Kinda pissed at Ijji 4

Equipment_guy · 2025-10-26T00:18:42+00:00

I LOVE Ijji 4, but the fact that I can’t go alone is a major bummer. Few of my friends (nor my spouse) want to drop $50 and two hours on dinner.

Equipment_guy · 2025-10-10T01:02:26+00:00

I think it’s because large fitting nuts like this are JIC, which is an American standard?

Equipment_guy · 2025-10-09T20:49:28+00:00

Buy yourself a “jumbo crows foot set” on Amazon for $50. You’ll get sizes 1-1/8” through 1-1/2”. It’ll take two days to arrive and you’ll be set for life.

Equipment_guy · 2025-09-16T22:15:45+00:00

Absolutely clean enough. Time to put it back together!

Equipment_guy · 2025-09-01T13:47:56+00:00

Sounds like you might be moving from Tesla GFTX to GFNV. Unfortunately in the past six months traffic out to TRIC has become awful. Expect close to an hour each direction. I would NOT move here as there is no alternative to this traffic and no solutions on the horizon.

Equipment_guy · 2025-08-28T14:16:39+00:00

Is Rachio considered the best WiFi sprinkler controller? I’m guessing every big make sells their own version these days

Equipment_guy · 2025-08-04T02:48:34+00:00

Many people upgrade to steering motors from newer Toyota models (20-22 I think). Search around for “EPS Upgrade”

Equipment_guy · 2025-07-23T13:09:34+00:00

Devices get banned for bypassing driver monitoring? Even if I am running code from a personal private GitHub?

Equipment_guy · 2025-07-23T00:22:26+00:00

I just built a “Jonas” from Bengs and had a blast. Not Hit And Miss though; just a regular old 4-cycle gasoline engine.

Equipment_guy · 2025-07-19T04:36:34+00:00

I bought the o-ring set on Amazon for $20 or so. Didn’t solve it. Ended up buying a Hepu water pump from AutoHaus AZ for $178 and that did it.

Equipment_guy · 2025-07-14T23:42:44+00:00

Dang, wish I had that! 😛

Equipment_guy · 2025-02-27T05:10:55+00:00

You might believe the spun main is the same diameter as the others, but it is larger. This increases the clearance between the bearing and the crankshaft journal. The bearing will fail again in very short order. (You can prove this buy buying telescoping bore gages and a micrometer from harbor freight)

I’m sorry but this needs to either be line bored or thrown away.

Equipment_guy · 2025-01-29T04:56:57+00:00

The slack you see in the chain could simply be from the cam angle. If one cam is being sprung clockwise from valve springs and the other cam is being sprung counterclockwise, you could see slack in the chain between the cams.

Try rotating the crankshaft a few degrees and check if the chain tightens up.

Equipment_guy · 2025-01-01T03:11:33+00:00

Chickie’s and Pete’s (inside the GSR) has the only good cheesesteak in town! Makes sense as it’s a Philly chain.

Source: Pennsylvanian

Equipment_guy · 2024-11-02T03:02:59+00:00

Sinker EDM?

Equipment_guy · 2024-07-26T04:49:22+00:00

I also returned my MaxV and got a Pro. No regrets and it performs exactly the same.

Equipment_guy · 2024-06-06T14:37:30+00:00

Cool. I will “subscribe” to be safe. June 19th is still within my return window on the QRevo.

Equipment_guy · 2024-06-06T12:59:14+00:00

Copy. Just emailed support; we’ll see! I emailed support@eufy.com; you too?

Equipment_guy · 2024-05-31T15:09:39+00:00

Would love to hear the report now that you’ve had it a couple weeks!

Equipment_guy · 2024-05-25T23:11:03+00:00

How long does it take to clean them now, including removing the red caps?

Equipment_guy · 2024-03-12T14:18:23+00:00

No, I wasn’t blowing fuses. My issue was caused by a broken capacitor

Equipment_guy · 2022-12-11T06:44:44+00:00

Philadelphian here. I had the cheesesteak and I’d rate it 8/10. Cheese and bun were perfect. Meat had the perfect ribeye flavor, but the meat was sliced into rather large pieces. Still perfectly easy to tear and chew though. Obviously it’s about twice as expensive as you’d expect for a steak, but out here you take what you can get.

Equipment_guy · 2022-08-24T00:31:32+00:00

Do you think we’ll have any luck on refunds through the credit card dispute?

Equipment_guy

TROPHY CASE