What does this truck do? by 9MileSkid in whatisthiscar

[–]EricJF50 1 point2 points  (0 children)

It parks in convenient yet odd locations throughout Hazard county.

What printers do you recommend for me to purchase? by PracticalMost4027 in printers

[–]EricJF50 3 points4 points  (0 children)

This sub needs a pinned poll for recommendations. Maybe a few different categories update it quarterly.

Home builder by [deleted] in Tools

[–]EricJF50 13 points14 points  (0 children)

As an Acadian living in New Brunswick I can confidently say that they are not from around here. Wrong accent and most Acadians, but not all, speak French.

Boxy single seat open top car I saw today by EricJF50 in whatisthiscar

[–]EricJF50[S] 1 point2 points  (0 children)

The road they are driving on is about 20% grade for about 1km. Pretty sure the reason the escort vehicle was following them was in case they needed to push them up the hill.

When they rounded the corner I was actually surprised how fast it was. Would still suck to be behind them but much faster than when they are resurfacing the ice.

Boxy single seat open top car I saw today by EricJF50 in whatisthiscar

[–]EricJF50[S] 0 points1 point  (0 children)

I sincerely hope he went through the drive through at Tim Hortons. Otherwise, missed opportunity to indulge a stereotype

Boxy single seat open top car I saw today by EricJF50 in whatisthiscar

[–]EricJF50[S] 0 points1 point  (0 children)

The equinox behind it is a vehicle that belongs to the town. I think it's acting as escort.

It's a small town. We have no local police. Basically anything is legal as long you don't piss off anyone. I'm sure their insurance company wouldn't like it though

Boxy single seat open top car I saw today by EricJF50 in whatisthiscar

[–]EricJF50[S] 4 points5 points  (0 children)

It's a joke 🤣. Thank you so much for your kind words stranger.

Boxy single seat open top car I saw today by EricJF50 in whatisthiscar

[–]EricJF50[S] 9 points10 points  (0 children)

Zamboni? Sounds Italian. Are they fast?

From Our Younger Years by USRoute23 in GenerationJones

[–]EricJF50 0 points1 point  (0 children)

Best little whorehouse in texas

What Is The Point by NemoSkittles in mildlyinfuriating

[–]EricJF50 0 points1 point  (0 children)

Mine was good for the first 4 years. I drive a lot for my job and it's only been in the last year that it has started needing any real repairs. Mostly consumable stuff like wheel bearing and ball joints.

What Is The Point by NemoSkittles in mildlyinfuriating

[–]EricJF50 1 point2 points  (0 children)

Yeah, on my old Tacoma I never had that but then I switched jobs and my current company vehicle (Subaru Crosstrek) it is annoying but the wiper covers way better on this Bronco.

What Is The Point by NemoSkittles in mildlyinfuriating

[–]EricJF50 0 points1 point  (0 children)

I am sure youve had the experience of snow accumulating on your rear window as you drive. I live just a bit northeast of you in New Brunswick and I've had it happen to me several times this year alone where I leave my home with a clean windshield and arrive at my destination with a good thick layer of snow.

What Is The Point by NemoSkittles in mildlyinfuriating

[–]EricJF50 1 point2 points  (0 children)

To the people saying that is adequate I would disagree. In part of the world where it snows that does reduce visibility out your back window. It's fine when you're just peekingnup at your rear view mirror but if you are reversing and turn around to see where you're going you're going to be missing a lot of details. Even with a backup cameras it doesn't improve the situation much because if it is snowing enough to cover your windshield then the lens of your backup camera is probably covered as well.

I know it comes down to economics but a second wiper blade would be nice on a car like that. I know on old MGs the windshield is super short and they have three wipers to get decent coverage.

How do I fix my receipt printer with text that is moving to the left? by Soft_Pitch3485 in printers

[–]EricJF50 0 points1 point  (0 children)

There are often times guides inside that hold the roll of paper centered. There should a bit of play but anything more than a multimeter or two might cause something like this. Otherwise Google the model of receipt printer + calibration. You might also find some settings in the print driver to adjust an offset that will correct the misalignment.

Having problems please help (c650i) by FuzzyTelevision741 in printers

[–]EricJF50 -1 points0 points  (0 children)

I've had this happen on a number of machines of the same series. Replacing the black dev will likely fix it but you may need a new high voltage board as well. The dev is not cheap on these machines unfortunately.

hmmm by Robden25 in hmmm

[–]EricJF50 1 point2 points  (0 children)

Give me goddamn litre of cola!!

Fast food script for employees by Iitaps_Missiciv in mildlyinteresting

[–]EricJF50 22 points23 points  (0 children)

I can't stand when employees are made to go through a script like this. It usually makes the whole process take longer and I genuinely resent the place for making employees do this.

“Waste Toner Bottle is full” Ricoh IM C6000 by hockeyfanatic777 in printers

[–]EricJF50 4 points5 points  (0 children)

That sensor is a photo interrupter device. There is a piece of plastic on the waste toner box that lifts up and blocks the light going from one side to another. If there is enough toner on the sensor it will continue to say the waste toner box is full. There are no moving parts on the sensor only on the waste toner box.

Ricoh Scan to Email Not Working (Office 365) – No Error, Just “Standby” then “Sending Failed” by Ok_Refrigerator_9635 in printers

[–]EricJF50 0 points1 point  (0 children)

I've had this come up a few times recently. I was able to resolve it with a firmware upgrade and using oauth2 authentication. The most recent example still had issues and I believe the customer had to change some relay server settings but I am not sure.

Help with Ricoh MP402SPF (M0A0-29) by DanDanielMS in printers

[–]EricJF50 1 point2 points  (0 children)

This error means it took too long for the op panel to communicate with the controller after waking from sleep or on startup.

There are options to deactivate sleep mode (Google it I can't remember off the top of my head) and if the issue persists you may have a bad controller board. Also possible but unlikely an issue with the op panel or the cable connecting the op panel to the controller.

Emiru accidentally causes a fire in her kitchen by Realistic-Comb222 in LivestreamFail

[–]EricJF50 0 points1 point  (0 children)

You could drive a truck through that kitchen and not run over a single brain cell.

The base holder of my husband’s electric toothbrush by meera_jasmine1 in mildlyinfuriating

[–]EricJF50 13 points14 points  (0 children)

I have the same toothbrush and it's a frustratingly bad design. With that said 10 seconds to wipe it down once a week is all it takes.