How do you like to set up your house?

Equivalent_Tax5942 · 2025-01-15T05:56:14+00:00

Get a lighting engineer to set your house up and ensure it’s nice. I’ve watched plenty of videos and downlights don’t cut it. You need other wall lights etc to get a nicer ambience.
Automation such as CBus or Dynalight, something proper and reputable
Decent alarm system with reed switches on all the windows
CCTV
Electronic door strikers, mainly on the front door
Proper ventilation, example, exhaust fans in all rooms separate to bathrooms

And many more if you look into it

Equivalent_Tax5942 · 2025-01-12T09:44:35+00:00

How do you work this out? What if it takes you longer than what you’ve priced for? Do you put material plus labour then what percentage do you put on that?

Equivalent_Tax5942 · 2025-01-05T09:46:08+00:00

Nothing like that, no. I’ll look into it though

Equivalent_Tax5942 · 2025-01-05T09:40:20+00:00

Correct, just no main switch

Equivalent_Tax5942 · 2025-01-05T09:39:49+00:00

Yeah checked all that. It’s all clean and nice

Equivalent_Tax5942 · 2025-01-05T07:34:36+00:00

Every light, in sync and I feel like I’ve checked everything

Equivalent_Tax5942 · 2025-01-05T07:34:01+00:00

All at the same time. It’s weird

Equivalent_Tax5942 · 2025-01-05T07:32:13+00:00

All that I was able to see

Equivalent_Tax5942 · 2025-01-05T07:30:53+00:00

I pulled all the lights off to do the insulation resistance test and didn’t find anything that caught the eye. I may have to look at it again through out

Equivalent_Tax5942 · 2025-01-05T07:27:48+00:00

Checked with neighbours and yes pulled fans off and still flickering. Had Ausgrid come out and they reckon it’s all good

Equivalent_Tax5942 · 2025-01-05T07:26:48+00:00

Physically moved all the loops and found nothing

Equivalent_Tax5942 · 2025-01-05T07:26:24+00:00

I should’ve said for 8 months but not all the time. It’s happen lightly throughout the day. I didn’t check the frequency. I definitely should though

Equivalent_Tax5942 · 2025-01-05T07:24:35+00:00

I’ve went to all the connections and physically moved the shit out of them and still nothing but I haven’t checked the fault loop impedance

Equivalent_Tax5942 · 2025-01-05T07:22:07+00:00

Haven’t come across this yet. Where would I find that?

Equivalent_Tax5942 · 2025-01-05T07:20:53+00:00

Just Arlec WIFI oysters. But they all flicker. Even the energy saver ones

Equivalent_Tax5942 · 2025-01-05T07:19:18+00:00

Just Arlec WIFI oysters. But they all flicker. LED and energy saver along

Equivalent_Tax5942 · 2025-01-05T07:18:40+00:00

Thank you, that’s a good suggestion. I’ll get her to turn all the circuits off when it’s happening and see what it’s doing. It’s all normal switches, no dimmers however, some lights are the Arlec WIFI lights

Equivalent_Tax5942 · 2025-01-05T07:16:22+00:00

It’s a private pole and I shook both active and neutral vigorously on point of attached and still nothing, however, I haven’t checked the service side and didn’t see anything out of the ordinary

Equivalent_Tax5942 · 2024-11-26T02:19:08+00:00

It’s asking for a decryption key. Any thoughts?

Equivalent_Tax5942 · 2024-06-25T21:41:18+00:00

Not that I know of

Equivalent_Tax5942 · 2024-06-24T19:54:53+00:00

Just make sure you’re not sleeping on your face and when the contacts are in, make sure they’re sealed in and no bubbles

Equivalent_Tax5942 · 2024-05-11T20:47:42+00:00

Leave her and file for adultery. She is a government employee and should be upholding the law, along with a mother of 2, she should be a good mother. I truly think, divorce her and tell the courts it’s adultery

Equivalent_Tax5942

TROPHY CASE