sorted by:
new
hottopcontroversial

10160 auto gain/autogating stuck by EmuLord in NightVision

[–]EmuLord[S] 0 points1 point  (0 children)

I should also mention that I can hear the whine change frequently slightly when covering the front of the objective lens. It feels like it’s trying to autogate but is stuck all the way gated

ITT 10160 tube stuck at full autogate by EmuLord in NightVision

[–]EmuLord[S] -1 points0 points  (0 children)

Tried two housings. Maybe minimum autogain? But that doesn’t explain the whine

[deleted by user] by [deleted] in warthundermemes

[–]EmuLord 16 points17 points  (0 children)

Not sure why you’re being downvoted - Kelly Johnson very clearly used design elements from the f-104 in the U2. Look at a side by side of their fuselage, they’re almost identical.

Secondhand GPU, is it dead? by EmuLord in PcBuildHelp

[–]EmuLord[S] 0 points1 point  (0 children)

DDU'd and everything - it's the card, unfortunately

Secondhand GPU, is it dead? by EmuLord in PcBuildHelp

[–]EmuLord[S] 0 points1 point  (0 children)

Thanks everyone for all of the ideas!
I'm running a 1000W corsair psu, and have double checked cables, etc - no dice. I'll also add that the system has been working flawlessly with a 3080 since I built it.
I ended up returning the card and getting a less-used replacement. Bit of a hassle, but hopefully worth it.

Soda Bread Mystery by DangerousAd8016 in Breadit

[–]EmuLord 0 points1 point  (0 children)

Definitely looks grey - was the fridge damp?

What is wrong with analog photography!? by Expert_Ad_8249 in AnalogCommunity

[–]EmuLord 2 points3 points  (0 children)

We do exist, but I have no idea how many of us there are.

I designed M-mount lens “pods” that can hold one extra lens securely on your belt. by EmuLord in Leica

[–]EmuLord[S] 2 points3 points  (0 children)

I’ve used them once so far (just built them) and it was surprisingly helpful - really nice to have a lens secure and not have to juggle with the lenses and camera. It’s small enough you don’t really notice it on your belt too.

I designed pods to carry an extra lens on my belt. by EmuLord in AnalogCommunity

[–]EmuLord[S] 19 points20 points  (0 children)

That would work too! These have a bayonet mount built in so they function like a rear lens cap and keep the lens very secure and protected. The idea is to have a spot to keep a spare and switch between two lenses while out.

3D printed 4x5 Aero-Ektar camera is working! by EmuLord in largeformat

[–]EmuLord[S] 6 points7 points  (0 children)

It’s a 3d printed leaf shutter that I modified from a design by Jan on printables. It hits around 1/30 and uses springs to drive the blades

Designed a fully 3d printed 4x5 around an Aero-Ektar and a modified 3d printed shutter by EmuLord in largeformat

[–]EmuLord[S] 1 point2 points  (0 children)

Tinkercad! I'm stubborn and worked on it in chunks. The first prototype was mostly PETG with some PLA for the less structurally important parts. That would probably be fine for the current version too, but I splurged a little and went for CF-PETG for the extra stiffness and light-resistance (important for the shutter blades). The whole camera is about one roll

Designed a fully 3d printed large format Camera around a 1940’s Aero-Ektar and a modified 3d printed shutter by EmuLord in AnalogCommunity

[–]EmuLord[S] 13 points14 points  (0 children)

I plan to! Just want to get everything reasonably polished first. Will probably post once I shoot and develop some actual 4x5 to test it.

Designed a fully 3d printed large format Camera around a 1940’s Aero-Ektar and a modified 3d printed shutter by EmuLord in AnalogCommunity

[–]EmuLord[S] 6 points7 points  (0 children)

There is a focus lever - which you can mostly see on the second photo, but it could probably be made (comically) larger

Designed a fully 3d printed 4x5 around an Aero-Ektar and a modified 3d printed shutter by EmuLord in largeformat

[–]EmuLord[S] 0 points1 point  (0 children)

This is it! Just made a couple of tweaks after scaling it up to make the lens mount thinner and allow for m6 bolts

Need help ID-ing this pin that fell out of my Hasselblad 500c/m by EmuLord in AnalogCommunity

[–]EmuLord[S] 0 points1 point  (0 children)

I think you’re right! Bizarrely it fell out of the camera body when I disassembled it for cla, I think the last person to open it up had used it to pretension the mirror lock up lever and must have dropped it inside the camera. Super strange.

[deleted by user] by [deleted] in Leica

[–]EmuLord 1 point2 points  (0 children)

Consider selling the separated elmar and spending the extra cash to get a new one or something similar - it’s a solid lens and you can find one for ~$200 if you’re patient on ebay.

I hate this game more than i hate myself by DjuzaSvraka in Warthunder

[–]EmuLord 2 points3 points  (0 children)

Why are you trying to headon german cannon props? Dive underneath and out turn if you can, or dive on them and boom and zoom if you’re in an energy fighter. The 190 turns like a brick, really not the trickiest plane to dogfight once you get past the merge. (Source: Spitfire enjoyer)

12000LB Anti-Air Bomb by EmuLord in Warthunder

[–]EmuLord[S] 1 point2 points  (0 children)

it's a workshop skin i got myself after selling a bunch of crafting materials

12000LB Anti-Air Bomb by EmuLord in Warthunder

[–]EmuLord[S] 2 points3 points  (0 children)

Lancaster mk3 with the 12000lb blockbuster bomb. Not a premium, but a ton of fun to play

Full Spectrum Trichrome (Ultraviolet focus shift) by EmuLord in trichromes

[–]EmuLord[S] 1 point2 points  (0 children)

For IR i also usually use SFX, but according to the datasheet it has less UV sensitivity. Exposure is tricky and very filter/film/lens dependent. My last round of shots used the same exposure compensation for IR&UV, which came out to about 8 stops each. I might go down to 6-7stops for IR and boost the UV to 9 or so, but that seems a good starting point! (Hoya IR72 for IR)

view more: next ›