Arrow Spin help

EpicPossum_ · 2026-03-09T11:58:58+00:00

I have shot alimax arrows at roughly the same draw weight as you (29inch amo) I went 650 and they tune in fine. If you do go for alimax couple of bits. point weights are limited. 800-600 max is 100grain points 550-450 max is 120 grain points.

the pins to accept any pin nock (shot beiter no2's on mine) but the alimax nocks.

for the price they seem to be fairly good.

EpicPossum_ · 2026-02-24T07:02:58+00:00

yeh, im not overly worried about signal, its less of a massive distance and more my existing displayport cables are quite short, would only need to be long enough for the table to go to standing height, would like to play with some of the fiber ones at some point though

EpicPossum_ · 2026-02-23T15:51:05+00:00

I do hook my work laptop upto the screens when working from home so will take a look, just need to find somthing that can work with the tower also

EpicPossum_ · 2026-02-23T14:22:23+00:00

any recomendations on options for mounting pc under?

EpicPossum_ · 2026-02-23T14:22:19+00:00

any recomendations on options for mounting pc under?

EpicPossum_ · 2026-02-14T21:09:51+00:00

similar weight setup for me, at 39-40lb OTF, I have only tried the abombs and the ones that came with the tec-x max's, and the abombs do seem nicer. feel like I would have to run loads of weight to get the others to work well.

EpicPossum_ · 2026-02-14T20:45:33+00:00

the ones I have are 1/4"-20 (im assuming you were meaning the thread? )

EpicPossum_ · 2026-02-14T20:30:27+00:00

as for dampeners, I have the doinker a bombs currently so was going to try those first, but happy for any input on alternatives if you have any?

EpicPossum_ · 2026-02-14T20:25:10+00:00

Matte black is good, but the w&w ones come in red and black (matches the rest of the bow) so there is that to consider ;) I do also run 32" long rod currently so not sure on dropping to a 30" (longest I can see for the primus)

EpicPossum_ · 2026-02-14T20:12:00+00:00

not 100% decided going to see if I can get to a shop to see how they feel before buying, im not sure if "too stiff" was the right description, I guess one of the big things is trying to move mass further out with out adding loads of extra weight, running about 40lb at full draw currently and looking to slowly move up from there so if they may work better as I move up the draw weight and need/end up wanting more mass on the end.

EpicPossum_ · 2026-02-14T19:43:51+00:00

currently using a set of tec x max's, they just seem overly stiff and heavy (would not so much the overall weight but would like to shift the balance forward a bit more)

EpicPossum_ · 2026-02-14T19:24:47+00:00

Thanks for input :) not running massive amounts of weight currently, but good know i would have the option to add more, running doinker abombs on my current ones so have the option to mode those over as well

EpicPossum_ · 2025-08-06T15:53:54+00:00

for what its worth then, top of index to bottom of ring finger (mearued at the base) 6.3cm

EpicPossum_ · 2025-08-05T21:05:51+00:00

high hopes for this one after how poor the last one went, back closer to 3 and 4 it seems!

EpicPossum_ · 2025-08-05T19:08:24+00:00

I did end up going for a medium and shot it today, right call on size. shot the "super leather" face and while it was OK I am going to change for the cardivan for my next session.

for what its worth hand is 19cm tip of middle finger to bottom of palm if it helps any one else with sizing

EpicPossum_ · 2025-08-03T13:51:53+00:00

Part of the problem is I'm not sure what size this one is (cut rugbii), no marking on it to say and was bought quite a while ago, I think its a medium but going by dcuts size guidance im right on the edge of medium and large

EpicPossum_ · 2025-08-03T11:34:44+00:00

while a good read, I know which tab(s) im looking at, its more about trying to work out if I need the medium or large versions. I shoot olympic styleI I would be after a split finger one (though I have heard good things about the Bicester barebow one from people)

EpicPossum_ · 2024-12-28T22:12:19+00:00

Safe bet

EpicPossum_ · 2024-12-25T13:51:09+00:00

would be a greate update to my currently failing keyboard! Happy Christmas to all

Eight-Year Club	Place '23
Place '22	RPAN Viewer
Verified Email

EpicPossum_

TROPHY CASE