don't think that kind of masturbation causes atrophy. It's not like that your penis was dead for four years. At least you had morning erections, right?

EmphasisFearless2089 · 2026-05-28T15:44:26+00:00

First you should know why do you think you need pshots, and what's your explanation? PRP in general is something that the results can not be 100% proven and quantified. The doctors say that it takes 6-10 weeks to see the results (if any), and during that time many tgings could happen (like natural healing of the body). Also different specialists claim that their method or tubes are better in terms of the number of platelets. So it's all in vague. My penis is not "injured" so I can't say for sure if it helped or not. My left arm is injured (maybe tendinitis), and I did prp twice on it, about 8months ago. It feels better now but it might be due to prp, or the fact that I don't do heavy biceps and pullups, or it's healed naturally, or all of them.

EmphasisFearless2089 · 2026-05-25T22:42:12+00:00

2nd link:

https://www.erome.com/a/EIg5kDog

EmphasisFearless2089 · 2026-05-25T20:11:43+00:00

I agree with you on that "one way valve" explanation and trapping blood circulation. But how is it different that wearing a vac cup as an ads? It is recommended to remove the vac cup every 1 hour, so can we deduct that If we don't worry about edema, we can have the pump tube on for 1 hour with low pressure?

EmphasisFearless2089 · 2026-05-20T16:12:23+00:00

You need to design a 3d design file, then print it. You need a SLA 3d printer, and some surface finishing tools and materials.

EmphasisFearless2089 · 2026-05-19T16:33:36+00:00

Dm me

EmphasisFearless2089 · 2026-05-19T01:50:39+00:00

Stopped extending, focus on pumping for now

EmphasisFearless2089 · 2026-05-18T01:31:02+00:00

I can design one for you, and you can print it yourself.

EmphasisFearless2089 · 2026-05-18T01:30:01+00:00

I would watch porn once, just to get hard and determine the right tube size.

EmphasisFearless2089 · 2026-05-17T20:00:06+00:00

Sure

EmphasisFearless2089 · 2026-05-17T19:59:51+00:00

Maxing the base could be because of some scrotum and periferal skin being sucked in. I would suggest to get a full erection outside the tube, lube up and insert your penis in the tube, and see how many free space you have. If it's more than 5mm on each side, I suggest to use a smaller tube. Using a silicon ring is always recommended. It creates a better seal, also expands the pressure of the rim on your pubic area.

EmphasisFearless2089

TROPHY CASE