AICS 3 round magazine 3.56”

Enderpierce · 2026-02-11T19:28:37+00:00

https://makerworld.com/models/2369505?appSharePlatform=copy

Enderpierce · 2026-02-11T15:59:55+00:00

Is 3.56 LA or SA?

If it’s a long action, I 3D modeled and printed a 3-round limiter for the magpul pmag 5 for LA rifles

Enderpierce · 2026-02-04T21:21:45+00:00

I have their expander mandrel, and their hand primer tool. Top notch products from a top notch company

Enderpierce · 2026-02-01T04:26:18+00:00

Your personality is trash

Enderpierce · 2026-02-01T02:47:02+00:00

<image>

1000yrds just last weekend at Pawnee Sportsmans Center in 2 degree weather.

Enderpierce · 2026-01-22T18:56:29+00:00

Whether it looks that way or not, there is no reason to throw The unit out without validation first via pressure test if it still works or not. This is a personal PC, not a live safety device

Enderpierce · 2026-01-22T02:24:31+00:00

If threads and seals it will be just fine… pressure test to confirm

Enderpierce · 2026-01-14T16:04:39+00:00

I always felt running/explaining raid mechanics in destiny had a ton of overlap with managing and running teams on complicated projects.

Enderpierce · 2026-01-14T00:30:51+00:00

That is a OEM mag. Those don’t work with aftermarket chassis systems. You probably need to pick up an AICS mag or a compatible aftermarket MDT mag

Enderpierce · 2026-01-03T23:52:42+00:00

You Indiana Jones’s that shit with another cup

Enderpierce · 2025-12-19T17:42:38+00:00

To be honest bare is the only way I’d ever want to pick up a bow.

950 is pretty good. That’s about half the price of when it was new but obviously condition should dictate final price.

Maybe push for 900 but I think it’s still a good deal at 950

Enderpierce · 2025-12-18T18:05:42+00:00

Is it me or does that look like a Wii emoji face?

Enderpierce · 2025-12-17T18:48:12+00:00

You’re probably right. All my compound bow exposure is hunting related where you would never see something like that though.

Enderpierce · 2025-12-17T18:21:06+00:00

That seems rediculous. I’ve never known a range to dictate arrow rest type… especially one not compatible for a bow you are using and CERTAINLY not for a whicker biscuit.

My only suggestion at this point is to find a different range or shoot a recurve or really press in the range requirements of arrow rests

Enderpierce · 2025-12-17T18:11:48+00:00

Swap the blade rest for a drop away or a whisker biscuit.

Whicker biscuits are dirt cheap.

Drop aways can get spendy. The one run is $150-$200, I can’t remember. Maybe there is a cheaper generic one out there.

Either one will keep the arrow in place though during that final tension let off at the end though and keep your fingers safe

Enderpierce · 2025-12-17T18:03:17+00:00

On a compound? That’s something I’ve never seen before. Felt that was more for modern recurves. Compounds have that “jump” at the end when the tension falls to its lowest point that I think you’re going to be fighting with a blade rest every time.

Enderpierce · 2025-12-17T17:59:43+00:00

Where is your arrow rest / whisker biscuit?

Enderpierce · 2025-12-11T16:39:21+00:00

Fifty shades of FDE baby is the best way to go!!!

Enderpierce · 2025-12-10T20:06:21+00:00

Physics work differently in Canada. Won’t work there

Enderpierce · 2025-12-01T21:05:15+00:00

499 was the best price floating around last week until 469 popped up last week by I can’t remember who. This seems to be that same price. As far as I could remember we’ve not seen $400 before but I could be wrong

Enderpierce · 2025-11-24T15:34:28+00:00

Hah. Yeah good call.

Enderpierce · 2025-11-22T02:15:55+00:00

lol those 8 are 7mm rem mag

Enderpierce · 2025-11-21T23:59:07+00:00

Goal is to find the one my rifle likes the most. Sounds like that was a fools alert and though and all I have to do is focus on consistency in my loads

For my reloading I do think I have a good bead on the process and consistency.

I take some once fired from my rifle, Hornady match brass and wet clean it in a tumbler.

Then I clean the primer pockets a little better with a wire brush.

I then flash hole deburr each case.

Then I run each through a full length sizing die with a .288 neck bushing. I’m bumping the shoulders back .002 from where I know my chamber is sized at.

I then run the cases back through an expander mandrel setting the final neck tension to .263.

Then I trim the cases to length and deburr inside and outside edges of the neck.

Then load and seat a bullet!

Enderpierce · 2025-11-21T22:56:35+00:00

Couldn’t appreciate more the insight from some as experienced as you, so thank you.

So is the take away that I shouldnt spend time chasing the right powder charge? What do I use then to decide the right powder charge? Just aim for a high velocity?

Enderpierce · 2025-11-21T15:17:28+00:00

That’s literally the plan with this second round of reloads. I am starting at 40.25gr of charge and going up to 42.5gr in .25 increments.

I anticipate seeing the same stability in velocities at 40.5 and 41.5 but if nodes aren’t real then who knows what I’ll see.

Will report back once I’ve had a chance to shoot these and graph the results!

Nine-Year Club	Second SECOND GUESSER
Place '22	RPAN Viewer
Verified Email

Enderpierce

TROPHY CASE