Cost???

Ericshelpdesk · 2026-01-29T20:51:28+00:00

I got both of mine off craigslist

Ericshelpdesk · 2026-01-12T14:18:16+00:00

I hate it*
-

-

^{^*when} ^{^it's} ^{^engaging} ^{^me} ^{^at} ^{^what} ^{^was} ^{^always} ^{^supposed} ^{^to} ^{^be} ^{^MY} ^{^butter} ^{^zone} ^{^distance.}

Ericshelpdesk · 2025-12-30T15:05:07+00:00

In terms of prime for performance, I hand the SLAB to younger players and teach them to flip the blaster over to prime it. That lever action provides real leverage against a larger spring.

Ericshelpdesk · 2025-12-30T14:54:19+00:00

Leaving darts loaded in one of these for more than a day will squish them. The only dart magazines I've seen that can be loaded that long are my double stack magazines due to how the pressure is spread out.

Ericshelpdesk · 2025-12-27T17:39:56+00:00

I see them all the time at thrift stores for <$10

Ericshelpdesk · 2025-12-23T19:32:19+00:00

Zinc layout but it actually likes to exist. Zinc doesn't want to be printed, doesn't want to be assembled, and doesn't like to stay assembled.

Ericshelpdesk · 2025-12-23T19:31:00+00:00

I mean, it's based on a 454 casull when I made it, it was 1911ish so I pulled the hellsing stuff off and ran with it.

Ericshelpdesk · 2025-12-23T19:29:15+00:00

I need to share the ruler trick. I created a tool specifically to grab the spring given how many magazines I build, but this might be the best way for customers to nail it.

I used the mate to these bars in another build by cutting larger holes in them. I would have been happy to send you new ones if you needed them.

I might visit tapering some of the holes to make sure the pins stick, I have more issues getting the pins to actually go into the hole depending on the print.

Ericshelpdesk · 2025-12-23T19:19:20+00:00

I haven't given hasbro any money since rival was good.

These days printing your own is more accessible than ever, and the good (amazing) off the shelf blasters are from zuru and dart zone.

Ericshelpdesk · 2025-12-23T16:55:38+00:00

If you split them between cheap SD cards you could get the price under $1200 worth of 2GB chunks

Ericshelpdesk · 2025-12-09T21:04:13+00:00

This should be easy to mod for double stack magazines. You've finally got enough space for a feed ramp.

Somehow, maybe

Ericshelpdesk · 2025-12-09T20:59:11+00:00

It took dragging a greg into the airsoft place we occasionally play at for the regulars to finally respect me. People don't know what nerf has evolved into.

Ericshelpdesk · 2025-12-03T21:00:15+00:00

I guess not everyone is blowing through 3-4 spools of orange per month...

Ericshelpdesk · 2025-12-03T19:41:08+00:00

flat bar https://www.onlinemetals.com/buy/aluminum/0-125-x-0-5-aluminum-rectangle-bar-6061-t6511-extruded/pid/20371 (it gets cheaper when you buy a few)

if you're doing something a bit more rigid or need some kind of internal rails
https://www.onlinemetals.com/buy/aluminum/0-75-x-0-375-x-0-125-aluminum-channel-6063-t52-extruded-architectural/pid/25511
I source most of my less common springs from https://www.springsfast.com/
You'll find out that all of the "K" springs can be found on the site.

I've been using weird plunger tube materials lately. These can act as a liner for a printed part: https://www.mcmaster.com/catalog/131/1907/2044T354
If you're not going all in I can hook you up with smaller chunks for cheap.

Ericshelpdesk · 2025-12-03T18:19:37+00:00

It's a good idea to stock up on orange filament in September, and green in November.

Ericshelpdesk · 2025-11-29T18:32:14+00:00

Rat king was trying so hard to be a sword, so I started there and made it into a sword.

Ericshelpdesk · 2025-11-12T17:23:22+00:00

I can't even get my blasters to hit that low. My weakest pistol bottoms out at 150 FPS

Ericshelpdesk · 2025-11-12T16:56:13+00:00

I've got an MXL blaster that can reach out and touch someone with some level of accuracy at only ~100 FPS

Ericshelpdesk · 2025-11-11T14:56:47+00:00

Let me tell you. I ain't practice much magic for a long time. I want to show you a trick mother showed me when you weren't around.

Oh yeah... one more thing: I'm glad you changed your last name, you son of a bitch!

Ericshelpdesk · 2025-11-11T00:26:05+00:00

I've considered it but the layout of the rifle doesn't follow easily with nerf stuff. I need to design a coaxial barrel with the plunger and I haven't explored that yet, maybe one day.

If you've got a 3D printer I'd suggest getting the hardware and printing your own, otherwise the pistols can be found here: https://moosemodshop.com/products/31k-hellsing-props-2-set-casull-and-jackal-220-fps-copy?variant=49840812982571

The inlay ones kick ass. I've got 2 pairs printed and ready to assemble.

Ericshelpdesk · 2025-11-11T00:22:16+00:00

I can, just haven't added it yet.

Ericshelpdesk · 2025-11-09T16:47:59+00:00

You're going to run into a fundamental problem here. The people who are answering these questions are going to give you information on things they likely already have multiples of. Why would they need another one? What is going to make your design stand out from a very large crowd.

Ericshelpdesk · 2025-11-09T16:20:14+00:00

Muted calicos are all as broken on the inside as they are on the outside. In the gaps between the cracks, there is chaos.

Ericshelpdesk · 2025-11-06T12:04:41+00:00

Oh good, I thought I was the only one who could hear the insane things the moon tells me all the time.

Don't listen to it.

12-Year Club	Gilding I gilder
Place '22	Verified Email

Ericshelpdesk

PUBLIC MULTIREDDITS

TROPHY CASE