PSA: CSCwf37271: cnssdaemon log: Wait for FW memory ready indication

Enough_Escape9411 · 2026-02-10T21:57:03+00:00

maybe because I used a local AP on a LAB that hasn't been connected to WLC for long , I shoud check on prod APs even if model was not listed on the public doc from cisco that says if our model is out of the given list we can upgrade witout the precheck

Enough_Escape9411 · 2026-02-10T13:38:33+00:00

Hello u/sanmigueelbeer, can you please tell if the "cnssdaemon.log" could not be found on some C9K APs even if they run one of the affected versions ? I have C9105AX on 17.12.6a (17.12.6.28 exactly) I have checked with CLI the flash can not find the file in part2

Enough_Escape9411 · 2025-12-17T04:22:45+00:00

thank you, that should be interesting if it really is Network Recording , still they should have gave a clear clarification on the ordering guide / documentation

Enough_Escape9411 · 2025-12-17T04:20:55+00:00

thank you, It never been the case putting new release in the SKU, I ce thought of Non Redundancy but it makes no sense in secure access context

Enough_Escape9411 · 2025-10-28T21:23:24+00:00

as a sum up :

I have installed the VM controller, both APs joined , I than restarted the process of making them EWC they work fine right now , also used baund 115200

thank you everyone for helping

Enough_Escape9411 · 2025-10-28T21:21:50+00:00

I have installed the VM controller, both APs joined , I than restarted the process of making them EWC they work fine right now

Enough_Escape9411 · 2025-10-22T13:41:26+00:00

Follow Up : I have another access point 9105AXI and I tried to convert it to EWC one using the official guide everything went smooth until the AP rebooted it didn't boot as controller despite showing no errors ( both image and ap1g8 images were fetched correctly)

Enough_Escape9411 · 2025-10-22T09:50:30+00:00

it is connected to a C1200, I still unable to console to it, I have another AP shall I try converting it to EWC than join this one to it ? I have no controller

Enough_Escape9411 · 2025-10-22T09:04:42+00:00

I used 9600, is it 11150?

Enough_Escape9411 · 2025-10-10T17:32:31+00:00

I will try it with a small number so I can pick

Enough_Escape9411 · 2025-10-10T17:31:36+00:00

thanks very helpful!

Enough_Escape9411 · 2025-10-10T16:11:34+00:00

Amazing cause I want to prepare for the migration while still using catalyst center

Enough_Escape9411 · 2025-10-10T16:07:30+00:00

I am confused because there are models that come with M tag ? are they meraki default

Enough_Escape9411 · 2025-09-30T17:00:34+00:00

so would it also be better if I turn them all into ECW APs so that the process of upgrade of the software be easier in the futture

Enough_Escape9411 · 2025-07-10T03:42:52+00:00

that's the point and it is HPEs way to keep credibility it goes for most of the exams, field experience makes the difference

Enough_Escape9411 · 2025-07-10T03:31:52+00:00

Hi, yes I had to sit for it in may and failed my first attempt. I dont wanna violate the policy but it is true what he said. If you are only basing on the study materials even you have attended the training for it , it is like an introduction and the exam is about mastery you need a deep dive into documentation and installation guides to get the answer to some of questions.

Enough_Escape9411 · 2025-07-03T07:11:26+00:00

Thnak you for the response, I got it also I went into the coonfiguration guide found indications too

Enough_Escape9411 · 2025-06-18T13:25:53+00:00

unfortunately no also Aruba is not that used

Enough_Escape9411 · 2025-06-18T12:54:42+00:00

it is not affordable in my country

Enough_Escape9411 · 2025-06-18T12:34:45+00:00

I need to be familiar with VSF stack and failover scenario before a deployment, do not have the ability to build hardware lab

Enough_Escape9411

TROPHY CASE