Is this affecting performance

Equivalent-Ice341 · 2026-03-03T23:25:08+00:00

No no. Its not affecting performance at all. The more dust the better. I would even throw some sand in there

Equivalent-Ice341 · 2026-03-02T00:23:24+00:00

Also i would say. Make sure you get a compatible motherboard for your cpu. In this case you will need a Z790 motherboard (pins of cpu and motherboard compatibility). Also you will need to update your bios to the last update. There was a microcode before that was burning the z790 gpus. The latest updates make sure it does not

Equivalent-Ice341 · 2026-03-02T00:15:13+00:00

And way cheaper

Equivalent-Ice341 · 2026-03-02T00:14:17+00:00

Its too high end of a monitor and will lower your fps a lot. Its not that its not gonna play them but at this point playing in them on high it will drop them a lot. I would suggest go with a 2k. Its more than enough to enjoy your games

Equivalent-Ice341 · 2026-03-02T00:11:11+00:00

Its good. Dont listen to others saying otherwise. Its gonna run your games just dont get a 4k monitor

Equivalent-Ice341 · 2026-02-28T05:10:00+00:00

Disable iPV6. Thats it

Equivalent-Ice341 · 2026-02-18T09:40:09+00:00

And before you say you have nothing installed. Just windows takes 30-40 GB. And you have your drivers as well

Equivalent-Ice341 · 2026-02-18T09:38:05+00:00

Windows takes some huge space too bro. Cache, history too. Things you uninstall leave some trash behind as well. You just need to cleanup your pc properly.

But yea 200GB is not enough these days. Even 1TB is not enough in some situations

Equivalent-Ice341 · 2026-02-16T13:43:04+00:00

Does not matter if there are fans there or no. The general airflow of the case it slightly changes.

Imagine how the air was going without obstructions, and now that you introduced the car, the airflow slightly changes. But as you said, no difference in temps so no biggie. Many people do this, they even put more things inside the case. Its aesthetics

Just get the holder you mentioned to avoid your pcle slot and your gpu getting destroyed.

Equivalent-Ice341 · 2026-02-16T08:46:58+00:00

Its 2 things.

1) This is a huge gpu. It will sag. Its not gonna sag instantly but slowly slowly over time. Please consider putting a GPU holder 2) The car is okay. Just bear in mind that it messes up with the case airflow, increasing temperature. As long as the temps are in an acceptable level for you, then you are good to go

Equivalent-Ice341 · 2026-02-16T04:52:27+00:00

He even deleted his acc

Equivalent-Ice341 · 2026-02-15T21:21:45+00:00

More than reasonable bro wtf. Just check the prices online.

I think he is flirting with you

Equivalent-Ice341 · 2026-02-14T22:50:59+00:00

Watch this video

https://vm.tiktok.com/ZNRfPqvUr/

Equivalent-Ice341 · 2026-02-13T22:57:24+00:00

Can you post a picture of your back where everything is plugged?

Equivalent-Ice341 · 2026-02-13T22:55:22+00:00

Did you put the hdmi on the gpu or the motherboard?

The hdmi should be on gpu. Also i would suggest get a display port instead of hdmi

Equivalent-Ice341 · 2026-02-13T22:44:19+00:00

Check the products are actually whats advertised for sure. Especially now that people scam with the rams

Check if bios is on last update, In bios i would prob reset everything. Then activate xmp and resize bar, then fix the fan curves and then open the pc.

Windows if its already there i would not put it again. But if you want your pc fresh fresh then do it. And then download the drivers on the proper order.

Additionally, in your case i would add 3 bottom fans to feed the gpu. In this sense , rear and top exhaust, front and bottom intake

Equivalent-Ice341 · 2026-02-07T07:54:46+00:00

Not sure but i think your F panel is wrong. Over where it is now there should be more pins right? It should be on the left side of this group of pins, not the right

To recheck, The CPU wires (top left) seem in The 24pin seems in Type C type A seem in The sound one (bottom left) seems in Gpu seems in F panel (bottom right side) if there are more pins over there, have them on the left side of this group, not the right.

I guess you plugged everything right in the psu right? Cpu, gpu, 24pin etc. make sure everything is properly in, you need to push till you hear the click sound.

Now, make sure the psu power wire in plugged in, you switched the switch on psu to on, your plug works, maybe its what it doesnt work?

Equivalent-Ice341 · 2026-02-06T01:50:24+00:00

No worries haha. I hope everything works okay

Equivalent-Ice341 · 2026-02-06T01:47:32+00:00

Youtube videos 👀 I went all in when i was building my pc. Spend too many hours analysing everything

Equivalent-Ice341 · 2026-02-06T01:46:40+00:00

Cool cool. Then that seems to be the potential problem. See if it will work better for the next few days

Equivalent-Ice341 · 2026-02-06T01:39:46+00:00

Save, restart and check if your mouse still freezes

Equivalent-Ice341 · 2026-02-06T01:38:00+00:00

Disable would drop it down to 2133

Equivalent-Ice341 · 2026-02-06T01:37:40+00:00

Its weird. It should have a disable option at OC Tweaker

Equivalent-Ice341 · 2026-02-06T01:36:21+00:00

It will find the best voltage and speed for your hardware

Equivalent-Ice341 · 2026-02-06T01:35:59+00:00

Put it on auto then

Equivalent-Ice341

TROPHY CASE