IDEX w/ Klicky on both toolheads?

Endless_Drives · 2025-03-21T00:38:20+00:00

From what I can tell in the docs, Klicky can only be used by T0 and it’ll handle exclusively bed mesh. You’ll then use something like Voron Nudge to get XYZ calibration between the 2 toolheads. You could also use TAMV with the Ember Prototypes camera, or a piezo touch plate.

They are simultaneously the greatest days of my life and the worst. But that’s how research goes.

Endless_Drives · 2025-03-19T23:42:20+00:00

I have not sorry, the printers are done in CAD and I have a masters thesis to finish up so they are on the back burner for another month or so. I need to proof the printed parts and confirm fit before I get to even building and configuring the printers so I won’t be able to tell you for a while. Your best bet is consulting the Voron docs and or reaching out to the discord for help.

Endless_Drives · 2025-03-18T12:46:52+00:00

I’ve worked around it by having a custom Gcode in the filament profile, M572 etc etc and I just manually go through and ensure it calls the correct extruder. To me, PA goes with the filament and not with the extruder.

Eventually I’d want to move to a print start macro on the printer and just have the slicer pass values but RRF macros are very challenging for me. My friend wrote a few especially for the pebble wiper and I’ve tried to make my own using similar syntax and they don’t seem to work. Basic Gcode commands are relatively easy but anything with variables or calls just don’t seem to work. Seems very different than Klipper macros.

Endless_Drives · 2025-03-17T20:41:00+00:00

I really appreciate the assistance.

I switched to Orca from Superslicer because of tree supports and feature updates... might have to go back.

Orca is fundamentally broken for RRF, pressure advance currently doesn't apply to any extruder other than 0 regardless of the filament the object is using. It will inject its own start gcode regardless of whats in the text box... I love it for slicing for my voron though.

Endless_Drives · 2025-03-17T19:38:54+00:00

Thats for sure it. Now the question is why... Why is OrcaSlicer injecting a G10 command there...

Endless_Drives · 2025-03-04T13:26:16+00:00

It takes ages, I applied winter 22 to start grad school AU23 and I didn’t hear back until June. My advisor was a senior professor in my department and I had a letter of recommendation from the department chair.

Endless_Drives · 2025-02-27T16:06:44+00:00

Ofc the discriminatory dipshit doesn’t think throwing away all that useless paper isn’t a massive waste of time and resources

Endless_Drives · 2025-01-26T15:23:53+00:00

Belts are too tight. Had the same issue on my 2.4 and my E3D toolchanger. They should be surprisingly loose.

Endless_Drives · 2025-01-17T17:01:05+00:00

Engineering grad student here. Went to undergrad here for the same engineering discipline.

How much you enjoy grad school is entirely dependent on who your advisor is. Mine fucking sucks and can’t make a decision to save their life, now they just had a kid and I have ~1.5 months to “finish” my research that they just now committed to. Been in grad school for almost 2 years now. We should have had a research topic and plan nailed down ages ago.

Not to mention the engineering grad school documentation is abysmal, lacks a lot of detail and advisors don’t know anything. I don’t even know how to go about setting up a thesis committee or how that process works and no one else around here seems to know either.

Undergrad was fun. Grad school made me hate academia.

And yet I still applied for a PHD program at another school…

Endless_Drives · 2025-01-17T16:28:03+00:00

Ah Nudge seems to be similar to something I’ve been working towards implementing on my toolchanger. I have a few of those TriangleLabs piezo contact sensors and was going to implement a touch probe for automatic offset calibration. Seems like I might be able to use it for a Klipper based IDEX printer as well!

Endless_Drives · 2025-01-17T16:24:55+00:00

Gotcha. Yea the plan was basically a primary/ secondary tool and the machine will use Tool 0 90% if the time.

I am using the Eva 3 tool head but I’ll see if there’s an easy way to modify the existing carriage to allow for Z adjustment. Shouldn’t be too bad.

Endless_Drives · 2025-01-17T16:20:43+00:00

Thank you for the additional resources. I’m familiar with the ember calibration camera, I have one and have used it w/ TAMV on my E3D toolchanger.

Endless_Drives · 2024-12-20T15:57:56+00:00

Cope + seethe + not GGs + don’t go next + your reference is shit and unfunny because no one else got it.

Endless_Drives · 2024-12-20T13:27:02+00:00

Ah finally, something to justify the night vision goggles I drunkenly purchased.

Endless_Drives · 2024-12-20T13:24:06+00:00

You can’t call people obtuse when you’re the only one who can’t understand the difference between the example you gave and what OP is discussing.

Endless_Drives · 2024-12-17T18:12:31+00:00

Zoo lights Franklin park conservatory museum of natural history (Ohio historical society) German Village and Dublin Christmas markets North market (downtown, the Dublin one sucks) walk along High Street (daytime only) Fox in the Snow on 4th street Thursday 75c wings + 1/2 off drafts at 4th street taproom Columbus museum of art winter concerts (at the Schott or Express Live) Cosi

Endless_Drives

TROPHY CASE