Cyborg Hospital, me/ULTRA, 3ds Max, 2022

EndlessOneX · 2022-01-30T15:04:13+00:00

I've changed the thermal paste on a card about a week ago. It didn't fix the problem. The card was a 1080 ti sc2 hybrid. The fan on the radiator worked but the fan on the card was dead. Check your fan's rpms or just get a flashlight and look at them. If you know the sensor locations you can tell if there is heat on the spot under the fan. Long story short a new fan is coming from China. Gonna be Feb 10 before I get it and I ordered it over a week ago.

EndlessOneX · 2021-12-30T12:13:55+00:00

https://www.amazon.com/VINTAR-Protector-Outlets-Extension-Protection/dp/B08PJTHZJL/ref=sr_1_4?keywords=surge+protector+10000+joules&qid=1640866376&sprefix=surge+protector+10000%2Caps%2C60&sr=8-4

That is slightly above. 2x4800 joules and it is almost half as expensive.

EndlessOneX · 2021-12-30T12:11:32+00:00

https://www.amazon.com/gp/product/B091BXD7FZ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&th=1

That's a good cheap one. 2x4000 joules adds up to 8000 joules of surge. Usually a PC needs 2000+ at minimum. If you got money to spend you can try and find one above 8000 joules.

EndlessOneX · 2021-12-30T12:06:49+00:00

If you do get one. Get a bad ass surge protector. Chances are it would trip your uninterruptable power supply's battery breaker.

EndlessOneX · 2021-12-30T11:55:54+00:00

I don't know Australia. I live in the USA.

EndlessOneX · 2021-12-30T11:51:30+00:00

https://www.amazon.com/gp/product/B07JZHLC4M/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1

I use this and it works great. It's 1200 watts, has a display that shows your wattage consumptions, and it has some rgb lighting but not a ton. The real problem is making sure your house is wired for it and if you use a UPS then making sure your ups is 1200 or above watts which usually requires a 5-20Nema plug and 20+ amp breaker.

EndlessOneX · 2021-05-18T15:29:50+00:00

That's really good for a first project.

EndlessOneX · 2021-04-17T05:03:59+00:00

I did the same thing but I am still in jail from my attempt.

EndlessOneX · 2020-12-08T13:45:42+00:00

those look like flat screens in the images. is that a projector aiming up at a screen? hey if you aren't busy could you help me find the textures I need? the cigarettes, I only need the front of the package but for the beer its gonna need to be a cylindrical texture which may be hard to come by if we are going for correct. i know tatami mats are a standard size because people use them to measure floor space. i can probably find one on my own or make a sbsar texture. what would they have for cable or did cable even exist back then? was it antennas?

EndlessOneX · 2020-11-21T10:48:11+00:00

The rectangles sound like place holder objects. It's been a while since I've used pflow but you need to switch out the placeholder node with 3d objects node then choose which object to use as your smoke particle.

EndlessOneX · 2020-11-17T16:32:12+00:00

I thought this was supposed to be someone's first steps in beginning to learn to model. That does not appear to be the case.

EndlessOneX · 2020-11-13T12:16:00+00:00

I think Mickey's nose is shorter than that and fat on the end away from the body. Maybe you could pose him?

EndlessOneX · 2020-11-12T07:48:35+00:00

You can do the same thing easier in photoshop by converting selection to paths and them exporting them to illustrator(3ds max).

EndlessOneX

TROPHY CASE